This study divided the area capable of producing domestic forage into grazing pasture, hay production area, and silage crop area, calculated the required area according to the forage production volume, and examined whether self-sufficiency in forage leads to cost savings. When the self-sufficiency rate of forage for dairy cows and Hanwoo is 80%, the improvement in profitability per heaf ranges from 3% to 9%, typically around 5%, which is considered a significant benefit for both corporate and individual businesses. The average profit per ranch is expected to increase about KRW 50 million per year, and the country as a whole is expected to reduce forage costs by KRW 0.9 trillion per year. Recently, efforts are being made by the government and local authorities to cultivate summer forage at the rice fields for improving self-sufficiency in forage feed to stabilize rice supply and demand. Furthermore, it is also necessary to conduct research on reducing the cost of concentrated feed and TMR (Total mixed ration).

본 연구는 식물공장에서 아쿠아포닉스와 수경재배에서 재배된 딸기의 무기양분 흡수율, 생육, 수량을 비 교하고자 수행되었다. 양어는 비단잉어(Cyprinus carpio) 12마리를 수조(W 0.7m × L 1.5m × H 0.45m, 472.5L)에 367.5L 물을 채운 후 입식하였고 5.44kg·m-3 밀도로 사육하였다. 딸기 모종 30개체는 펄라이트를 채운 포트에 정식 하여 아쿠아포닉스 시스템 베드(W 0.7m × L 1.5m × H 0.22m)에 장착하였고, 모종 30개체는 네트포트에 정식한 후 담액수경(DFT)시스템 베드(W 0.7m × L 1.5m × H 0.22m)의 아크릴판(140 cm × 60 cm, Ø80 mm)에 장착하였다. 재 배기간 동안 아쿠아포닉스 수조액의 pH와 EC는 각각 4.3－6.9, 0.32－1.14dS·m-1 수준이었고, 수경재배는 각각 5.1 －7.5, 1.0－1.8dS·m-1이었다. 아쿠아포닉스 수조액의 NO3-N와 NH4-N 농도는 수경재배보다 각각 약 3.6, 2.2 me·L-1 높았다. P, Ca, Mg, S 농도는 수경재배보다 각각 약 0.76, 3.1, 0.8, 0.9me·L-1 높았으며, K와 Fe는 각각 약 0.8me·L-1, 0.5mg·L-1 낮았다. 딸기 잎의 무기이온 함량은 두 재배 처리 간 유의차가 없었으며 엽내 K 함량은 적정 범위를 보였 다. 정식 후 58과 98일 사이에 아쿠아포닉스에서 재배된 딸기의 T-N와 P 흡수율은 수경재배보다 각각 1.5, 1.9배 높 았고 K 흡수율은 유의차가 없었다. 개체당 과실수는 아쿠아포닉스에서 수경재배보다 유의하게 많았으며, 상품과 생체중, 건물중, 과실의 과장과 과폭은 수경재배에서 아쿠아포닉스보다 높았다. 결과를 종합하면, 아쿠아포닉스에 서는 수조액의 물고기 배설물과 먹이 잔여물에 의한 고체 입자의 비료성분을 지속적으로 가용하여 활용한다는 것 을 알 수 있다.

Background: Children with cerebral palsy face challenges in maintaining body stability because of structural and functional defects. Their ability for responsive balance control is diminished. While there exist various trunk stabilization exercises such as Kinetic Link training (KLT) and the Bird-dog posture, there is a notable dearth of research that applies KLT specifically to children with cerebral palsy. Objectives: To investigate the effects of KLT and Bird-dog exercise on gross motor function and balance in children with cerebral palsy. Design: Quaxi-experimental study. Methods: The study participants were randomly divided into two groups: 15 individuals in the KLT group and 15 in the Bird-dog group. General characteristics were examined, and initial measurements of Gross motor function measure (GMFM) and Pediatric balance scale (PBS) were taken prior to the intervention. Each group engaged in KLT exercises and Bird-dog exercises for 20 minutes, three times a week over an 8 week period. Following the completion of the 8 week intervention, secondary measurements of GMFM and PBS were conducted. Results: In the KLT group, both PBS and GMFM showed a significant increase after the intervention compared to before (P<.05). Similarly, in the Bird-dog group, both PBS and GMFM significantly increased after the intervention compared to before (P<.05). There was a significant difference observed in PBS when comparing the pre- and post-intervention changes between the two groups (P<.05), whereas no significant difference was found in GMFM between the groups when comparing the pre- and post-intervention changes (P>.05). Conclusion: The interventions involving KLT and Bird-dog exercises were observed to effectively enhance PBS and GMFM in children with cerebral palsy. Specifically, it was evident that KLT was more beneficial in improving balance abilities compared to Bird-dog exercise.

Background: Most non-pharmacological interventions for tension-type headache (TTH) focus on direct intervention in areas associated with headaches, with limited research exploring the indirect effects of interventions utilizing the fascia. Objectives: To investigate the effects of superficial back line (SBL) stretching and head-neck massage interventions on the range of motion (ROM) and neck disability index (NDI) of TTH. Design: Randomized controlled trial. Methods: The study participants were randomly allocated into three groups: SBL stretching group (n=9), head-neck massage group (n=9), and combined group (n=9). Prior to the intervention, measurements were taken for neck flexion ROM, straight leg raising test (SLRT) ROM, and NDI. The intervention consisted of 30-minute sessions conducted twice a week for 8 weeks. The second measurement took place 4 weeks after the intervention, followed by a third measurement conducted after an additional 4 weeks of intervention. Results: Comparing neck flexion ROM within each group, a significant increase was observed in the SBL stretching group after 8 weeks compared to before the intervention (P<.05). Regarding the comparison of SLRT ROM within each group, a significant increase was noted after 8 weeks compared to before the intervention in the SBL stretching, head-neck massage, and combined groups (P<.05). In terms of the comparison of NDI within each group, a significant decrease was observed in all three group after the intervention compared to before the intervention (P<.05). Conclusion: 8-week intervention involving SBL stretching, head-neck massage, and their combined application demonstrated effectiveness in improving neck flexion ROM, SLRT ROM, and the NDI for individuals with TTH.

Background: Chronic back pain not only causes physical discomfort and decreased functionality but also affects emotional well-being, resulting in feelings of anxiety, depression, and other psychological issues. Studies have indicated that cognitive functional therapy and motor control exercises can alleviate chronic low back pain and associated psychological issues. Objectives: To investigated the effect of chronic low back pain on the cognitive functional therapy (CFT) and motor control exercises (MCE). Design: Quaxi-experimental study. Methods: Forty patients with chronic low back pain were randomly assigned and divided into 20 cognitive functional therapy group with motor control exercises group (CFTMG) and 20 patients in motor control exercises group (MCEG). After applying CFT with motor control exercises and motor control exercises for 8 weeks, changes in numeric pain rating scale (NPRS), Oswestry disability index (ODI) and Fear-avoidance beliefs questionnaire (FABQ) were observed. Results: In the CFTMG, statistically significant changes were observed in NPRS, ODI, and FABQ before and after the intervention. In the MCEG, statistically significant changes were observed in VAS and ODI before and after the intervention. Conclusion: The application of CFTM and MCE in patients suffering from chronic low back pain has demonstrated effectiveness in alleviating pain, enhancing back function, and reducing kinesiophobia associated with the condition.

The root-lesion nematode Pratylenchus spp. is the most important plantparasitic nematode due to its worldwide distribution, wide host ranges, and migratory endoparasitic characteristics. One population of Pratylenchus collected from the giant pussy willow (Salix chaenomeloides Kimura) in the Andong area as part of a nematode survey in Korea was characterized morphologically and by molecular methods. The analysis of morphological measurements and morphometric characteristics, as well as DNA sequencing of the rRNA large subunit (LSU) D2/D3 expansion segments and the internal transcribed spacer (ITS) gene sequence, confirmed the identity of this population as P. hippeastri. This study is the first report of P. hippeastri associated with Salix chaenomeloides in Korea and worldwide. Further studies on distribution and pathogenicity in different P. hippeastri host crops, such as grapevines, strawberries, and apples, are necessary. The taxonomic keys to 16 Pratylenchus species in Korea are provided.

Background: The flexible flatfoot is characterized by a flattening of the foot arch due to excessive bodyweight. The use of shoe insoles or taping methods has been identified as effective in realigning the navicular or calcaneus bones and addressing supination in pronated feet. Objects: This study aimed to analyze the difference between the arch taping attachment method, introduced in a previous study, and a novel taping method designed to provide support to the inner aspect of the heel bone in cases of flexible flatfoot. Methods: A navicular drop test was performed to discriminate flexible flatfoot. To analyze the differences in pressure distribution during walking for each taping method, the subjects underwent testing in the barefoot state with no attachments. The procedure included a sequence of arch taping and heel taping. Subsequent analysis of pressure distribution during walking utilized the GaitRite® system (GAITRite Gold, CIR Systems Inc.). Results: Arch taping and calcaneus taping significantly reduced the integrated pressure over time and peak pressure on the medial side of the midfoot for both feet compared to the barefoot state. Conclusion: The findings of this study suggest that supporting the inside of the heel through calcaneus taping, without direct stimulation to the longitudinal arch and navicular bone, is an effective intervention for flexible flatfoot.

As a means to activate eco pastoral system in alpine grassland, the government can consider public pastures, which are currently unused, to scale them up into public ranches. Depending on ownership and operation, four management models proposed as follows: 1) Government-Owned and Operated with Balanced Profit and Loss 2) Government-Owned and Operated with Revenue Generation 3) Government-Owned but Privately Operated by Outsourced to Professional Manager 4) Full Privatization (Ownership and Operation by Private Individuals). The study outlined above proposes four management models for the activation of eco pastoral system in alpine grassland. It also suggests methods for the selection and performance evaluation of manager to establish a profitable structure. Additionally, the research provides management methods for the conservation of grazing ecology in pastoral ecosystems. Particularly, the adaptation of tools commonly used in South Korean business sector for the selection and performance evaluation of manager within the system of the proposed management models. This aspect is deemed valuable as it aligns these tools with the specific characteristics of eco pastoral system in alpine grassland, contributing not only to the effective implementation of the models but also to the enhancement of the revenue structure.

Revolutionary advancements, such as the reduction in DNA sequencing costs and genome editing, have transformed biotechnology, fostering progress in manipulating biomolecules, engineering cells, and computational biology. Agriculture and food production have significantly benefited from tools like high-throughput microarrays, accelerating the selection of desired traits. Genetic engineering, especially utilizing genome editing, facilitates precise alterations in plants and animals, harnessing microbiomes and fostering lab-grown meat production to alleviate environmental pressures. The emergence of new biotechnologies, notably genome editing, underscores the necessity for regulatory frameworks governing LM (living modified) organisms. Global regulations overseeing genetically engineered or genome-edited (GE) organisms, encompassing animals, exhibit considerable diversity. Nonetheless, prevailing international regulatory trends typically exclude genomeedited plants and animals, employing novel biotechnological techniques, from GMO/ LMO classification if they lack foreign genes and originate through natural mutations or traditional breeding programs. This comprehensive review scrutinizes ongoing risk and safety assessment cases, such as genome-edited beef cattle and fish in the USA and Japan. Furthermore, it investigates the limitations of existing regulations related to genome editing in Korea and evaluates newly proposed legislation, offering insights into the future trajectory of regulatory frameworks.

Background: Single nucleotide polymorphisms (SNPs) are widely used genetic markers with applications in human disease diagnostics, animal breeding, and evolutionary studies, but existing genotyping methods can be labor-intensive and costly. The aim of this study is to develop a simple and rapid method for identification of a single nucleotide change. Methods: A modified Polymerase Chain Reaction Amplification of Multiple Specific Alleles (PAMSA) and high resolution melt (HRM) analysis was performed to discriminate a bovine polymorphism in the NCAPG gene (rs109570900, 1326T > G). Results: The inclusion of tails in the primers enabled allele discrimination based on PCR product lengths, detected through agarose gel electrophoresis, successfully determining various genotypes, albeit with some time and labor intensity due to the use of relatively costly high-resolution agarose gels. Additionally, high-resolution melt (HRM) analysis with tailed primers effectively distinguished the GG genotype from the TT genotype in bovine muscle cell lines, offering a reliable way to distinguish SNP polymorphisms without the need for time-consuming AS-PCR. Conclusions: Our experiments demonstrated the importance of incorporating unique mismatched bases in the allele-specific primers to prevent cross-amplification by fragmented primers. This efficient and cost-effective method, as presented here, enables genotyping laboratories to analyze SNPs using standard real-time PCR.

Radioactive liquid waste generated during the operation of domestic nuclear power plants is treated through a somewhat different liquid radwaste system (LRS) for each plant. Prior to the introduction of standard nuclear power plants, LRS used a concentrated water dry system (CWDS) to evaporate liquid waste and manage it in the form of dry powder. The boron-containing radioactive liquid waste dry powder was solidified using paraffin from 1995 to 2010, and about 3,650 drums (based on 200 L) of paraffin solidified drums are currently stored in nuclear power plants. Paraffin solidification drums do not meet the acceptance criteria for radioactive waste repositories because it is difficult to secure the homogeneity of the solidified body and there are concerns about leaching of radioactive waste due to the low melting point of paraffin. In order to solve this problem and safely permanently dispose of paraffin solidification drums, the characteristics of dry powder paraffin solidification drums containing boron-containing radioactive liquid waste must be analyzed and appropriate treatment technology utilizing the results must be introduced. This study analyzes the physical properties of paraffin, the chemical properties of boron-containing radioactive waste dry powder, and the physicochemical properties of paraffin solidification powder, and proposes an appropriate alternative technology for treating boron-containing radioactive waste dry drum. When disposing of the paraffin solidification drum with boron-containing radioactive liquid waste dry powder, the solidification body must be effectively withdrawn from the drum and the paraffin must be completely separated from the solidification body. When disposing the drum, the solidified material must be effectively extracted from the drum and the paraffin must be completely separated from the solidified material. Afterwards, the paraffin must be self-disposed, and the radioactive waste must be disposed of in accordance with acceptance criteria of repository. We looked at how each characteristic of the paraffin solidification drum with boron-containing radioactive liquid waste dry powder can be utilized in each of the above treatment processes.

There is a large amount of radioactive waste in waste storage in the Korea Atomic Energy Research Institute. Some of the radioactive waste was generated during the dismantling process due to Korea Research Reactor 1&2 and it accounts for 20% of the total waste. Radioactive waste must be reduced by appropriate disposal methods to secure storage space and to reduce disposal costs. Research Reactor wastes include wastes that are below the acceptable criteria for selfdisposal and non-contaminated wastes, so they can be treated as wastes subject to self-disposal through contamination analysis and reclassification. In order to deregulation radioactive waste, it is necessary to meet the self-disposal standards stipulated in the Domestic Nuclear Act and the treatment standards of the Waste Management Act. The main factors of deregulation are surface contaminant, radionuclide activity and dose assessment. To confirm the contamination of waste, surface contaminant and gamma nuclide analysis were performed. After homogenizing the waste sample, it was placed in 1 L Mariinelli beaker. When collecting waste samples, 1 kg per 200 kg of waste was collected. The concentrations of the major radionuclides Co-60, Cs-134, Cs-137, Eu-152, and Eu-154 were analyzed using HPGe detector. To evaluate radiation dose, various computational programs were used. A dose assessment was performed with the analyzed nuclide concentration. The concentrations of representative nuclides satisfied the deregulation acceptance criteria and the results of the dose assessment corresponding to self-disposal method was also satisfied. Based on this results, KAERI submitted the report on waste self-disposal plan to obtain approval. After final approval, Research Reactor waste is to be incinerated and incineration ash is to be buried in the designated place. Some metallic waste has been recycled. In this study, the suitability of deregulation for self-disposal was confirmed through the evaluation of the surface contaminant analysis, radionuclide concentration analysis and dose assessment.

The HADES (High-level rAdiowaste Disposal Evaluation Simulator) was developed by the Nuclear Fuel Cycle & Nonproliferation (NFC) laboratory at Seoul National University (SNU), based on the MOOSE Framework developed by the Idaho National Laboratory (INL). As an application of the MOOSE Framework, the HADES incorporates not only basic MOOSE functions, such as multi-physics analysis using Finite Element Method (FEM) and various solvers, but also additional functions for estimating the performance assessment of Deep Geological Repositories (DGR). However, since the MOOSE Framework does not have complex mesh generation and data analyzing capabilities, the HADES has been developed to incorporate these missing functions. In this study, although the Gmsh, finite element mesh generation software, and Paraview, finite element analysis software, were used, other applications can be utilized as well. The objectives of HADES are as follows: (i) assessment of the performance of a Spent Nuclear Fuel (SNF) disposal system concerning Thermal-Hydraulic-Mechanical-Chemical (THMC) aspects; (ii) Evaluation of the integrity of the Engineered Barrier System (EBS) of both general and high-efficiency design perspective; (iii) Collaboration with other researchers to evaluate the disposal system using an open-source approach. To achieve these objectives, performance assessments of the various disposal systems and BMTs (BenchMark Test), conducted as part of the DECOVALEX projects, were studied regarding TH behavior. Additionally, integrity assessments of various DGR systems based on thermal criteria were carried out. According to the results, HADES showed very reasonable results, such as evolutions and distributions of temperature and degree of saturation, when compared to validated code such as TOUGH-FLAC, ROCMAS, and OGS (OpenGeoSys). The calculated data are within the range of estimated results from existed code. Furthermore, the first version of the code, which can estimate the TH behavior, has been prepared to share the contents using Git software, a free and open-source distribution system.

A comparison and validation between the analysis and vibration test data of a nuclear fuel assembly were conducted. During the comparison and validation process, various parameters that govern the vibration behavior of the fuel assembly were determined, including nuclear fuel rod’s stiffness, spring constants of the dimple and spring of support structures, and damping coefficients. The calibration of the vibration analysis model aimed to find analysis parameters that can accurately simulate the vibration behavior of the test data. For calibration, power spectral density (PSD) diagrams were generated for both the measured signals from the test and the calculated signals from the analysis. The correlation coefficient between these two PSD plots was calculated. To find the analysis parameters, each parameter was defined as a variable with an appropriate range. Latin hypercube sampling was used to generate multiple sample points in the variable space. Analysis was performed for the generated sample points, and PSD plot correlation coefficients were calculated. Using the generated sample points and their corresponding results, a Gaussian Process Regression model was implemented for PSD plot correlation coefficients and the maximum PSD value. Based on the constructed surrogate model, the optimal analysis parameters were easily found without additional computations. Through this method, it was confirmed that the analysis model using the optimal parametes appropriately simulates the vibration behavior of the test.

SMR, which has recently been in the spotlight, has several advantages. However, it poses additional challenges in the areas of new design, digitalization, security, safety and safeguards. Among them, security refers to measures to protect nuclear materials and facilities from unauthorized access, theft, or destruction. Safeguards refer to measures to prevent the spread of nuclear weapons. The relationship between security and safeguards is complex and constantly evolving. In general, security measures are designed to protect nuclear materials and facilities from physical attack, while safeguards are designed to track and monitor the movement of nuclear materials and prevent them from being used to create nuclear weapons. In some areas security and safeguards work in complementary ways, and in other areas they conflict. But ultimately, finding a balance is what is effective and efficient. In conclusion, although the security and safeguards of SMRs have different key objectives, they are closely related and must be implemented comprehensively and consistently to ensure the safety of nuclear facilities, the public, and the environment. In this paper, we investigate how the safety and safeguards of SMR are currently being researched and analyze what difficulties there are when assuming that they are operated as a single interface.

기후변화와 세계시장 개방에 따른 외래 및 돌발해충의 종류는 다양해지고 밀도는 지속적으로 증가하고 있지 만 발생 실태에 관한 자료는 미흡하다. 본 연구는 경남지역 돌발 및 남방계 해충의 발생과 피해조사를 위해 미국선 녀벌레, 썩덩나무노린재, 담배거세미나방 등 3종을 경남 18시·군에서 조사하였다. 미국선녀벌레는 약충기(6월), 성충기(9월) 조사를 진행하였고, 길이가 50cm 이상되는 가지의 밑동에서 위쪽으로 50cm 내 개체를 육안조사하 였다. 썩덩나무노린재는 콩 개화기(7월), 등숙기(9월) 조사를 진행하였고 지점당 집합페로몬 트랩 1개를 설치하 고 1주 후 채집된 마리 수를 조사하였다. 담배거세미나방은 성페로몬 트랩 1개를 설치한 뒤 1주 후 채집된 마리 수를 조사하였다. 미국선녀벌레는 의령, 함안, 함양 등에서 발생이 많았고, 전년대비 발생이 소폭 감소하였다. 썩덩나무노린재는 합천, 밀양, 함양 등에서 발생이 많았고, 담배거세미나방은 전시군에서 발생이 확인되었으 며, 특히 함양, 산청, 사천, 고성 등에서 밀도가 높았다.

최근 기후변화에 따라 아열대 작물 재배가 증가하면서 경남지역 망고 재배면적도 크게 증가하고 있다. 하지만 망고에 발생하는 병해충 발생 정보가 부족하여 2022년부터 현재까지 경남지역에 있는 망고농장을 조사하였으 며, 그 결과 병해 6종, 해충 8종 발생을 확인하였다. 특히 경남지역 망고 포장에서 꽃노랑총채벌레, 대만총채벌레, 볼록총채벌레 등의 발생을 확인하였고, 통영, 함안, 밀양 등에서 총채벌레류에 의한 피해가 발생하였다. 많은 농가에서 총채벌레류 방제를 위해 화학농약에 의존하고 있으나 총채벌레는 반복적인 약제 노출시 빠른 세대 진전으로 인해 저항성 발달이 쉽기때문에 방제에 어려움을 겪고 있다. 이러한 문제를 해결하고자 색상별 끈끈이 트랩의 총채벌레류 유인효과를 확인하였으며, 꽃노랑총채벌레는 노랑, 주황, 연두, 대만총채벌레는 빨강, 노랑, 파랑, 볼록총채벌레는 파랑, 노랑, 빨강 순으로 유인효과가 높은 것을 확인하였다.

양봉꿀벌은 한 마리 여왕벌을 중심으로 일벌 및 수벌들이 군집을 이루고 있는 사회성 곤충이다. 꿀벌은 여왕벌 이 깨어나면 처녀비행 (반경 2.4~7.4km )을 하여 공중에서 여러 마리의 수벌들과 교미를 한 후, 자신의 봉군 내부로 돌아와 평생을 살아가는 생태적 특성을 가지고 있다. 이와 같은 이유로 계통 증식 또는 품종 육종에서 외부의 오염원을 차단하기 위해서는 여왕벌과 수벌이 격리된 지역에서 교미가 이루어져야 한다. 본 연구는 여왕벌과 수벌이 격리될 수 있는 국내 도서지역을 중심으로 격리교미 연구를 2020년부터 2023년 봄부터 가을까지 수행하 였으며, 육종을 위한 격리교미의 효율성을 분석하고자 하였다. 도서지역은 전남 - 낙월도, 전북 - 위도, 왕등도, 식도에서 수행되었으며, 섬 크기, 경관 환경 요인, 교미 시기 등에 의해 격리교미의 성공률이 어떻게 변하는지를 확인하였다.