With South Korea increasingly focusing on nuclear energy, the management of spent nuclear fuel has attracted considerable attention in South Korea. This study established a novel procedure for selecting safety-relevant radionuclides for long-term safety assessments of a deep geological repository in South Korea. Statistical evaluations were performed to identify the design basis reference spent nuclear fuels and evaluate the source term for up to one million years. Safety-relevant radionuclides were determined based on the half-life criteria, the projected activities for the design basis reference spent nuclear fuel, and the annual limit of ingestion set by the Nuclear Safety and Security Commission Notification No. 2019-10 without considering their chemical and hydrogeological properties. The proposed process was used to select 56 radionuclides, comprising 27 fission and activation products and 29 actinide nuclides. This study explains first the determination of the design basis reference spent nuclear fuels, followed by a comprehensive discussion on the selection criteria and methodology for safety-relevant radionuclides.

The nuclear fuel that melted during the Fukushima nuclear accident in 2011 is still being cooled by water. In this process, contaminated water containing radioactive substances such as cesium and strontium is generated. The total amount of radioactive pollutants released by the natural environment due to the nuclear accident in Fukushima in 2011 is estimated to be 900 PBq, of which 10 to 37 PBq for cesium. Radioactive cesium (137Cs) is a potassium analog that exists in the water in the form of cations with similar daytime behavior and a small hydration radius and is recognized as a radioactive nuclide that has the greatest impact on the environment due to its long half-life (about 30 years), high solubility and diffusion coefficient, and gamma-ray emission. In this study, alginate beads were designed using Prussian blue, known as a material that selectively adsorbs cesium for removal and detection of cesium. To confirm the adsorption performance of the produced Prussian blue, immersion experiments were conducted using Cs standard solution, and MCNP simulations were performed by modeling 1L reservoir to conduct experiments using radioactive Cs in the future. An adsorption experiment was conducted with water containing standard cesium solution using alginate beads impregnated with Prussian blue. The adsorption experiment tested how much cesium of the same concentration was adsorbed over time. As a result, it was found that Prussian blue beads removed about 80% of cesium within 10-15 minutes. In addition, MCNP simulation was performed using a 1 L reservoir and a 3inch NaI detector to optimize the amount of Prussian blue. The results of comparing the efficiency according to the Prussian volume was shown. It showed that our designed system holds great promise for the cleanup and detection of radioactive cesium contaminated seawater around nuclear plants and/or after nuclear accidents. Thus, this work is expected to provide insights into the fundamental MCNP simulation based optimization of Prussian blue for cesium removal and this work based MCNP simulation will pave the way for various practical applications.

Spent nuclear fuel management is a high-priority issue in South Korea, and addressing it is crucial for the country’s long-term energy sustainability. The KORAD (Korea Radioactive Waste Agency) is leading a comprehensive, long-term project to develop a safe and effective deep geological repository for spent nuclear fuel disposal. Within this framework, we have three primary objectives in this work. First, we conducted statistical analysis to assess the inventory of spent nuclear fuel in South Korea as of 2021. We also projected future generation rates of spent nuclear fuels to identify what we refer to as reference spent nuclear fuels. These reference spent nuclear fuels will be used as the design basis spent fuels for evaluating the safety of the repository. Specifically, we identified four types of design basis reference spent nuclear fuels: high and low burnup from PLUS7 (with a 16×16 array) and ACE7 (with a 17×17 array) assemblies. Second, we analyzed radioactive nuclides’ inventory, activities, and decay heats, extending up to a million years after reactor discharge for these reference spent nuclear fuels. This analysis was performed using SCALE/TRITON to generate the burnup libraries and SCALE/ORIGEN for source term evaluation. Third, to assess the safety resulted from potential radioactive nuclides’ release from the disposal canister in future work, we selected safety-related radionuclides based on the ALI (Annual Limit of Intake) specified in Annex 3 of the 2019-10 notification by the NSSC (Nuclear Safety and Security Commission). Conservative assumptions were made regarding annual water intake by humans, canister design lifetime, and aquifer flow rates. A safety margin of 10-3 of the ALI was applied. We selected 56 radionuclides that exceed the intake limits and have half-lives longer than one year as the safety-related radionuclides. However, it is crucial to note that our selection criteria focused on ALI and half-lives. It did not include other essential factors such as solubility limits, distribution coefficients, and leakage processes. So, some of these nuclides can be removed in a specific analysis area depending on their properties.

The purpose of this paper was to investigate the comparison of balance and muscle strength between dominant and non-dominant legs in adults. Thirty adults in their 20s participated in this study. The dominant and non-dominant legs were selected based on the dominant hands of the target. The subject's muscle strength of legs was measured with Nicholas MMT, and the balance was measured with BIO-Rescue. We compared the dominant and non-dominant legs based on the results. The result, indicated no statistical difference on balance and muscle strength between dominant and non-dominant legs(p>.05). The results of this study will be helpful in setting the effective treatment direction and treatment level, and in controlling posture, balance and motor function.

The aim of this study was to investigate the effects of foot position adjuster on body alignment and weight loads in chronic stroke patients. The subjects were 15 chronic stroke patients who were admitted to KHospital in Daegu, South Korea. The study compared the body alignment and weight load changes on flat ground with the foot position adjuster using Foot scan and Dartfish video analysis software. In the results of this study, posterior superior iliac spine (PSIS) alignment decreased significantly after use of the foot position adjuster and center pressure was significantly increased after use of the foot position adjuster. This study suggests that foot position adjuster influences body alignment and weight distribution.

The purpose of this study was to analyze lower limb muscle activity and 3D motion analysis according to change foot arch height during walking. We selected 9 young and healthy people who have been normal foot. And we selected 7 young and healthy people who have been flatfoot. So, people were divided into 2 groups and walked platform during 2 minutes twice for checked by 3D motion analysis. These data were characterized by EMG measurements of three muscles( tibialis anterior, medial and lateral gastrocnemius) while they were walking. The collected data were analyzed by Independent t test using the SPSS statistics program(Ver 12.0). In foot arch change, there were no significant difference in three muscles 3D motion analysis also found that there were no significant difference in joint angles. In this study was to analyze lower limb muscle activity and 3D motion analysis according to change foot arch, but there were no significant difference in 6 muscles neither joint angles.

The techniques of IVM, IVF and IVC of canine oocytes may provide useful information for gamete salvage programs and the conservation of endangered canidae. This investigation has been made to determine the efficiency of in vitro maturation (IVM) as a basic experiment to study the development of canine oocytes after in vitro fertilization (IVF). The rate of oocytes developing to the MII stage was higher in the hormone treated group (10 IU/ml hCG+eCG, 14.7%, p<0.05) than in the control group (0 IU/ml hCG+eCG, 10.0%). The monospermy and pronuclear rates of canine oocytes were investigated after caffeine treatment on IVF. Canine oocytes were fertilized in the Fert‐TALP medium supplemented with 0, 10, 20 or 30 mM caffeine (Fert I, Fert II, Fert III or Fert IV, respectively). The highest pronuclear formation rate was obtained in the Fert I for 24 h IVF (6.7%, 6/89). Therefore, it is believed that unlike in other mammals, caffeine in canine IVF does not increase the efficiency of fertilization rate, and is not an important factor.

This study was carried out to investigate the optimum composition of sex pheromone of the rice green caterpillar Naranga aenescens and its efficacy was examined in a paddy field. The mating rate of N. aenescens tended to be increased with age, showing the highest rate of mating at age 2. The highest mating showed within 1 h after the scotophase, and also mating took place even during the photophase. A GC-EAD analysis of virgin female extracts showed two EAG-active components. Their chromatographic behavior was coincident with that of an authentic sample of Z9-14:Ac and Z11-16:Ac, respectively. The mass spectrum of two EAG-active components was almost identical to that of the authentic samples. The EAG response to two compounds, Z9-14:Ac and Z11-16:Ac, was significantly dose-dependent, but response to Z9-16:Ac was not dose-dependent. A 2: 1: 4 mixture of Z9-14:Ac, Z9-16:Ac, and Z11-16:Ac was the most effective composition for attracting N. aenescens. The male moths increased in proportion to the pheromone amount impregnated. The sticky-typed wing trap baited with sex pheromone captured significantly more males than the other two type of trap examined. Trap catches within a paddy field were much more than those in perimeter trap. The trap-baited with sex pheromone gave three or four distinct fluctuation peaks of male catches throughout the flight seasons.