The inorganic scintillator used in gamma spectroscopy must have good efficiency in converting the kinetic energy of charged particles into light as well as high light output and high light detection efficiency. Accordingly, various studies have been conducted to enhance the net-efficiency. One way to improve the light yield has been studied by coating scintillators with various nanoparticles, so that the scintillation light can undergo resonance on surface between scintillators and nanoparticles resulting in higher light yield. In this study, an inorganic scintillator coated with CsPbBr3 perovskite nanocrystals using dip coating technique was proposed to improve scintillation light yield. The experiment was carried out by measuring scintillation light output, as the result of interaction between inorganic scintillator coated with CsPbBr3 perovskite nanocrystals and gamma-ray emitted from Cs-137 gamma source. The experimental results show that the channel corresponding to 662 keV full energy peak in the Cs-137 spectrum shifted to the right by 14.37%. Further study will be conducted to investigate the detailed relationships between the scintillation light yield and the characteristics of coated perovskite nanoparticles, such as diameter of nanoparticles, coated area ratio and width of coated region.

Radioactive waste is typically disposed of using standard 200 and 320 L drums based on acceptance criteria. However, there have been no cases evaluating the disposal and suitability of 200 L steel drums for RI waste disposal. There has been a lack of prior assessments regarding the disposal and suitability of 200 L steel drums for the disposal of RI waste. Radioactive waste is transported to disposal facilities after disposal in containers, where the drums are loaded and temporarily stored. Subsequently, after repackaging the disposal drums, the repackaged drums are transported to disposal facilities by vehicle or ship for permanent disposal. Disposal containers can be susceptible to damage due to impacts during transportation, handling, and loading, leading to potential damage to the radiation primer coating during loading. Additionally, disposal containers may be subject to damage from electrochemical corrosion, necessitating the enhancement of corrosion resistance. Metal composite coatings can be employed to enhance both abrasion resistance and corrosion resistance. The application of metal composite coatings to disposal containers can improve the durability and radiation shielding performance of radioactive waste disposal containers. The thickness of radioactive waste disposal containers is determined through radioactive shielding analysis during the design process. The designed disposal containers undergo structural analysis, considering loading conditions based on the disposal environment. This paper focuses on evaluating the structural improvements achieved through the implementation of metal composite coatings with the goal of enhancing corrosion and abrasion resistance.

The operation time of a disposal repository is generally more than one hundred years except for the institutional control phase. The structural integrity of a repository can be regarded as one of the most important research issues from the perspective of a long-term performance assessment, which is closely related to the public acceptance with regard to the nuclear safety. The objective of this study is to suggest the methodology for quantitative evaluation of structural integrity in a nuclear waste repository based on the adaptive artificial intelligence (AI), fractal theory, and acoustic emission (AE) monitoring. Here, adaptive AI means that the advanced AI model trained additionally based on the expert’s decision, engineering & field scale tests, numerical studies etc. in addition to the lab. test. In the process of a methodology development, AE source location, wave attenuation, the maximum AE energy and crack type classification were subsequently studied from the various lab. tests and Mazars damage model. The developed methodology for structural integrity was also applied to engineering scale concrete block (1.3 m × 1.3 m × 1.3 m) by artificial crack generation using a plate jacking method (up to 30 MPa) in KURT (KAERI Underground Research Tunnel). The concrete recipe used in engineering scale test was same as that of Gyeongju low & intermediate level waste repository. From this study, the reliability for AE crack source location, crack type classification, and damage assessment increased and all the processes for the technology development were verified from the Korea Testing Laboratory (KTL) in 2022.

This study investigated the effectiveness of various chlorinating agents in partitioning light water reactor spent fuel, with the aim of optimizing the chlorination process. Through thermodynamic equilibrium calculations, the effects of using MgCl2, NH4Cl, and Cl2 as a single chlorinating agent or applying MgCl2, NH4Cl, and Cl2 sequentially for spent fuel chlorination were evaluated Furthermore, in this study, assuming the actual process operation situation, where only a part of the semi-volatile nuclides is removed during the heat treatment process, and including the process of precipitating the molten salt from the chlorination process with K3PO4 and K2CO3 precipitants, the percentage distribution of 50 nuclides in the light water reactor spent fuel into each process stream was quantitatively calculated using the simulation function of the HSC program and tabulated for intuitive viewing. Compared to a single chlorinator, sequential chlorination more effectively separated the heat and radioactivity of the spent fuel from the uranium-dominated product solids. Specifically, the sequential application of the chlorinating agents following heat treatment led to a final solid separation characterized by 93.1% mass retention, 5.1% radioactivity, and 15.4% decay heat, relative to the original spent fuel. The findings underscore that sequential chlorination can be an effective method for spent fuel partitioning, either as a standalone approach or in combination with other partitioning processes such as pyroprocessing.

Korea has an agreement for cooperation with 31 countries, including the United States, Canada, Australia, and Japan. Under the agreement, the obligated items must be used for peaceful purposes, comply with nuclear non-proliferation and international safeguards, and obtain prior consent of shipment in case of enrichment, reprocessing, retransfer. Among them, the United States, Canada, and Australia have signed Administrative Arrangements of Cooperation Agreements (Supplementary Arrangements in Canada) for the international transfer and annual reports of obligated items. When operators submit an annual report, the government compiles and make the annual report based on the data. Ideally, the final report is submitted by the operator should be the national annual report, but in practice, discrepancies occur between sum of the operator’s and goverment’s. In order to resolve these problems and strengthen the linkage between exports contrpol and safeguards, our institute has begun the project to develop an ‘Obligation Tracking System for internationally controlled items (OTS)’. It is believed that obligated items which are unnecessarily included or omitted in annual report could be managed properly by developing OTS for life cycle of the items such as import, disposal/ termination or transfer to other countries. In case of nuclear material, especially, the characteristics of the facilities (e.g., bulk-handling facilities) must be considered and principles of fungibility, equivalence, and proportionality should be applied to materials. In order to computerize these procedures, we would like to propose to adopt the format of Code 10 for obligated item management. Code 10 is the form of the annex to the Korea-IAEA safeguards agreement which includes all records of inventory changes, import/export, and domestic movement of nuclear materials. It is expected to minimize discrepancies between operators’ annual reporting data and national annual reporting and further contribute to enhancing national trust and nuclear transparency.

유기농업자재 제조 원료가 되는 주요 식물인 제충국, 고삼, 데리스, 님 등은 대부분 수입에 의존하고 있는 실정 으로 제품수급, 효용성 및 안전성 등에 빈번한 문제가 발생되고 있다. 이러한 문제점을 해결하기 위하여 국내 자생식물을 추출물 원료로 이용하기 위한 연구를 수행하고 있다. 이중 마트린이 함유되어 살충제로 이용되고 있는 고삼에 흰가루병, 총채벌레, 줄붉은들명나방, 담배거세미나방, 거품벌레류가 발생하여 피해를 주었다. 특 히 줄붉은들명나방(Uresiphita prunipennis)은 7월 하순부터 9월 중순까지 발생하여 엽육을 갉아먹고 엽맥만 남기는 피해를 주었고, 피해주율은 11% 였다. 이를 방제하기 위해 18종의 유기농업자재의 살충효과를 조사한 결과 주성분이 마늘추출물 80%, 데리스추출물 70% 등인 자재 6종이 80% 이상의 살충률을 나타내었다.

Fall armyworm Spodoptera frugiperda (Lepidoptera: Noctuidae) is a polyphagous agricultural pest that damages about 80 species of plants. It mainly damages Poaceae and plants used as food resources for humans. Its original habitat is the American continent, but it unintentionally settled in tropical and subtropical Asia, including Africa, India, and Sri Lanka. It occurs every year even in southern China, which is geographically adjacent to the Korean Peninsula, causing damage to crops. In Korea, it was first discovered on Jeju Island in June 2019 and is being discovered every year in Jeju and some inland areas. In 2023, there were a total of 13 discoveries, including those in the Jeju and Jeonbuk regions. Quarantine agency identified the maternal genotypes of all currently discovered individuals using COI and identified differences in genetic traits between individuals using the sex-related Z-chromosome. For comparison with the information on the individuals that invaded the country, 15 individuals from Guangxi and Guangdong provinces in China were collected and secured. Through the analysis of overseas samples, a database has been added to compare genetic information with domestic invasive species, and the reliability of the analysis is expected to increase.

Solenopsis invicta, known as the red imported fire ant, is an insect native to South America. This species was unintentionally introduced into Australia, New Zealand, several Asian countries, Caribbean countries, and the United States. It shows a high survival rate and settlement potential in human-habitable and non-living areas such as tropical rainforests, disturbed areas, deserts, grasslands, and roads. In Korea, invasions of red fire ants have been reported every year since 2017, and two invasions were discovered in 2023. Quarantine agency analyzing the haplotype and colony social type of S. invicta for surveillance and control. Population genetic analysis using Microsatellite Alleleic data of 66 loci to trace the origin of the invasion. Through research cooperation with the United States Department of Agriculture (USDA), we have received samples and expanded our genetic information database. This study analyzed genetic differences between 15 invasive populations and 44 reference groups. As a result of microsatellite analysis, the domestic invasive population showed a genetic structure similar to those in Guangzhou, China, and Florida, USA.

The fall armyworm (FAW), Spodoptera frugiperda, is an invasive pest species in Africa and Asia, which is native to the Western hemisphere. Invaded FAW was corn feeding strain. We study the developmental and biology of the corn strain FAW on the rice plants compare the result with corn feeding up to F2- generation. The development periods of F0, F1 and F2 generations of the rice-fed colony were 21.7%, 18.3% and 18.9% longer than corn-fed colony. The rice-fed colony was significantly lower in the body weight of larvae and pupae, and pre-adult survival rate and the fecundity than corn-fed colony. Our results showed that the corn strain FAW can survive and complete its life cycle by feeding rice plants up to several generations under laboratory condition, but their development and fecundity were reduced in comparison to the corn feeding colony. However, this study suggests potential impact of invaded FAW to the infestation of rice fields in Asian countries.

The striped fruit fly (SFF), Zeugodacus scutellata, is an agricultural pest species with a strong and rapid reproductive ability that can cause significant harm. To control the population of these kind of pests, the sterile insect technique (SIT) is being used as one of the effective methods. SIT involves the introduction of sexually transmitted factors that reduce the reproductive capacity of males. This study shows that knocking down the testis-specific serine/threonine protein kinase 1 (Zs-Tssk1) gene alters male fertility and male-initiated types of communication. Since Zs-Tssk1 influences the physiology of the testes, spermatogenesis is also affected, which in turn alters the lifespan of Zs-Tssk1 knock down group in comparison with the control. Based on these results, Zs-Tssk1 may be crucial in reproductive function, and its down-regulation may be helpful in controlling SFF through SIT.

This study examined the efficacy of various chlorinating agents in partitioning light water reactor spent fuel, with the aim of optimizing the chlorination process. Through thermodynamic equilibrium calculations, we assessed the outcomes of employing MgCl2, NH4Cl, and Cl2 as chlorinating agents. A comparison was drawn between using a single agent and a sequential approach involving all three agents (MgCl2, NH4Cl, and Cl2). Following heat treatment, the utilization of MgCl2 as the sole chlorinating agent resulted in a moderate separation. Specifically, this method yielded a solid separation with 96.9% mass retention, 31.7% radioactivity, and 44.2% decay heat, relative to the initial spent fuel. In contrast, the sequential application of the chlorinating agents following heat treatment led to a final solid separation characterized by 93.1% mass retention, 5.1% radioactivity, and 15.4% decay heat, relative to the original spent fuel. The findings underscore the potential effectiveness of a sequential chlorination strategy for partitioning spent fuel. This approach holds promise as a standalone technique or as a complementary process alongside other partitioning processes such as pyroprocessing. Overall, our findings contribute to the advancement of spent fuel management strategies.