본 연구는 근래에 건강 기능성효과가 널리 알려지면서 수요가 증가함에 따라 재배면적과 생산량이 증가하고 있는 종실용 들깨의 기계화재배를 촉진하기 위하여 수확 때 종자탈립에 의한 손실률은 최소화하고 수량성을 높일 수 있는 최적 파종시기를 설정하고자 수행하였다. 1. 파종기가 늦어질수록 파종후 개화기까지 생육일수는 짧아져 6월 15일 파종대비 6월 30일, 7월 15일 및 8월 1일 파종에서 각각 14일, 26일 및 31~32일 짧아졌으며, 또한 경장과 경태는 짧아지거나 가늘어졌으며 마디수가 적어지는 경향을 나타냈다. 2. 유효분지수는 6월 15일 파종대비 6월 30일, 7월 15일 및 8월 1일 파종에서 각각 82%, 61% 및 56%로 7월 15일 파종부터 급격히 낮아져 수량성 확보에 불리한 것으로 판단되었다. 그리고 최저화방군의 높이는 파종기가 늦어질수록 대체로 짧아지는데, 소담의 7월 15일과 8월 1일 점파구의 경우 15 cm 이하로 예취기를 이용한 기계수확에 불리하게 작용할 것으로 판단되었다. 3. 파종기와 수량성 간에는 고도의 유의성이 인정되었는데, 총수량은 6월 15일, 6월 30일 및 7월 15일 파종에서 통계적 유의차는 없었지만, 종실탈립률의 경우 7월 15일, 8월 1일 (30.3%) > 6월 15일(15.3%) > 6월 30일(13.5%) 파종의 순이었는데, 탈립된 종실을 제외한 순수량은 6월 30일 6월 15일 >7월 15일 >8월 1일 파종 순으로 높게 나타났으며 이러한 경향은 품종 및 파종방법에 관계없이 나타나는 일반적인 특징이었다. 4. 들깨 종실의 단백질 함유율은 파종기가 늦어질수록 대체로 증가하여 8월 1일 파종에서 가장 높았으며, 조지방 함유율의 경우 소담은 6월 15일과 7월 15일 파종에서, 들샘은 6월 30일과 7월 15일 파종에서 비교적 높았으며, 리놀렌산의 함량율은 8월 1일 파종에서 특이적으로 높은 수준을 나타냈다. 5. 위의 결과, 종실용 들깨의 예취기를 이용한 기계수확을 위한 최적 파종시기는 6월 30일 경으로 이때 파종하면 수확때 종실탈립에 의한 손실률은 최소화하면서 수량증대에 유리하여 기계수확에 가장 적합한 파종시기로 판단되었다.

In Korea, concrete pavements were first applied to highways in 1981 and as a result of continued increase in length over the past years, 2,592 km of concrete pavement network is currently in service, of which 1,399 km(54%) of concrete pavements is 10 years or older, and 233km(9%) is 20 years or older. The length of concrete pavement sections nationwide has been steadily on the rise every year (EXTRI, 2017). Approximately 54% of current concrete pavement highway network will reach the service life limit in 2025 which means around 660 billion won is needed for future pavement repair project (EXTRI, 2017). Given that concrete pavements beyond design life still have a remaining service life, it is economically advantageous to repair them before reconstruction. Asphalt overlays are a major repair method for older concrete pavements. Depending on the concrete pavement condition, thickness and mixture of asphalt overlays are determined. Service life of asphalt overlays varies by the presence, time and size of cracks in existing concrete pavements and reflecting crack at joints. Temperature change of concrete pavement is among the major reaction parameters of reflecting crack. Reflecting crack develops when asphalt bottom-up cracking by longitudinal shrinkage and expansion due to temperature change of the concrete base layer, top-down cracking by temperature difference between top and bottom of concrete, and shear stress by traffic loading are combined (Baek, 2010). Crack and joint behaviors of concrete pavement vary between the base layer and the concrete surface of composite pavement system, and different conductivity by mixture and thickness of asphalt overlay leads to temperature change of concrete base course. This study measured temperatures of each layer of diverse composite pavements in place on site and analyzed differences in temperature change of concrete base layer depending on mixture and thickness of asphalt overlays. Overlay thickness parameters were 5cm and 10cm, two values most widely used, while mixture parameters were SMA and porous asphalt. Based on temperature change of concrete surface, this study also evaluated the difference of temperature change in concrete base layer with an asphalt overlay on top. Findings from this study are expected to be utilized for studies on mechanism and modeling of reflecting crack in old concrete pavements with asphalt overlays.

Cytokines are known to function as regulatory molecules that can be produced by virtually every nucleated cell type in the body, including lymphocytes, monocytes/macrophages, epithelial cells, fibroblasts, and many others. Cytokines include lymphocyte-derived factors (lymphokines), monocyte-derived factors (monokines), hematopoietic factors (colony-stimulating factors), connective tissue/ growth factors, and chemotactic chemokines. Cytokines released in response to infection can affect tumor development in different ways. When exposed to infectious agents, cytokines are secreted by sentinel cells, such as macrophages and dendritic cells. These cytokines include interleukin 1 (IL-1) and tumor necrosis factor-α, as well as others, such as IL-6, IL-12, and IL-18. When released in sufficient quantities, these molecules can cause inflammation. Chronic inflammation is highly associated with tumor initiation, promotion, and progression. In this article, we review the roles and mechanisms of cytokines in tumor development.

Background : Cudrania tricuspidata Bureau is a widely used medicinal perennial woody plant. Obtaining information about the genetic diversity of plant populations is highly important for conservation and germplasm utilization. In this study, we developed single nucleotide polymorphism (SNP) markers derived from chloroplast genomic sequences to identify distinct Korean-specific ecotypes of C. tricuspidata via amplification refractory mutation system (ARMS)-PCR analyses. We performed molecular authentication of twelve C. tricuspidata ecotypes from different regions using DNA sequences in the chloroplast TrnL-F intergenic region. Methods and Results : SNPs were identified based on the results of nucleotide sequence for the intergenic region of TrnL-TrnF gene (chloroplast). Molecular markers were designed for those SNPs with additional mutations on the second base from SNPs for amplification refractory mutation system-polymerase chain reaction (ARMS-PCR). HRM pattern analyses were performed using the Mx3005P QPCR System (Agilent Technologies, CA, USA). Conclusion : We collected 12 individual lines of C. tricuspidata from various region in South Korea and China. Based on the nucleotide sequence in the trnL-trnF intergenic region of these lines, six SNPs and a deletion of 12 bps were identified and 12 individual lines were able to be grouped in one Korean ecotype and two different ecotypes of chinese lines, chinese line 1 and 2. The SNP markers developed in this study are useful for rapidly identifying these specific C. tricuspidata ecotypes collected from different regions.

Background : This study was performed to investigate the morphological and growth characteristics of tetraploid Polygonum multiflorum L. with colchicine treatment, and to clarify its effective induction and time for the increase of rhizome hypertrophy and effective components. Methods and Results : The induction of tetraploid P. multiflorum were done with colchicine treatment of 0.1, 0.5, and 1.0% conc. and the time was treated with 12, 24, and 48 hrs, respectively. DMSO 1% is treated for the effective penetration of colchicine with constant-temperature oven at 24C. Leaf explant was added the HR-A solution stained with HR-B solution, and then determined whether DNA contents of the doubles or not. Seed stand rate showed lower tendency as higher treatment concentration and as delayed the treatment time. When treated in DMSO 1% with 48 hr, seed stand was so small rate with 2%, and treated in 0.5% with 12 hr, seed stand was recorded higher rate with 33%. When treated in 0.5% colchicine with 24 hr, chimera and tetraploid induction rates were highest and obtained 29 individual chimera and 5 individual tetraploid. On overground growing, mean stem diameter of tetraploid (11.3 ㎜) is two times thicker than that of diploid (6.4 ㎜), with the vigorous growth. leaf length and width of tetraploid was 9.1 and 6.2 ㎝, respectively, and that of diploid was 6.8, and 5.1 ㎝, respectively. Stem diameter of a scape was also more thicker tendency in tetraploid than in diploid, chlorophyll contents over 29% existed in tetraploid. Investigated result from stoma no. and size of leaf with 400 magnification, stoma no. of diploid (26 individual) was four times higher than that of tetraploid (7 individuals), the size of tetraploid (38 ㎛) is twice longer in size of diploid (18 ㎛) and stoma area are broaden in four times. Seed length of tetraploid (3 ㎜) is longer than that of diploid (22 ㎜); but, seed width of tetraploid (22 ㎜) is widen than that of diploid (14 ㎜) in seed size comparison. That is, seed length is bigger in 1.4 times and seed width is bigger in 1.6 times, and seed surface area is broaden in two times. Conclusion : From above results, overground growing of tetraploid P. multiflorum is fairly better than that of native P. multiflorum. In the future, this tetraploid variety will promote to register when recognize the excellence than native species after tested the disease tolerance, underground growing characteristics, and key index component.

Background : An important feature of the nutrient solution is that they affect not only the growth but also quality of crops by changing nutrient uptake, especially due to changes of EC in nutrient solution. This study was carried out to investigate effect of EC in nutrient solution on growth and ginsenoside of ginseng. Methods and Results : EC in nutrient solution was controlled with 0.68, 0.84, 1.23, 1.41 dS/m. The root weight of ginseng treated by low EC levels in nutrient solution was higher during the initial of growth. However, the higher EC levels, the more increased the change rate of root weight from the initial to the middle of growth. The highest amount of ginsenoside was changed by growth period. Although the total amount of ginsenoside in root is highest treated by EC 0.68 dS/m at 45 days after treatment. the total amount of ginsenoside in root is highest treated by EC 1.23 dS/m at 135 days after treatment. Conclusions : EC in nutrient solution should to be controlled depending on the stage of growth and the part of use, i.e. root and leaves, when ginseng is cultivated through nutri-culture.

Background : Boron (B) is an essential element required for the growth of plant. It has a narrow range of optimal concentration from minimum to maximum thresholds than other micro-elements. The study was carried out to investigate to the influence of B excess concentrations on physiological disorder of leaf, growth and mineral concentration of ginseng to obtain basic information for physiological disorder diagnose. Methods and Results : The ginseng cultivar ‘Gumpoong’ was cultivated by hydroponic system for 2 months. The toxicity symptoms which ginseng leaves were curved downwardly and induced to chlorosis after beginning to dry the edge appeared on leaves more than 30 ppm compared to the control(3 ppm). The growth of ginseng was more decreased with higher B concentration. Mn uptake was also decreased as B concentration increased. It was found that B excess hindered the growth of ginseng and was reversely related to Mn uptake. Conclusions : More than B 30 ppm can negatively affect growth and mineral uptake. Consequently, B excess can occur physiological disorder of ginseng.

Soybean is one of the important food crop around the world. Especially in East Asia, it is the main ingredient for traditional food like soy sauce and soy paste. The double cropping system including soybean following onion, Chinese cabbage, and potato is widely adopted in Southern region of Korea. In this system, sowing date of second crop (soybean) can be delayed depending on first crops’ growth period and weather condition. When planting date is delayed it is known that soybean yield is declined because of shorter vegetative growth period and earlier flowering induced by warm temperature and changes in photoperiod. The objective of this study was to determine soybean growth and yield responses as plant populations at late planting date. Field experiment was conducted at Department of Functional Crop, National Institute of Crop Science, RDA located in Miryang, Gyeongsangnam-Do for two years (‘13-’14) in upland field with mid-late maturity cultivar Daewon. A split-plot block design was used with three replications. Main plots were three sowing dates from June 20 to July 20 with 15 days intervals, and subplots were 4 levels of planting densities. Data of maturity (R8) was recorded, yield components and yield were examined after harvesting. Experimental data were analyzed by using PROC GLM, and DMRT were used for mean comparison. Optimum planting population for maximizing soybean yield in late planting which compared with standard population. In mid-June planting, higher planting density causes increased plant height and decreased diameter which lead to higher risk of lodging, however, reduced growth period due to late planting alleviated this problem. Therefore higher seeding rates can provide protection against low seedling emergence caused by late planting in this region.

The main objective of this research was to evaluate the effects of process variables which were forming ability, flow displacement, effective stress, effective strain, fluid vector and products defects on manufactured artificial lightweight aggregate made of both incinerated sewage sludge ash and clay by means of the numerical analysis of a rigid-plastic finite element method. CATIA (3D CAD program) was used for an extrusion metal mold design that was widely used in designing aircraft, automobile and metallic molds. A metal forming analysis program (ATES Co.) had a function of a rigid-plastic finite element method was used to analyze the program. The result of extrusion forming analysis indicated clearly that a shape retention of the manufactured artificial lightweight aggregate could be maintained by increasing the extrusion ratio (increasing compressive strength inside of extrusion die) and decreasing the die angle. The stress concentration of metal mold was increased by increasing an extrusion ratio, and it was higher in a junction of punch and materials, friction parts between a bottom of the punch and inside of a container, a place of die angle and a place of die of metal mold. Therefore, a heat treatment as well as a rounding treatment for stress distribution in the higher stress concentration regions were necessary to extend a lifetime of the metallic mold. A deformity of the products could have made from several factors which were a surface crack, a lack of the shape retention and a crack of inside of the products. Specially, the surface crack in the products was the most notably affected by the extrusion ratio.

A new graft cactus (Gymnocalycium mihanovichii) cultivar “Hongseong” was developed from a cross “IG9334” and “Hongil” of G. mihanovichii by in vitro grafting and line selection at National Horticultural Research Institute, Rural Development Administration