코로나 사태 이후 공연예술계는 ‘초지능화’와 ‘초연결성’의 특징으로 대표되는 메타버스에 주목 하기 시작했다. 직접 만나서 소통할 수 없는 비대면적 상황은 현실세계와 가상공간을 연결해 주는 메타버스 플랫폼 전시 공연 활성화에 큰 영향을 끼쳤다. 코로나 사태가 끝난 이후에도 공연예술계는 다양하고 실험적인 온-오프라인 공연의 형태로 해당 기술을 활용한 다양한 프로 젝트 전시들을 선보이고 있다. 이처럼 실감 콘텐츠와 가상현실을 접목한 VR, XR 기술들은 빠 르게 실감 콘텐츠와 전시공연분야에 접목되며 실험적이고 다양한 공연과 전시를 선보이고 있 다. 메타버스 플랫폼을 활용한 전시와 공연들이 관객들이 어떠한 방식으로 다가가고 있는지 실감 콘텐츠 공연사례들을 분석하고, 가상현실이 일상화되고 있는 요즘, 전시와 공연 예술 분 야의 변화의 방향을 살펴본다.

This study evaluated the risk of single and combined exposure to microplastics in zebrafish (Danio rerio) through biomarkers, such as survival rate, excretion rate, and histological alterations of organ systems. The experimental groups were the control (Cont.), single microplastics exposure group (MPs, 1.83%/fish total weight (g)), the copper group (Cu, 21.6 μg L-1), and a group with combined exposure to MPs and copper (MPs*Cu). The experiment was conducted with individual exposure (7 days) for MP excretion rate analysis and group exposure (14 days) for biomarker analysis. The daily excretion rate of MPs tended to decrease in a time-dependent manner. The copper concentration in the body was not significantly different between single and combined copper exposure. The degeneration of mucous cells in the skin, capillary dilation of the gill lamella, increased intestinal mucous, hepatocyte hypertrophy, and the degeneration of glomeruli and renal tubules were observed in all exposure groups. These histological alterations showed the highest tendency in the MPs*Cu group. In this study, the changes in biomarkers were attributed to the single effect of copper or the combined effect of copper and MPs rather than being solely influenced by MPs.

The occurrence of shear failure in a rock mass, resulting from the sliding of joint surfaces, is primarily influenced by the surface roughness and contact area of these joints. Furthermore, since joints serve as crucial conduits for the movement of water, oil, gas, and thermal energy, the aperture and geometric complexity of these joints have a significant impact on the hydraulic properties of the rock mass. This renders them critical factors in related industries. Therefore, to gain insights into the mechanical and hydraulic behavior of a rock mass, it is essential to identify the key morphological characteristics of the joints mentioned above. In this study, we quantified the morphological characteristics of tensile fractures in granitic rocks using X-ray CT imaging. To accomplish this, we prepared a cylindrical sample of Hwang-Deung granite and conducted splitting tests to artificially create tensile fractures that closely resemble rough joint surfaces. Subsequently, we obtained 2D sliced X-ray CT images of the fractured sample with a pixel resolution of approximately 0.06 mm. By analyzing the differences in CT numbers of the rock components (e.g., fractures, voids, and rock matrix), we isolated and reconstructed the geometric information of the tensile fracture in three dimensions. Finally, we derived morphological characteristics, including surface roughness, contact area, aperture, and fracture volume, from the reconstructed fracture.

Rock discontinuities in underground rock behave as weak planes and affect the safety of underground structures, such as high-level radioactive waste disposal and underground research facilities. In particular, rock discontinuities can be a main flow path of groundwater and induce large deformation caused by stress disturbance or earthquakes. Therefore, it is essential to investigate the characteristics of rock discontinuities considering in-situ conditions when constructing highlevel radioactive waste disposal, which needs to assure the long-term safety of the structure. We prepared Hwang-Deung granite rock block specimens, including a saw-cut rock surface, to perform multi-stage direct shear tests as a preliminary study. In the multi-stage direct shear tests, we can exclude possible errors induced by different specimens for obtaining a full failure envelope by using an identical specimen. We applied the initial normal stress of 3 MPa on the specimen and increased the normal stress to 5 and 10 MPa step by step after peak shear stress observation. We obtained the mechanical properties of saw-cut rock surfaces from the experiments, including friction coefficient and cohesion. Additionally, we investigated the effect of filling material between rock discontinuities, assuming the erosion and piping phenomenon in the buffer material of the engineering barrier system. When the filling material existed in the rock surfaces, the shear characteristics deteriorated, and the effect of bentonite was dominant on the shear behavior.

In our previous study, we developed a CFD thermal analysis model for a CANDU spent fuel dry storage silo. The purpose of this model is to reasonably predict the thermal behavior within the silo, particularly Peak Cladding Temperature (PCT), from a safety perspective. The model was developed via two steps, considering optimal thermal analysis and computational efficiency. In the first step, we simplified the complex geometry of the storage basket, which stored 2,220 fuel rods, by replacing it with an equivalent heat conductor with effective thermal conductivity. Detailed CFD analysis results were utilized during this step. In the second step, we derived a thermal analysis model that realistically considered the design and heat transfer mechanisms within the silo. We developed an uncertainty quantification method rooted in the widely adopted Best Estimate Plus Uncertainty (BEPU) method in the nuclear industry. The primary objective of this method is to derive the 95/95 tolerance limits of uncertainty for critical analysis outcomes. We initiated by assessing the uncertainty associated with the CFD input mesh and the physical model applied in thermal analysis. And then, we identified key parameters related to the heat transfer mechanism in the silo, such as thermal conductivity, surface emissivity, viscosity, etc., and determined their mean values and Probability Density Functions (PDFs). Using these derived parameters, we generated CFD inputs for uncertainty quantification, following the principles of the 3rd order Wilks’ formula. By calculating inputs, A database could be constructed based on the results. And this comprehensive database allowed us not only to quantify uncertainty, but also to evaluate the most conservative estimates and assess the influence of parameters. Through the aforementioned method, we quantified the uncertainty and evaluated the most conservative estimates for both PCT and MCT. Additionally, we conducted a quantitative evaluation of parameter influences on both. The entire process from input generation to data analysis took a relatively short period of time, approximately 5 days, which shows that the developed method is efficient. In conclusion, our developed method is effective and efficient tool for quantifying uncertainty and gaining insights into the behavior of silo temperatures under various conditions.

자생식물은 관상용, 약용, 식량자원으로 활용될 수 있는 잠재력을 지닌 고유 유전자원이다. 돌부추(Allium koreanum H.J. Choi & B.U. Oh)는 우리나라 해안 암반지대에 분포하는 자생식물 중 하나로, 기후변화와 서식지 감 소로 인해 보전 가치가 높은 식물이다. 이번 연구는 온도와 과산화수소가 돌부추의 발아에 미치는 영향을 조사하기 위해 수행되었다. 종자를 무처리(대조군) 또는 1% 과산화수소(H2O2)로 90분간 처리한 종자를 준비해 15, 20, 25°C 로 설정된 식물 생장 챔버에 배치하였다. 그 결과, 파종 23일 후 15°C에서 42%인 발아율이 20°C와 25°C에서 각각 18%와 0%인 발아율보다 2배 이상 높았으며, H2O2 처리 여부와 관계없이 15°C에서 발아율이 42%로 가장 높았다. H2O2 처리와 관계없이 최종 발아율 50%(T50)에 도달하는 일수는 20°C에서 가장 짧았지만, 일평균 발아율(MDG)은 15°C에서 가장 높았다. 따라서 1%의 H2O2 처리는 돌부추의 발아율에 큰 영향을 미치지 않았으며, 15°C의 온도가 돌부추의 발아율을 높이는 데 최적인 것으로 판단된다. 본 연구 결과는 돌부추의 발아를 위한 기초 연구 자료로 활 용될 수 있을 것으로 기대된다.

During the larval development process of insects, juvenile hormone (JH) is essential for regulating various aspects of larval life, including growth, reproduction, and behavior, throughout their larval stage. The larval stage of Spodoptera frugiperda, when it consumes plant-derived metabolites, develops into pupae, but these pupae are unable to molt successfully. In this way, plant-derived metabolites contain or produce inhibitors of juvenile hormone, thereby disrupting the development of insect larvae and making them vulnerable to harm. Therefore, in this study, we established an in vitro screening system using yeast cells transformed with the Met-SRC juvenile hormone receptor of S. frugiperda. Through this system, we were able to identify juvenile hormone disruptors from plant-derived metabolites and confirm their developmental inhibitory effects on the larvae of S. frugiperda.

기존에는 생산되는 키틴과 키토산의 대부분이 게, 새우등 갑각류 껍질에서 유래하였다. 하지만 어업에 의존하 는 기존 갑각류 비해 친환경적이며 품질 유지에 이점을 가지는 곤충으로부터 유래한 키틴이 최근 주목 받기 시작 하며 연구가 활발해지고 있다. 이에 키토산이 남조류의 응집을 통해 녹조 제거 효과를 가지며 기존에 녹조를 억제하기 위해 널리 사용되던 살조제들이 독성을 띠어 환경에 악영향을 미치는 문제를 해결할 수 있다는 연구를 참고하여 매미 탈피각으로부터 추출한 키토산을 녹조 방제에 활용해 보고자 하였다. 매미 탈피각으로부터 키토 산을 추출하고 대표적인 녹조 원인종인 Microcystis aeruginosa 배양 후 추출한 키토산을 처리하여 녹조의 응집 효과를 관찰하였다. 본 연구에서 새로운 키토산 추출 원으로서 매미 탈피각의 가능성을 제시하였으며 이를 녹조 방제에 활용함으로써 버려지는 자원인 매미 탈피각의 활용 방안을 제시하였다.

Buckwheat (Fagopyrum esculentum), which is a traditional Korean crop, has been known as a health food due to its rich nutrition. This study was conducted to evaluate the change in flavonoid content of flowers and seeds during post-flowering growth of Korean tartary buckwheat variety ‘Hwanggeummiso’, with the aim of providing basic data for the development of functional food and feed additive. Tartary buckwheat took 69 and 99 days from the sowing date to reach the flowering and maturity stages, respectively. As a result of examining the flavonoid components of each part of tartary buckwheat, chlorogenic acid, rutin, and isoquercitrin of flowers increased from the flowering period on 22 May (0 days after flowering) to 42 days after flowering, while quercetin increased until 21 days after flowering and then decreased thereafter. In seeds, chlorogenic acid, rutin, and isoquercitrin were most abundant at the time of seed-bearing on 14 days after flowering, and showed a decreasing tendency thereafter. On the other hand, quercetin showed a tendency to increase until 21 days after flowering and then decrease. Overall, the flavonoid content was higher in flowers than in seeds, with rutin being particularly prominent. Based on this, the possibility as food materials and feed additives was confirmed using buckwheat produced in Korea.

In this study, a smart bench was developed and researched smart benches that can contribute to user convenience and satisfaction by installing them in parks, bus stops, and tourist attractions in line with the rapidly changing construction of smart cities. The smart bench is automatically operated by the control system according to the external temperature and provides additional functions such as charging, lighting, and advertising to improve general bench functions as well as heating in winter and cooling in summer, making it suitable for smart urbanization. The developed smart bench is designed to be strong enough to withstand loads of about 2,500 N. It minimizes the visible parts such as assembled bolts and 220V power supply wires, It can also give aesthetic effects. The development was carried out with the aim of waterproofing and dustproofing of IP44 grade in accordance with the climate of Republic of Korea, which has four seasons, and it is advantageous for long-term use because the paint was selected for the weather ability (discoloration) grade 3 or higher. If smart bench is commercialized, it is believed that various options can be provided to the smart bench market, where buyers had few product options, as the parts were developed in an assembled type so that all functions can be responded in an optional form according to the installation environment and the buyer's budget.

최근 미디어아트와 공연예술 분야에서 예술과 기술의 융합을 활용한 다원예술의 공연들이 늘어나고 있다. 공연 자와 관객들 사이의 실시간 커뮤니케이션이 이루어지는 공연예술은 관람객들이 전시의 형태로 이를 감상하는 미 디어아트와는 달리, 작가의 의도를 공연자의 퍼포먼스와 배경, 무대장치들을 통해 간접적으로 전달하는 형태를 취한다. 본 연구는 비언어적 커뮤니케이션의 형태로 관객들의 실시간 소통이 중요한 예술공연에서, 게임엔진과 실시간 인터렉션 기술들을 접목한 공연사례들을 분석해보자 한다. 게임과 영상 분야에서 주로 사용되었던 언리 얼 엔진과 비주얼 인터렉션 기술들은 실시간 리얼타임 비주얼 출력이라는 강력한 이점으로 인해 다양한 분야에 서 폭넓게 활용되고 있고, 예술공연 분야로도 점차 확대되고 있다. 따라서 미디어아트 공연분야에서 실시간 인터 렉션 기술이 접목된 다원예술 공연들을 살펴보고 어떠한 시도와 움직임들이 있는지 살펴보고 분석해보고자 한 다. 이를 통해 미디어아트 분야 뿐만 아니라, 공연예술 및 다원예술 분야에서도 미디어아트와 실시간 인터렉션 공연을 접목시킨 다양한 형태의 예술공연들이 늘어나고 관련 제작 및 방법론 연구에 도움이 되고자 한다.

Selenium (Se) is known as an antioxidant mineral and heme iron is a major source for iron intake which can promote carcinogenesis in the body. This study was to investigate the effect of Se on heme-aggravated colon carcinogenesis in mice. Three experimental groups included control [normal diet + AOM (10 mg/kg body weight in saline)/DSS (2% in the drinking water)], [AOM/DSS + hemin (534 mg/kg body weight in CMC)], and [AOM/DSS + hemin + Se (2.82 mg/kg diet in CMC)] groups. Colonic mucosa were stained with 0.3% methylene blue and the colonic polyps, aberrant crypt (AC) and aberrant crypt foci (ACF) were counted. Lipid peroxidation in liver was evaluated by the thiobarbituric acid-reactive substances (TBARS) assay. The number of polyps in the hemin + Se group was 31.6% lower than that in the control group, and 41.4% lower than that in the hemin group. The number of AC in the hemin + Se group was 42.8% lower than that in the control group, and 49.1% lower than that in the hemin group. The number of ACF in the hemin + Se group was 49.0% lower than that in the control group, 45.7% than that in the hemin group. Hepatic TBARS level in the hemin + Se group was significantly low compared with the control group or the hemin group (p<0.05). These findings suggest that Se treatment may be protective against colon carcinogenesis promoted by a high heme-containing diet.

본 연구는 신생아 검사 중 포수클로랄(chloral hydrate)을 투여 후 진행되는 신생아 진정 검사 대비 진정 대체 방식 중 하나인 피드 및 랩(feed and wrap) 방식의 유용성을 평가한 연구이다. 본 연구에선 진정으로 진행한 신생아의 두뇌 T2 축면 영상과 피드 및 랩 방식으로 진행한 같은 영상 각 30개의 운동 허상(motion artifact)과 백질과 회백질의 구분 정도를 두 명의 영상의학과 전문의가 정성적으로 평가하였고, 운동 허상을 측정하기 위해서 위상부호화(phase encoding) 방향의 배경 영역(background area)의 평균 신호 강도(mean signal intensity)를 구하여서 정량적 방식으로 평가하였다. 또한 총검사 시간을 정리한 뒤 정량적 방식으로 평가하였고 투약 기록의 여부와 간호일지를 토대로 피드 및 랩 방식의 총 39건의 검사 건수 대비 성공률을 측정하였다. 운동 허상의 정량적 평가와 영상 품질의 정성적 평가 모두에서 두 집단은 유의미한 차이가 없었으나, 검사 시간의 정량적 평가에선 p값이 0.001로 유의한 차이가 있었다. 피드 및 랩 방식의 총검사 건수 대비 성공률은 100%였다. 결론적으로 본 논문에선 피드 및 랩 방식과 진정 방식의 영상 품질이 유의한 차이가 없고 성공률이 높기에 유용하다고 판단하였으나, 검사 시간이 더 지연되는 한계가 있다는 사실을 확인하였다.

Porous carbons are considered promising for CO2 capture due to their high-pressure capture performance, high chemical/ thermal stability, and low humidity sensitivity. But, their low-pressure capture performance, selectivity toward CO2 over N2, and adsorption kinetics need further improvement for practical applications. Herein, we report a novel dual-templating strategy based on molten salts (LiBr/KBr) and hydrogen-bonded triazine molecules (melamine–cyanuric acid complex, MCA) to prepare high-performance porous carbon adsorbents for low-pressure CO2. The comprehensive investigations of pore structure, microstructure, and chemical structure, as well as their correlation with CO2 capture performance, reveal that the dual template plays the role of porogen for multi-hierarchical porous structure based on supermicro-/micro-/meso-/ macro-pores and reactant for high N/O insertion into the carbon framework. Furthermore, they exert a synergistic but independent effect on the carbonization procedure of glucose, avoiding the counter-balance between porous structure and hetero-atom insertion. This enables the preferred formation of pyrrolic N/carboxylic acid functional groups and supermicropores of ~ 0.8 nm, while retaining the micro-/meso-/macro-pores (> 1 nm) more than 60% of the total pore volume. As a result, the dual-templated porous carbon adsorbent (MG-Br-600) simultaneously achieves a high CO2 capture capacity of 3.95 mmol g− 1 at 850 Torr and 0 °C, a CO2/ N2 (15:85) selectivity factor of 31 at 0 °C, and a high intra-particle diffusivity of 0.23 mmol g− 1 min− 0.5 without performance degradation over repeated use. With the molecular scale structure tunability and the large-scale production capability, the dual-templating strategy will offer versatile tools for designing high-performance carbon-based adsorbents for CO2 capture.

According to IAEA PRIS, there is no record of dismantling commercial heavy water reactors among 57 heavy water reactors around the world. In Canada, which has the largest number of heavy water reactors, three of the 22 commercial heavy water reactors with more than 500 MW are permanently suspended, Gentilly unit 2 (2012), Pickering unit 2 (2007), and Pickering unit 3 (2008), all of which chose a delayed decommissioning strategy. On the other hand, Wolsong unit 1, which will be the world’s first heavy water reactor to be dismantled commercially, will be immediately carried out as a decommissioning strategy. KHNP has established various cooperation systems with advanced companies and international organizations related to overseas NPP decommission and is actively exchanging technologies. Among them, the most important focus is on research cooperation related to COG (CANDU owners Group). The first case is a joint study on Conceptual Calandria Segmentation. Four areas of process, waste management, ALARA, and cost for decommissioning reactors to be submitted to Canadian regulators for approval of Pickering and Gentilly-2’s preliminary decommissioning plan have been evaluated, and research on Wolsong unit 1 is currently underway. The second case is Decommissioning and long-term waste management R&D. Although the technical maturity is low, it studies the common interests of member companies in the decommissioning of heavy water reactor power generation companies and long-term waste management. Robotics for dismantling high-radiation structures, C- 14, H-3 measurement and removal methods, and concrete decontamination technology, which are characterized by heavy water, are being actively studied. KHNP is strengthening international cooperation with COG to prepare for the successful decommissioning of Wolsong unit 1. Based on previous studies by Pickering and Gentilly-2, an evaluation of the decommissioning of Wolsong unit 1 reactor is being conducted. In addition, it is preparing for decommissioning through experience analysis of the pressure tube replacement project.

KHNP is carrying out international technical cooperation and joint research projects to decommission Wolsong unit 1 reactor. Construction data of the reactor structures, experience data on the pressure tube replacement projects, and the operation history were reviewed, and the amount of dismantled waste was calculated and waste was classified through activation analysis. By reviewing COG (CANDU owners Group) technical cooperation and experience in refurbishment projects, KHNP’s unique Wolsong unit 1 reactor decommissioning process was established, and basic design of a number of decommissioning equipment was carried out. Based on this, a study is being conducted to estimate the worker dose of dismantling workers. In order to evaluate the dose of external exposure of dismantling workers, detailed preparation and dismantling processes and radiation field evaluation of activated structures are required. The preparation process can be divided into dismantlement of existing facilities that interfere with the reactor dismantling work and construction of various facilities for the dismantlement process. Through process details, the work time, manpower, and location required for each process will be calculated. Radiation field evaluation takes into account changes in the shape of structures by process and calculates millions of areas by process, so integrated scripts are developed and utilized to integrate input text data. If the radiation field evaluation confirms that the radiation risk of workers is high, mutual feedback will be exchanged so that the process can be improved, such as the installation of temporary shields. The results of this study will be used as basic data for the final decommissioning plan for Wolsong unit 1. By reasonably estimating the dose of workers through computer analysis, safety will be the top priority when decommissioning.