검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 5

        1.
        2015.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, Korea’s municipal wastewater treatment plants generated amount of wastewater sludge per day. However, ocean dumping of sewage sludge has been prohibited since 2012 by the London dumping convention and protocol and thus removal or treatment of wastewater sludge from field sites is an important issue on the ground site. The hydrothermal carbonization is one of attractive thermo-chemical method to upgrade sewage sludge to produce solid fuel with benefit method from the use of no chemical catalytic. Hydrothermal carbonization improved that the upgrading fuel properties and increased materials and energy recovery ,which is conducted at temperatures ranging from 200 to 350°C with a reaction time of 30 min. Hydrothermal carbonization increased the heating value though the increase of the carbon and fixed carbon content of solid fuel due to dehydration and decarboxylation reaction. Therefore, after the hydrothermal carbonization, the H/C and O/C ratios decreased because of the chemical conversion. Energy retention efficiency suggest that the optimum temperature of hydrothermal carbonization to produce more energy-rich solid fuel is approximately 200°C.
        4,000원
        2.
        2018.05 서비스 종료(열람 제한)
        가죽 제조 산업의 현황을 살펴보면 가공에 사용되는 원료피의 50%가 폐기물로 발생되어 진다. 가죽 원료에서 많은 부분이 폐기물로 발생하기 때문에 해당 공정의 폐기물 처리와 함께 자원으로서의 활용적 측면이 함께 고려되어야한다. 하지만 현재 대부분의 피혁폐기물은 주로 매립과 소각 방법으로 처리되고 있어 보다 지속가능하고 환경 친화적인 처리 방법이 요구되고 있는 실정이다. 본 연구에 사용된 피혁폐기물은 가죽 제조 공정 중 탈모공정(Liming) 후에 발생하는 Pelt scrap으로, 주성분이 지질과 단백질로 구성되어 있어 혐기성 소화를 통한 처리 시 효율적인 메탄 생성 기질로 사용될 수 있다. 다만, 피혁폐기물은 pH와 C/N 비가 높아 혐기성 소화 시 메탄 생성 과정에 저해를 줄 수 있어 이에 대한 조절이 필요하다. 일반적으로 피혁폐기물의 pH는 12 부근으로 알려져 있으며, 혐기성소화 공정에서 기질의 pH가 6이하 또는 8.5이상인 경우 메탄 생성에 영향을 줄 수 있다. 이에 효율적인 피혁폐기물 처리와 메탄가스 생산을 위해서는 기질의 pH 조절이 필요하다. 본 연구에서는 피혁폐기물의 높은 pH를 혐기성소화에 알맞은 중성으로 조절해주기 위해 pH가 낮으면서 생분해도가 높은 음폐수를 통합 기질로 사용해 혐기성소화를 실시하였다. 실험에 사용된 피혁폐기물과 음폐수의 pH는 각각 12.4와 4.2였으며, 이를 VS기준 0.13:0.87의 비율로 혼합하여 혼합기질의 pH를 7.7로 만들었다. 250mL serum bottle에 하수슬러지 100mL를 식종하고 기질 1g VS를 주입하였고 35℃, 150rpm으로 유지되는 항온교반기에서 진행하였다. 기질 pH 조절에 의한 소화 성능 확인을 위해 피혁폐기물과 음폐수 단독소화를 실시하고, 이를 pH 7로 조절한 통합소화 조건과 비교하였다. 이때 소화성능은 유기물 감량과 바이오가스 생산량 및 메탄함량을 통해 평가하였다. 실험 결과, 단독 소화와 비교해 기질의 pH를 조절해 통합소화에서 바이오가스 생산량과 메탄 함량이 증대되는 경향을 보였다. 결론적으로 혐기성소화 시 기질 혼합을 통한 중성 pH 조성은 바이오가스 생산량과 메탄 함량의 증가에 영향을 주는 것으로 판단된다.
        3.
        2018.05 서비스 종료(열람 제한)
        가죽제품 제조 산업으로부터 발생되는 피혁폐기물의 양은 투입되는 원료 가죽의 약 50%를 차지하는 것으로 알려져 있다. 그러나 이들 피혁폐기물은 적절한 처리 방법이 개발되지 않아 대부분 매립이나 소각을 통해 처리되고 있다. 특히, 매립이나 소각을 통한 처리는 단가가 높아 관련 산업의 경제성을 악화시키고 고형폐기물의 친환경적 처리 관점에서 문제점이 제기되고 있는 실정이다. 최근 화석연료를 대체하기 위한 신규에너지원의 중요성이 높아짐에 따라, 폐기물을 이용한 에너지화에 많은 연구가 진행되고 있으며, 피혁폐기물은 주로 단백질과 지질로 구성되어 있는 특성으로 인해 혐기성소화를 통한 바이오가스 생산이 가능한 것으로 알려져 있다. 그러나 일반적으로 알려져 있는 혐기성소화 공정의 최적 C/N 비 (20-30)를 고려할 때, 피혁폐기물의 높은 C/N비 (약 35)는 공정의 제한요소가 될 수 있다. 본 연구에서는 피혁폐기물과 음폐수를 통합하여 혐기성소화를 실시함으로써 기질의 C/N 비 조절이 혐기성소화 효율에 미치는 영향을 관찰하였다. 기질의 C/N 비 조절을 통한 혐기성소화 효율의 변화는 BMP (Biochemical methane potential) test를 약 40일간 진행하였으며, 바이오가스 발생량을 비교하였다. 실험은 경기도 동두천시에 위치한 가죽제품 제조업체로부터 수거된 pelt scrap과 양주시에 위치한 음식물쓰레기 자원화시설에서 발생되는 음폐수를 각각 채취하여 사용하였다. 개별 기질의 C/N 비는 피혁폐기물이 34.1, 음폐수가 13.5로 확인되었으며, 이들의 무게에 따른 혼합비를 조절하여 통합 혐기성소화 기질의 C/N 비를 20, 25, 30으로 맞춰 실험을 진행하였다. 실험결과 기질을 통합하여 C/N 비를 조절한 소화 조건에서 개별 기질의 단독소화 조건보다 많은 바이오가스 생산량이 관찰되었으며, C/N 비 20에서 바이오가스 생산량이 높은 것으로 나타났다. 이는 통합 기질의 C/N 비 조절효과와 함께 피혁폐기물에 비해 생분해도가 높은 음폐수 함량이 기질의 C/N 비가 낮을수록 더 많이 포함되었기 때문으로 판단된다.
        4.
        2015.05 서비스 종료(열람 제한)
        In this study, enhancement of phosphorus and nitrogen recovery efficiency from livestock manure through Magnesium Ammonium Phosphate (MAP) crystallization method has been suggested as an alternative to solve the problems of the existing phosphorus resource recovery method. It can become a useful fertilizer. This study focused on improvement of phosphorus resource recovery by changing energy density of ultrasonic dose for MAP crystallization. Solubilization rate (as phosphate/phosphorus) of phosphorus in livestock manure was measured by ultrasonic treatment. The energy density range of 100-50,000 of ultrasonic dose was determined. Optimal ultrasonic energy density was 1,000 dose as 64.5% of phosphate ratio. However, when the higher than 1,000 dose of ultrasonic energy density did not more improve phosphate solubilization ratio. Consequently, when use ultrasonic treatment at 1,000 dose of energy density, the phosphorus could recover approximately 65% from livestock manure by MAP crystallization. Moreover, this MAP becomes more valuable due to its nature as a slow-release fertilizer.
        5.
        2015.05 서비스 종료(열람 제한)
        The hydrothermal carbonization is one of attractive thermo-chemical method to upgrade biomass to produce biochar with benefit method from the use of no chemical catalytic. Hydrothermal carbonization improved that the upgrading and dewatering algal biomass, microalga as Chlorella vulgaris, which is conducted at temperatures ranging from 180 to 350℃ with a reaction time of 30 min. These characteristic changes in algal biomass were similar to those of coalification reactions due to dehydration and decarboxylation with increase of hydrothermal reaction temperature. The biochar became a solid fuel substance, the characteristics of which corresponded with fuel between lignite and sub-bituminous coal. The results of this study indicate that hydrothermal treatment can be used as an effective means to generate highly energy-efficient renewable fuel resources using algal biomass.