Various types of radioactive liquid and solid wastes are generated during the operation and decommissioning of nuclear power plants. To remove radionuclides Co-60, Cs-137 etc. from a liquid waste, the ion-exchange process based on organic resins has been commonly used for the operation of nuclear facilities. Due to the considerations for the final disposal of process endproduct, other treatment methods such as adsorption, precipitation using some inorganic materials have been suggested to prepare for large amounts of waste during decommissioning. This study evaluated sintering characteristics for radioactive precipitates generated during the liquid waste treatment process. The volume reduction efficiency and compressive strength of sintered pellets were the major parameters for the evaluation. Major components of a simulated precipitate were some coagulated (oxy) hydroxides containing light elements, such as Si, Al, Mg, Ca, and zeolite particles. Green pellets compressed to around 100 MPa were heated at a range of 750~850°C to synthesize sintered pellets. It was observed that the volume reduction percentages were higher than 50% in the appropriate sintering conditions. The volume reduction was caused by the reduction of void space between particles, which is an evidence of partial glassification and ceramization of the precipitates. This result can also be attributed to conversion reactions of zeolite particles into other minerals. The compressive strength ranged from 6 to 19 MPa. These results also showed a significant correlation with the volume reduction of sintered body. Although our lab-scale experiments showed many benefits of sintering for the precipitates, optimized conditions are needed for large-scale practical applications. Evaluation of sintering characteristics as a function of pellet size and further testing will be conducted in the future.

Various dry active wastes (DAWs) have been accumulated in nuclear power plants since the DAWs are mostly combustible. KAERI has developed a thermochemical treatment process for the used decontamination paper as an operational waste to substitute for incineration process and to decontaminate radionuclides from the DAWs. The thermochemical process is composed of thermal decomposition in a closed vessel, chlorination of carbonated DAWs, separation of soluble chlorides captured in water by hydroxide precipitation, and immobilization of the precipitate. This study examined the third and fourth steps in the process to immobilize Co-60 by fabricating a stable wasteform. Precipitation behaviors were investigated in the chloride solution by adding 10 M KOH. It was shown that the precipitates were composed of Mg(OH)2 and Al(OH)3. Then, the glass-ceramic wasteform for the precipitates were produced by adding additive mixtures in which silica and boron oxide were blended with various ratios. The wasteform was evaluated in terms of volume reduction ratio, bulk density, compressive strength, and leachability.

Radioactive waste generated in large quantities from NPP decommissioning has various physicochemical and radiological characteristics, and therefore treatment technologies suitable for those characteristics should be developed. Radioactively contaminated concrete waste is one of major decommissioning wastes. The disposal cost of radioactive concrete waste is considerable portion for the total budget of NPP decommissioning. In this study, we developed an integrated technology with thermomechanical and chemical methods for volume reduction of concrete waste and stabilization of secondary waste. The unit devices for the treatment process were also studied at bench-scale tests. The volume of radioactive concrete waste was effectively reduced by separating clean aggregate from the concrete. The separated aggregate satisfied the clearance criteria in the test using radionuclides. The treatment of secondary waste from the chemical separation step was optimally designed, and the stabilization method was found for the waste form to meet the final disposal criteria in the repository site. The final volume reduction rates of 56.4~75.4% were possible according to the application scenario of our processes under simulated conditions. The commercial-scale system designs for the thermomechanical and chemical processes were completed. Also, it was found that the disposal cost for the contaminated concrete waste at domestic NPP could be reduced by more than 20 billion won per each unit. Therefore, it is expected that the application of this technology will improve the utilization of the radioactive waste disposal space and significantly reduce the waste disposal cost.

Radioactive carbon, C-14, can be generated by the neutron capture reaction of O-17 during the nuclear power plant operation. Since C-14 is classified as an intermediate level waste radionuclide, it is required that an effective separation process for C-14. C-14 is mainly absorbed on activated carbon in the air cleanup system. Therefore, the main generation source of C-14 during the nuclear power plant decommissioning is spent activated carbon. KAERI has been developing the treatment of spent activated carbon. In this process, C-14 can be desorbed as a gaseous oxide form from the spent activated carbon at high-temperature vacuum conditions. This radioactive carbon dioxide can be captured into alkaline earth metal incorporated glass and can be transformed into carbonate form. However, the carbonate (e.g. CaCO3 and SrCO3) is dispersive. When the radioactive carbonates are disposed into a geological repository, they should be immobilized to remove future uncertainty. This study examined the stabilization/immobilization of the radioactive carbonates by the cement hydration process. Cement wasteform incorporated with calcium carbonate and strontium carbonate was produced under various waste loading (e.g. 20wt%, 40wt%, and 60wt% of CaCO3 and SrCO3, respectively). Then we evaluated mechanical and chemical durability by measuring compressive strength and leachability according to standard test methods specified in the waste acceptance criteria of the Gyeongju low and intermediate level waste repository (WAC-SIL-2022-1). Also, microstructure and thermal characteristics were investigated by SEM-EDS and TGA analysis.

A reference electrode is important for controlling electrochemical reactions. Evaluating properties such as the reduction potential of the elements is necessary to optimize the electrochemical processes in pyroprocessing, especially in a multicomponent environment. In molten chloride systems, which are widely used in pyroprocessing, a reference electrode is made by enclosing the silver wire and molten salt solution containing silver chloride into the membranes. However, owing to the high temperature of the molten salt, the choice of the membrane for the reference electrode is limited. In this study, three types of electroceramic, mullite, Pyrex, and quartz, were compared as reference electrode membranes. They are widely used in molten salt electrochemical processes. The potential measurements between the two reference electrode systems showed that the mullite membrane has potential deviations of approximately 50 mV or less at temperatures higher than 650℃, Pyrex at temperatures lower than 500℃, and quartz at temperatures higher than 800℃. Cyclic voltammograms with different membranes showed a significant potential shift when different membranes were utilized. This research demonstrated the uncertainties of potential measurement by a single membrane and the potential shift that occurs because of the use of different membranes.

본 연구에서는 우라늄 폐촉매 처리 공정에서 발생하는 우라늄 함유 폐기물 대상으로 유리-세라믹 매질 구조의 대형 디스크 소결체 형태로 제작 시, 최종 제작된 소결체의 비등방향 수축 특성 및 변형율 변화를 연구하였다. 본 연구에서는 최대 직경 40 cm를 갖는 다양한 크기 원형 디스크 형태와 원형 디스크의 1/4 크기의 부채꼴 형 소결체를 제작하여 이들의 비등방성 수축 특성을 평가하였다. 60 MPa 압력하에서 만들어지는 성형체는 소결 시 성형체의 크기 및 형태에 관계없이 높은 등방성 수축하였다. 제조된 전체 소결체에 대한 비등방성율은 평균 1.6%이었고 이때 평균 부피 감용율은 37.4% 이었다. 이러한 결과 로부터 국내에서 발생한 우라늄 폐촉매를 처리하기 위한 공정에서 발생하는 우라늄 함유 폐기물은 대형 디스크 형태의 유리-세라믹 매질 형태로 고형화함으로써 높은 안정성과 부피감용 효과를 가지며 200 L 드럼에 포장될 수 있음이 확인되었다.