농촌진흥청 국립원예특작과학원에서는 2021년 분홍색계 소 형 호접란 ‘Arihong’을 육성하였다. 2014년 밝은 분홍색 소형 품종 Phalaenopsis ‘Wedding’와 백색 바탕에 분홍빛을 가지는 소형종 P. ‘[{KT1398-1×(KM-6)-4}×Chiangbeauty-88]-23’ 를 모본과 부본으로 교배하였다. 2018년 실생 120개체 중 잎자세, 화색, 화형, 꽃대수 등 특성이 우수한 ‘14104-1’ 개체를 선발하여 기내 화경배양을 통해 증식하였다. 2018년부터 2021년에까지 1차, 2차특성검정을 통해 품종의 안정성과 균일성을 확인한 후 ‘Arihong’로 명명하였다. 이 품종은 백색(WG155B) 바탕에 중앙 에는 보라빛 분홍색(PVG80B)을 띄며, 진한 자주색(PG78A) 순판 을 가지는 것이 특징이다. 꽃대가 2대씩 발생하고 꽃대 길이는 평균 42.1cm 소형 분화로 적절한 크기를 가지고 있다. 평피기 형태의 꽃은 길이와 폭이 각각 5.1, 5.7cm이며, 분지가 발생하여 1개의 꽃대에 13.0개의 소화가 착생한다. ‘Arihong’의 잎은 수평으로 자라며 길이와 폭이 각각 13.0cm, 4.9cm였다. 또한 초세가 우수하고 생육 속도가 빨라 엽수 확보가 용이한 특성을 보였다.

Honeybees are pollinating agent of economic importance, and a model organism for microbiome analysis. The microbiota plays a great role in honeybee health and development as such needs to be fully elucidated among Apis mellifera in Korea. using 16S rRNA gene illumina sequencing, the gut microbiota of Apis mellifera at four developmental stages under natural condition shows dysbiosis of essential microbiota, especially between the 5-days larvae and workers.

During the decommissioning of a nuclear power plant, the structures must be dismantled to a disposal size. Thermal cutting methods are used to reduce metal structures to a disposal size. When metal is cut using thermal cutting methods, aerosols of 1 μm or less are generated. To protect workers from aerosols in the work environment during cutting, it is necessary to understand the characteristics of the aerosols generated during the cutting process. In this study, changes in aerosol characteristics in the working environment were observed during metal thermal cutting. The cutting was done using the plasma arc cutting method. To simulate the aerosols generated during metal cutting in the decommissioning of a nuclear power plant, a non-radioactive stainless steel plate with a thickness of 20 mm was cut. The cutting condition was set to plasma current: 80 A cutting speed: 100 mm/min. The aerosols generated during cutting were measured using a highresolution aerosol measurement device called HR-ELPI+ (Dekati®). The HR-ELPI+ is an instrument that can measure the range of aerodynamic diameter from 0.006 μm to 10 μm divided into 500 channels. Using the HR-ELPI+, the number concentration of aerosols generated during the cutting process was measured in real-time. We measured the aerosols generated during cutting at regular intervals from the beginning of cutting. The analyzed aerosol concentration increased almost 10 times, from 5.22×106 [1/cm3] at the start of cutting to 6.03×107 [1/cm3] at the end. To investigate the characteristics of the distribution, we calculated the Count Median Aerodynamic Diameter (CMAD), which showed that the overall diameter of the aerosol increased from 0.0848 μm at the start of cutting to 0.1247 μm at the end of the cutting. The calculation results were compared with the concentration by diameter over time. During the cutting process, particles with a diameter of 0.06 μm or smaller were continuously measured. In comparison, particles with a diameter of 0.2 μm or larger were found to increase in concentration after a certain time following the start of cutting. In addition, when the aerosol was measured after the cutting process had ended, particles with a diameter of 0.06 μm or less, which were measured during cutting, were hardly detected. These results show that the nucleation-sized aerosols are generated during the cutting process, which can explain the measurement of small particles at the beginning of cutting. In addition, it can be speculated that the generated aerosols undergo a process of growth by contact with the atmosphere. This study presents the results of real-time aerosol analysis during the plasma arc cutting of stainless steel. This study shows the generation of nucleation-sized particles at the beginning of the cutting process and the subsequent increase in the aerosol particle size over time at the worksite. The analysis results can characterize the size of aerosol particles that workers may inhale during the dismantling of nuclear power plants.

국립원예특작과학원에서 2016년 거베라 신품종 ‘샤이핑크 (Shy Pink)’를 육성하였다. ‘Shy Pink’는 2008년 10월부터 2008년 11월까지 녹색 화심의 분홍색 반겹꽃 ‘프리존’과 갈 색 화심의 살구색 반겹꽃 ‘아틸리아’를 교배하여 획득한 실생 72개체 중에서 2009년부터 2016년까지 생육 및 개화특성검 정을 거쳐 선발한 절화용 대륜 거베라 품종이다. ‘샤이핑크 (Shy Pink)’는 화형이 안정적인 갈색 화심의 연분홍색(RHS R49A) 반겹꽃 대륜계 품종이다. 꽃은 평균 직경이 12.4cm이 고, 내부설상화와 화반의 직경은 각각 7.2cm와 2.3cm이다. 외부설상화의 길이와 폭은 각각 6.0cm와 1.2cm로 꽃잎이 좁은 도란형이다. 꽃대 직경은 상부 6.1mm, 중부 7.0mm 정 도로 강건하며, 꽃대의 길이는 48.9cm이다. 절화수명은 12.1 일로 대조구인 ‘하모니(Harmony)’ 12.0일로 유사하였지만 절 화수명이 길며, 연간 채화량은 52.8본/주로 다수성 품종이다.

When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.

Large quantity of eggs fail to be fertilized and many of fertilized eggs are unable to hatch in the eel, Anguilla japonica. Larvae of eel absorb egg yolk up to 8 days after hatching but the majority of hatched larvae die before they reach the stage of first feeding in this species. Genes of key enzymes for yolk processing (cathepsin B, D, L and lipoprotein lipase - abbreviated as ctsb, ctsd, ctsl and lpl, respectively) could be associated with egg quality. In this study, we investigated differences in the expression of these genes between floating eggs and sinking eggs, and also the relationship between the gene expressions of the enzymes and fertilization rates in the fertilized eggs obtained from artificially matured female eels. Expressions of yolk processing enzyme genes did not show significant difference between floating and sinking egg groups. Expression of ctsb decreased when fertilization rate was high. Expression of ctsd, ctsl and lpl, however, did not show any significant differences. These results suggest that ctsb expression could be an indicator of egg quality, and that some proteins prone to be digested by ctsb could be very important in the process of fertilization and normal cleavage in this species. Further study should identify these critical proteins to improve our understanding on the quality of fish eggs.

Geneally, rice seeds regardless indica or japonica are showing low germination ratio or completely lost germination ability together with lost of good eating quality under high temperature and humidity conditions. Thus, this study was designed to evaluate a longevity for conservation of good eating quality during long term storage in rice. For the longevity evaluation, germination ability was studied after 5 days of high temperature and humidity stress (50℃/RH 95%). Dharial, originated from Bangladesh and showing weedy type with red pericarp, was selected as a good donor for longevity genes. A mutant was developed from Dharial through EMS mutagenesis and two populations of Dharial/4*Ilmibyeo and Dharial/4*Gopumbyeo were also developed for genetic study. In the 2-DE analysis followed by MALDI-TOF MS with wild and mutant lines, several candidate genes were identified. In the longevity test of two populations, a few lines showing good germination ability after high temperature and humidity stress were selected and subjected to confirm the relationships between longevity and conservation of good eating quality under long term storage.

Boseogchal is a newjaponica rice cultivar developed from the three-way cross ofHwayoung, Tamjin and Sinseonchalat Honam Agricultural Research Institute (HARI), RDA, in 2004. It is a waxy rice with about 117 days of growth duration fromtransplanting to har