달래의 전처리 방법을 통해 미생물 저감과 품질 유지 효과를 알아보기 위해 물리적인 처리로는 손 세척 1분, 버블 세척, Ultrasonication 처리를 50oC와 60oC의 온도에서 각각 1분, 3분, 5분 동안 세척하였고, 화학적 처리에서는 유기산인 푸마르산과 아세트산 용액 1.5%와 2% 농도에서 각각 1분, 3분, 5분 동안 침지 처리하였다. 미생물과 품질 분석 결과 물리적 처리에서는 버블 세척 3분이 곰팡이 저감에 효과적이었으나 일반세균 저감 효과는 적었고, Ultrasonication 60oC, 5분 처리에서 미생물 저감 효과가 가장 높았으나 색도의 a값이 증가하는 경향을 보여 녹색이 약해졌다. 화학적 처리에서는 acetic acid에 비해서 fumaric acid에서 일반세균과 곰팡이의 저감 효과가 높았으며, fumaric acid 1.5% 용액에서 3분 처리의 저감효과가 가장 높았다. 달래의 미생물 저감 효과가 좋은 버블세척 3분 (B3), fumaric acid 1.5%, 3분 처리(F153), 두 가지 방법을 조합한 병합(BF) 처리를 실시하고 9일 동안 4oC에서 저장하며 품질 특성을 비교해 본 결과, 일반세균보다는 곰팡이 저감에 더 효과적이었으며, 일반세균은 BF가 곰팡이는 F153에서 미생물 감소 효과가 있었다. 색변화에 있어 BF 처리의 ΔE값이 가장 낮았으며, 유기산 처리에서 색변화를 보여 F153에서 녹색이 약해졌다. 최대응집력 변화 알뿌리 보다는 녹색 줄기에서 현격히 나타났는데 저장 9일 차에 F153처리에서 녹색 줄기의 경도가 가장 높게 유지되었고 (P<0.05), 알뿌리 부분은 물리적 방법인 버블 세척 시 6일 차부터 다른 처리에 비해 낮아졌다(P<0.05). 달래의 미생물 저감과 품질의 유지를 고려할 때 전처리 방법으로는 fumaric acid 1.5%용액으로 3분 처리 시 미생물 저감 효과와 색·최대응집력의 특성 유지가 우수하였고, 3일 이내 의 유통기간이라면 병합 처리도 효과적인 방법으로 적용 할 수 있음을 알 수 있었다.

This study evaluated the effects of acidulant treatment on the quality and storage period of Topokkidduck. Two samples of Topokkidduck were prepared, one soaked in 10% acidulant (10SAT) and the other without soaking in the acidulant (NSAT). During the storage period, the two samples were tested for presence of microorganisms (aerobic bacteria, E.coli, and mold) and physicochemical properties (color value, texture profile analysis (TPA)). The 10SAT could be stored for 49 days without detection of E.coli and a mold level of 1.0 log CFU/g. NSAT could be stored for only 21 days. NSAT had an aerobic count of 2.27 log CFU/g as early as 7 days, and E.coli was detected at 21 days at a level of 4.15 log CFU/g. The presence of E.coli is not permitted according to the Ministry of Food and Drug Safety (MFDS). The hardness of the 10SAT increased during the storage period but to a much lesser extent compared to the NSAT. Thus the preparation of Topokkidduck by soaking in the acidulant controlled microbial growth for up to 49 days which is a much longer period compared to the control. Also, Topokkidduck soaked in the acidulant had a softer texture than the control during the storage period.

The purpose of this study is to optimize the rice starch and rice protein content ratio for the replacement of fish paste in eomuk using a response surface methodology. The experiment was designed based on the independent variables. The rice starch content (X1: 10, 20, 30%) and rice protein content (X2: 1, 3, 5%) were examined, along with the viscosity (Y1), color (Y2: L, Y3: a, Y4: b), and sensory evaluation of the dough (Y5: Color, Y6: Flavor, Y7: Off flavor, Y8: Taste, Y9: Hardness, Y10: Cohesiveness, Y11: Springiness, Y12: Chewiness, Y13: Overall acceptance), with the results being set as dependent variables. The p value of Y1, Y2, Y5, Y7, Y9, Y10, Y11, Y12, and Y13 showed a level of <0.05 excluding Y6 and Y8. R2 value was high at 0.80-0.95 so that these rice starch and rice protein contents were significantly affected in terms of the quality and sensory preference of eomuk; therefore, the optimal conditions of X1 and X2 were 19.99% and 2.91%, respectively. Under these optimal conditions, the predicted values of acceptance were Y5 (5.44), Y7 (5.36), Y9 (5.22), Y10 (5.46), and Y13 (6.11). These results will be the basis for building a method for obtaining a rice material. Also, they are expected to promote rice consumption through the development of processed foods using rice material.

The purpose of this study was to optimize the rice protein extracted using a response surface methodology. The experiment was designed based on a CCD (Central Composite Design), and the independent variables were the high pressure (X1, 0-400 MPa) and processing time (X2, 0-10 minutes). The results of the extraction content (Y1), residue content (Y2), and recovery yield (Y3) were fitted to a response surface methodology model (R2= 0.92, 0.92, and 0.93, respectively). Increasing the pressure and processing time has a positive effect on the extraction content (Y1), residue content (Y2), and recovery yield (Y3). Therefore, these high-pressure conditions (independent variables) can significantly affect the improvement in rice protein extraction efficiency. Thus, the optimal conditions of X1 and X2 were 400 MPa and 10 min., respectively. Under these optimal conditions, the predicted values of Y1, Y2, and Y3 were 62.93, 57.53 mg/g, and 91.76%, respectively.

The purpose of this study was to optimize the mandarin dry chip manufacturing using a response surface methodology. The experiment was designed based on a CCD (Central Composite Design), and the independent variables were the drying temperature (X1, 50-90oC), drying time (X2, 12-36 hours), and microwave pretreat time (X3, 0-4 minutes). The results of appearance (Y5), color (Y6), taste (Y8) and overall acceptance (Y10) were fitted to the response surface methodology model (R2=0.86, 0.88, 0.89, and 0.84, respectively). Increasing the drying temperature and microwave treatment time were negatively evaluated for consumer acceptance. On the other hand, a high value of consumer acceptance was evaluated when the drying time was more than 24 hr. Therefore, the optimal conditions of X1, X2, and X3 were 52.989oC, 24 hr, and 1 min, respectively. Under these optimal conditions, the predicted values of Y5, Y6, Y8, and Y10 were 5.066, 5.338, 5.063, and 5.339, respectively.

The purpose of this study was to develop a peach spread premix to increase the usability of peaches with low storage stability. We analyzed the effect of adding different ratio of peach powder (0, 5, 10, 15%) on the physicochemical and sensory quality characteristics of peach spread premix. The result showed that the pH of the spread premix significantly decreased with the addition of greater amounts of peach powder (p<0.05). The total titratable acidity (TTA) and sweetness of the peach spread premix were significantly increased as the amount of added peach powder increased (p<0.05). The redness (a-value) and yellowness (b-value) increased with an increase of the peach powder ratio; however, the lightness (Lvalue) decreased (p<0.05). The water activity and viscosity of the spread decreased with an increased amount of added peach powder. The results of the sensory test with spread premix prepared with 10% peach powder had the highest score for color, taste, texture, stickiness, and overall acceptability (p<0.05). We suggested that the peach spread premix made with 10% peach powder may be the most desirable for manufacturing spread premix and for improving sensory preference.

This study was conducted to investigate the quality characteristics of peach jelly following the addition of various gelling agents (locust bean gum, carrageenan, xanthan gum). The various gelling agents were added to peach jelly at five levels (1.0, 1.5, 2.0, 2.5 and 3.0%), after which their effects on physicochemical properties, textural properties and sensory qualities were investigated. The total titratable acidity (TTA) of peach jelly was decreased with increases in gelling agent. Additionally, the sweetness and pH of peach jelly increased significantly as the amount of various gelling agents increased. Moreover, the lightness (L-value), redness (a-value) and yellowness (b-value) of peach jelly was decreased as the amount of gelling agent. Furthermore, the hardness, gumminess and chewiness of the peach jelly increased as the amount of gelling agent increased. Finally, the overall acceptance was higher for jelly containing 2.0% added gelling agent than for other samples. Based on the results of this study, it is recommended that mixed gelling agents be added to peach jelly at 2.0%.

This study is carried out in order to develop food materials for the promotion of rice consumption. In this study, we researched the physicochemical properties of extruded rice flour (ER) and gelatinization popped rice flour (GPR) by the extrusion process and by the popped method with milled rice and brown rice. The extrusion process used a couple of screw extruders. The extrusion parameter was kept constant at a feed moisture content of 25%, barrel temperature of 120℃ and screw speed of 400 rpm. GPR was prepared by batch popping machine after gelatinization of rice. In order to evaluate the physicochemical properties of ER and GPR, as well as the gelatinization rate, water soluble index (WSI), water adsorption index (WAI), DPPH radical scavenging activity and total dietary fiber content, the color value was carried out. The gelatinization rate was similar to 71.1～73.8%. Further, the results of WSI and WAI were increased at ER and GPR compared to the raw materials; ER was also higher than GPR. DPPH radical scavenging activity and total dietary fiber content showed a tendency to reduce after extrution and popping. As a result of the color value, the L value of ER decreased more than the raw materials, whereas GPR increased at a and b values.

쌀가루제품은 밀가루 제품에 비하여 알레르기 유발율이 낮으므로, 영유아용 제품으로 개발될 수 있는 가능성이 크다. 특히, 영유아용 식품은 치아발달이 미숙한 영유아에 적합하도록 침에 의해서 쉽게 녹여 삼킬 수 있어야 하는데, 본 연구에서 개발된 팽화쌀과자는 이러한 특성을 모두 만족하고 있다. 본 연구에서는 쌀가루로부터 쌀압출물을 제조한 후 팽화시켜 다공질이 많은 구조를 갖는 쌀과자를 제조하였다. 팽화쌀과자의 팽화율은 1.8배이었으며, 경도는 대조군으로 연구된 Graduates 및 Little과 유의적 차이를 보이지 않았다. 팽화쌀과자의 수분흡수량은 상대습도가 증가함에 따라 증가하였으며 수분 흡수속도는 상대습도 30-40% 구간에서 0.0024 mg/hr로 가장 낮았다. 본 연구에서 개발된 팽화쌀과자는 기존 쌀가공품이 보이는 딱딱한 물성을 다공성의 구조의 형성을 통하여 개선하였으며, 이는 영유아의 씹힘과 삼킴에 부담을 줄이며 저작운동을 유도하여 치아발달에 도움을 제공할 수 있다. 본 연구의 팽화쌀과자와 같은 팽화쌀제품의 개발을 통하여 기존에 밥, 떡, 주류 중심의 쌀제품에서 탈피하여 쌀가공품의 다양화에 이바지할 수 있다.

지난 수십 년 동안 태평양 연안을 따라 발생했던 지진해일은 막대한 인명 및 재산피해를 초래하였다. 우리나라의 동해안은 갑작스러운 지진해일의 내습으로부터 안전하지 않고, 과거 지진해일에 의해 피해를 입었다. 본 연구의 목적은 우리나라 지진해일의 연구를 과거, 현재, 미래에서의 관점에 서 검토하는 것이다. 아울러, 전파모형과 범람모형으로 구성된 수치모형 및 수리실험에 관하여 서술한다. 또한, 이어지는 논문에서는 지진해일 현장조사, 지진해일 피해를 경감시키기 위한 노력과 지진해일 재해정보도 및 앞으로 더 연구해야할 주제 등에 대해서 소개한다.

염수 침지 여부를 고려한 장담금법에 따른 저염 된장의 품질특성 변화를 조사하기 위하여 염 농도를 달리하여 6개 월 동안 발효시킨 후 품질특성 변화를 살펴보았다. 수분 함량에서는 염수 침지한 12% 메주 된장에서 55% 수준으로 가장 낮았으며, 나머지 된장 시료들은 대략 60% 수분 함량을 나타냈다. pH는 장 담금 초기부터 메주 된장이 메줏가루 된장에 비해 높았으며, 특히 발효기간 내 8% 메주 된장의 경우 감소폭이 적었고 이는 산도 변화에서도 담금 직후부터 발효 6개월까지 메주 된장이 메줏가루 된장보다 낮은 경향을 나타내어 상관성을 보여주었다. 환원당 함량은 1-2개월 내에 최대값을 나타내고 이후 감소하는 경향을 나타냈으나, 발효기간 내 8% 메줏가루 된장이 가장 높아, 염도 및 장 담금법 간에 상관성은 낮았다. 아미노태 질소 변화는 담금 직후에는 염 농도가 낮을 수록 높은 값을 나타냈으며, 메주 된장에서 메줏가루 된장보다 높은 값을 보였다. 암모니아태 질소 함량은 발효초기에는 12% 메줏가루 된장에서 가장 높은 값을 나타냈으며, 메줏가루 된장이 메주 된장보다 높은 값을 보였지만, 이후 급격히 감소하여 시료 간 차이를 보이지 않았다. α-Amylase 효소 활성은 모든 시료가 발효 초기에는 0.91-0.94 Unit/g 수준이었다가 이후 일정하게 감소하여 0.01-0.06 Unit/g 값을 나타내었는데, 특히 8% 메주 된장에서는 완만한 감소를 보였다. Protease 효소 활성은 발효 2주차에 메주 된장이 메줏가루 된장에 비해 높은 활성을 나타냈으나 이후 감소하여 비슷한 수준을 나타내었다. 총 균수는 발효초기부터 메주 된장에서 메줏 가루 된장보다 높은 값을 나타내었고, 발효 6개월째 메주 된장이 7.8-8.0 log CFU/g로 메줏가루 된장(7.2-7.5 log CFU/g)보다 통계적으로 유의하게 높은 값을 보였다. 맛 센서를 통한 맛 분석결과, 비록 12% 시판 된장에 비해 제조 한 된장이 높은 짠맛과 쓴맛, 낮은 풍미를 나타내었지만, 8% 메주 된장이 시판 된장과 전반적으로 유사한 맛 패턴을 보였다. 유리 아미노산 함량은 숙성기간 동안 장가르기 여부에 따라 메줏가루 된장에서 증가폭은 컸으나 메주 된장의 함량이 높았으며, 염도 8% 된장에서 12% 된장보다 높은 값을 보였다. 결론적으로 염수 침지 여부에 따른 된장의 품질 특성을 비교한 결과, 장담금 과정을 거친 저염 된장이 품질 특성뿐만 아니라 맛 분석결과에서 좋은 평가를 나타내 었고, 아울러 메줏가루를 이용한 간편 저염 장류 제품 개발 을 위한 기초 자료로 활용될 수 있을 것으로 기대된다.

This study carried out to determine the physicochemical components of Cynanchi wilfordii Radix (CWR) fermented with Rhizopus delemar. The physicochemical components such as changes on moisture content, pH, total acidity, reducing sugars, and the contents of free sugars, free amino acid, cynandione A were investigated. The moisture content of fermented CWR was increased after 4 days of fermentation. The pH value of fermented CWR was decreased after 4 days of fermentation. The reducing sugars contents were in the range of 1.42-1.69%. The major free sugars were identified as rhamnose, glucose, fructose and sucrose. The content of free sugars was decreased during fermentation process of CWR while the glucose contents in 80% ethanol and water extracts were increased. In addition, the free amino acid increased significantly during fermentation. Finally, The content of cynandion A of the fermented CWR was highest at the level of 14.09 mg/g on the 8th day. These results are indicated that fermentation with Rhizopus strains could be used to increase the bioactivity of CWR and the fermented CWR can be used as a functional material and edible resource in the food industry.

The purpose of this study was to investigate the physiochemical properties of Doenjang was fermented by added with fungi and protease. The moisture content and pH of Doenjang added with protease (WP) were lower than those of control w/o protease while the contents of titratable acidity, reducing sugar, and amino-type nitrogen in WP were higher than control. The α-amylase activities of Doenjang added with single and mixed Protease B were the highest at 4 weeks of fermentation period and protease activity of WP was about 4 times higher than that of control. The 4-9 kinds of free amino acids (proline, isoleucine, leucine, and phenylalanine etc.) in WP was increased in comparison with control. The DPPH radical scavenging activity and total polyphenol content were higher in WP than control. Total aerobic bacterial and fungal numbers were decreased depending on fermentation time regardless of addition of protease. In conclusion, the protease can be used as additives improving the quality and taste of fermented Doenjang.

A numerical approximation for modeling morphological behavior in open channels is presented in this paper. The scheme is based on Godunov-type finite volume method which is preferred for its conservation preserving ability. The Saint Venant equations for river flow coupled with sediment continuity form the governing system of equations. Flux computation through cell interfaces is computed by Harten-Lax-van Leer-Contact (HLLC) approximate Riemann solver method at each time step. Second-order temporal and spatial accuracy is confirmed by employing Henn’s method and high-order reconstruction technique with limited gradient, respectively. The coupled model is able to handle discontinuities in surface water flow and bed profiles, and prevent spurious oscillations in all cases. A hydrostatic reconstruction technique is used to handle wet-dry fronts and avoid negative water depths and unphysical high velocities in complex domains. A modification in surface gradient method satisfies the well-balancing between flux computations of momentum and slope-source terms. Comparison of model-results for various tests with their analytical and experimental solutions shows that our numerical scheme is robust in simulating steady and unsteady flows over a various domains.