The nuclear facilities at Korea Atomic Energy Research Institute (KAERI) have generated a variety of liquid radioactive waste and most of them have low-level radioactive or lower levels. Some of the liquid radioactive waste generated in KAERI is transported to Radioactive Waste Treatment Facility (RWTF) in 20 L container. Liquid radioactive waste transported in a 20 L container is stored in a Sewer Tank after passing through a solid-liquid separation filter. It is then transferred to a very low-level liquid radioactive waste Tank after removing impurities such as sludge through a pre-treatment device. The previous pre-treatment process involved an underwater pump and a cartridge filter device passively, but this presented challenges such as the inconvenience of having to install the underwater pump each time, radiation exposure for workers due to frequent replacement of the cartridge filter, and the generation of large amounts of radioactive waste from the filter. To address these challenges and improve efficiency and safety in radiation work, an automated liquid radioactive waste pre-treatment device was developed. The automated liquid radioactive waste pre-treatment device is a pressure filtration system that utilizes multiple overlapping filter plates and pump pressure to effectively remove impurities such as sludge from liquid radioactive waste. With just the push of a button, the device automatically supplies and processes the waste, reducing radiation hazards and ensuring worker safety. Its modular and mobile design allows for flexible utilization in various locations, enabling efficient pre-treatment of liquid radioactive waste. To evaluate the performance of the newly constructed automated liquid radioactive waste treatment device, samples were taken before and after treatment for 1 hour cycling and analyzed for turbidity. The results showed that the turbidity after treatment was more than about four times lower than before treatment, confirming the excellent performance of the device. Also, it is expected that the treatment efficiency will improve further as the treatment time and number of cycles increase.