The need for the development of sustainable, efficient, and green radioactive waste disposal methods is emerging with the saturation of spent nuclear waste storage facilities in the Republic of Korea. Conventional radioactive waste management methods like using cement or glass have drawbacks such as high porosity, less chemical stability, high energy consumption, carbon dioxide production, and the generation of secondary wastes, etc. To address this gigantic issue of the planet, we have designed a study to explore the potential of alternative materials having easy processability, low carbon emissions and more chemical stability such as ceramic (hydroxyapatite, HAP) and alkali-activated materials (geopolymers, GP) to capture the simulated radioactive cobalt ions from the contaminated water and directly solidify them at low temperatures. Physical and mechanical properties of HAP alone and 15wt% GP incorporated HAP (HAP-GP- 15) composite were studied and compared. The surface of both materials was fully sorbed with an excess amount of Co(II) ions in the aqueous system. Co(II) sorbed powders were separated from aqueous media using a centrifuge machine operating at 5,000 RPM for 10 minutes and dried at 100°C for 8 hours. The dried powders were then placed in stainless steel molds, and shaped into cylindrical pellets using a uniaxial press at a pressure of 1 metric ton for 1 minute. The pellets were sintered at 1,100°C for 2 hours at a heating rate of 10°C/min. Following this, the water absorption, density, porosity, and compressive strength of the polished pellets were measured using standard methods. Results showed that HAP has a greater potential for decontamination and solidification of Co(II) due to its higher density (2.65 g/cm3 > 1.90 g/cm3), less open porosity (16.2±2.9% < 42.4 ±0.9%) and high compressive strength (82.1±10.2 MPa > 6.9±0.8 MPa) values at 1,100°C compared to that of HAP-GP-15. Nevertheless, further study with different constituent ratio of HAP and GP at various temperatures is required to fully optimize the HAP-GP matrix for waste solidifications.

We report the discovery of a giant exoplanet in the microlensing event OGLE-2017-BLG-1049, with a planet―host star mass ratio of q = 9.53 ± 0.39 × 10-3 and a caustic crossing feature in Korea Microlensing Telescope Network (KMTNet) observations. The caustic crossing feature yields an angular Einstein radius of θE = 0.52 ± 0.11 mas. However, the microlens parallax is not measured because the time scale of the event, tE ≃ 29 days, is too short. Thus, we perform a Bayesian analysis to estimate physical quantities of the lens system. We find that the lens system has a star with mass Mh = 0.55+0.36 -0.29 M⊙ hosting a giant planet with Mp = 5.53+3.62 -2.87 MJup, at a distance of DL = 5.67+1.11 -1.52 kpc. The projected star{planet separation is aㅗ = 3.92+1.10 -1.32 au. This means that the planet is located beyond the snow line of the host. The relative lens{source proper motion is μrel ~ 7 mas yr-1, thus the lens and source will be separated from each other within 10 years. After this, it will be possible to measure the flux of the host star with 30 meter class telescopes and to determine its mass.

In this study, the effects of heat-moisture treatment (boiling or steaming for 45 min) prior to hot air drying (70 o C for 8 h) on water activity (Aw), moisture (MC), Brix, color, and texture of dried sweet potato slices were investigated to identify the best pretreatment condition for producing dried sweet potato with the best eating quality. Dried sweet potato slices pretreated by boiling (BL) showed significantly lower Aw, MC, and hardness while Brix was significantly higher than with steaming (ST) treatment. There were no significant differences for the color, springiness, cohesiveness, gumminess, and brittleness indexes. At 8 h drying, the Aw, MC, Brix, and hardness of the BL and ST samples were 0.81 and 0.82, 19.71% and 25.53%, 53.80% and 49.40%, and 20.49 kg/cm 2 and 31.98 kg/ cm 2 , respectively. This information will be useful for manufacturers in the production of dried sweet potato slices. These findings provide evidence of the feasibility of heat-moisture treatments in the production of dried sweet potato.

We studied the infection rate of and various metacercariocidal approaches to controlling Gymnophalloides seoi for prevention of human infection in cultured and natural oysters in Korea. The selected survey areas were Aphae-do (Shinan-gun, Jeollanam-do), which is an endemic area for G. seoi, and Tongyeong (Geonsangnam-do), which is the main production area of oysters in Korea. In the Tongyeong area, the metacercariae of G. seoi were not detected in cultured oysters (0/201) or wild oysters (0/134). Seventy-two G. seoi metacercariae were observed in 33 of 265 natural oysters collected from Aphae-do; however, metacercariae were not detected in the cultured oysters (0/1101) purchased from the Daejeon Fish Market. To investigate the viability of G. seoi metacercariae, various metacercariocidal treatments were used with 3.5% saline and oyster juice used as positive controls. The metacercariae survived for 75.4 h in 3.5% saline and 112.6 h in oyster juice. After the metacercariocidal treatment, G. seoi metacercariae were survived for 13.29 min in tap water, < 20 sec in 4.3% vinegar, no effect in a rinse of the whole oyster body in 70°C water for 1 sec, but 1 sec in a rinse of the whole oyster body in 90°C water for 1 sec. The greatest metacercariocidal effect on G. seoi was from rinsing oysters in 90°C water followed by those from treatment with 20% ethyl alcohol, 4.3% vinegar, and tap water. However, we suggest that the most actual prevention to G. seoi human infection is rinsing the oysters with tap water for at least 30 min.

This study was carried out to investigate the management characteristics and techniques by comparing and analyzing the process of mixing, sterilization, cooling, inoculation and incubation for bag cultivation of L. edodes. The medium was sterilized after mixing it for 30 minutes, 1 and 2 hours respectively. The general moisture content of the sawdust substrate has been adjusted to 65%, while the case of the L. edodes substrate was 55%. Only 5% of wood chips of 5-8 mm in particle size were mixed to secure the space of the sawdust particles. As a result, mycelial growth was 1.4cm faster and the density was better(+++) than control(++). Wood chips are soaked in advance for a week during winter and 4 days during summer. There is an average number of 1.6x108 (cfu) of microorganisms in the sawdust that has been piled for six months outdoor. In summer, it has to be used immediately after mixing sawdust. High-pressure sterilization should be performed to use as a mushroom spawn, and to improve physical properties, it was great to sterilize the medium at a normal-pressure. There are height and width type for bags to be consumed for bagging. When the height was reduced into 17cm and the width was increased into 13cm, the browning period was shortened by 30 days and the period of mycelial growth was shortened by 25 days. The sterilized medium had an average of 4x103(cfu) of microorganisms at 25°C and 1.3×102 (cfu) at 15°C. After 25 days from inoculation in vitro, the growth condition of sawdust was the best with 13.2 cm, followed by grain spawn and liquid respectively. When inoculated with liquid spawn, the moisture content of substrate should be adjusted to 55% to 50% in advance.

Wrinkles are an outward sign of cutaneous aging appearing preferentially on ultraviolet B (UVB)-exposed areas. The anti-wrinkle effects of herbal extracts were investigated in an animal model. Female albino hairless mice (HR/ICR) were randomly allocated to the control group (non-irradiated vehicle), positive control group (UVB irradiated-vehicle), and two herbal extract mixture groups (HE-1 and HE-2). HE-1 included Glycyrrhizae radix, Rhei Rhizoma, Cornus officinalis, and Sesami semeni, and HE-2 included Swertia pseudo-chinensis, Sophora flavescens, Scutellaria baicalensis, and Salvia miltiorrhiza. The herbal extract mixtures were pre-treated dorsally with 0.2 ml per individual five times per week for four weeks prior to the start of UVB irradiation. At the fifth week, the animals were exposed to UVB irradiation for a subsequent eight weeks, three times per week. The intensity of irradiation showed a gradual increase, from 30 mJ/cm 2 to 240 mJ/cm2 (1 MED: 60 mJ/cm2 ). Dorsal skin samples were stained with H&E in order to examine the epidermal thickness. In addition, Masson-Trichrome staining was performed for determination of the amount of collagen fiber. Treatments with HE-1&2 resulted in an increase in the amount of collagen fiber, a better appearance, and fewer wrinkles, compared with the positive control. As determined by hydroxyproline assay, treatments with HE-1&2 led to a significant increase in the amount of collagen, compared with the positive control group (p<0.05). Chronic UVB irradiation to skin of hairless mice resulted in an increase in expression of matrix metalloproteinase-1 (MMP-1), however, treatments with HE-1&2 tended to decrease the expression of MMP-1. These results indicate that the herbal extracts used in this study have a preventive effect on UVB-induced wrinkle formation in a hairless mouse model, due in part to inhibition of MMP-1 expression and increment of collagen amount.