In this paper, the design of hydraulic system for leveling control of a large vehicle was developed. The hydraulic system for leveling control was consisted of four hydraulic actuators and two gravity referenced inclinometer. In order to verify the effectiveness of leveling system via simulation, Hydraulic actuators, vehicle and control algorithm were modeled using ADAMS which is a commercial dynamic analysis software for multi-body system. The test and simulation results of hydraulic actuator were compared and it showed the properness of simulation model. The effectiveness of hydraulic system and leveling control algorithm were verified via simulation results.

Structural system involves random conditions such as material property, geometric parameters and applied loads. This is caused by either measurement inaccuracy or system complexity and must be designed to withstand the uncertainties, Random structures may be modelled by using the finite element method using Monte Carlo simulation. It can be applied easily to any structural system with random parameters. The aim of this paper is to find the shape optimal design for the cantilever beam with random input variables to the height and response parameters to the displacement and stresses. The probabilistic design is carried out using ANSYS probabilistic design module in a commercial application software and then the optimal design is sequentially solved. An efficient and practical shape optimal design evaluation method is proposed for the design of the cantilever beam shape. The numerical results are obtained where total volume of the beam, stresses and displacements in the beam treated as constraints

District Metered Area (DMA) construction is one of the most cost effective alternatives for management of water loss (i.e., water leakage) and energy consumption (i.e., water pressure) in water distribution systems. Therefore, it’s being implemented to numerous new and existing water distribution systems worldwide. However, due to the complexity of water distribution systems, especially large-scale and highly looped systems, it is still very difficult to define the optimal boundary of DMAs considering all the aspects of water distribution system management requirements. In this study, a DMA design methodology (or a DMA design model) was developed with Geographic Information Systems (GIS) and hydraulic distribution system model to determine the optimal DMA boundary.

본 연구에서는 공리적 설계 방법론에서 중요한 2가지 공리 중 독립공리를 시스템 개발에서 설계 기준으로 적용하였다. 기능 요구사항과 대응하는 설계 파라메터는 설계행렬을 구성하고 이를 이용하여 독립공리에 부합하는 설계 파라메터의 순서를 정한 후 블록 레벨링 시스템에서의 독립적 구성요소를 판별하였다. 이러한 공리적 설계의 결과로서 설계 순서에 맞는 블록 레벨링 시스템 구성을 도출하였다. 도출된 블록 레벨링 시스템 구성의 검증과 확인을 위해 블록 조립 현장에서 사용하고 있는 3차원 좌표 측정기인 토털 스테이션을 사용하여 실제 조립이 완료된 블록에 대하여 구현된 블록 레벨링 시스템을 적용하여 데이터를 비교하는 시험을 수행하였다. 토털 스테이션의 측정 데이터와 블록 레벨링 시스템의 수신 데이터를 비교하여 1 mm 이내의 정밀도로 블록 레벨링 시스템이 동작함을 검증하고 확인하였다.

This study documents the 3-phase BLDC(Brushless DC) motor to improve conventional ventilator motor. Energy efficiency, noise, and air pollution reduction for the high-performance vibration of the BLDC motor has been used in many fields. BLDC motors for ventilator, we studied the controller and software.

Recently, a lot of smart devices such as smart phones have been spread. The research on smart education based on the devices are being actively investigated. A typical example of them is EPub3.0 proposed by the IDPF. Even if the educational content has supported multimedia such as image, video, text to speech and etc, it does not support a 3D virtual content yet. So a virtual reality-based education has not been achieved. In this paper, we propose an educational content system in which a virtual education simulation is possible through smart devices. To do it, the proposed system consists of an authoring tool creating 3D virtual educational content, and a viewer visualizing the content. The experimental results showed possibility of virtual experience education.

In this study, we propose an innovative lateral force distribution building system between tall buildings by utilizing the difference of moment of inertia, as the alternative design for highly integrated city area. Considering a tri-axial symmetric conditions and boundary conditions for the three-dimensional building structure system, a two-dimensional model is composed. In the proposed indeterminate structural model, important design variables are determined for obtaining minimum horizontal deflections, reactions and bending moments at the ground level of the buildings. Regarding a case of the provided two spatial structures connected to 4 buildings, the optimum location of middle located spatial structure is 45% from the top of the building, which minimize the end moments at the bottom of the buildings. In the considered verification examples, reduced drifts at the top location of the building systems are validated against static wind pressure loads and static earthquake loads. The suggested hybrid building system will improve the safety and reliability of the system due to the added internal truss-dome structures in terms of more than 30% reduced drift and vibration through the development of convergence of tall buildings and spatial structures.

A CCTV inspection method has been widely used to assess sewer condition and performance, but Korea lacks a proper decision support system for prioritizing sewer repair and rehabilitation (R&R). The objective of this paper is to introduce the results that we have developed in the Sewer Condition Assessment and Rehabilitation Decision-making (SCARD) Program using MS-EXCEL. The SCARD-Program is based on a standardized defect score for sewer structural and hydraulic assessment. Priorities are ranked based on risk scores, which are calculated by multiplying the sewer severity scores by the environmental impacts. This program is composed of three parts, which are decision-making for sewer condition and performance assessment, decision-making for sewer R&R priority assessment, and decision-making for optimal budget allocation. The SCARD-Program is useful for decision-makers, as it enables them to assess the sewer condition and to prioritize sewer R&R within the limited annual budget. In the future, this program logic will applied to the GIS-based sewer asset management system in local governments.

목 적: 기존의 콘택트렌즈 분석기에서 1매의 렌즈를 삭제하여 시스템을 간소화하고, 수차를 감소시켜 콘택트렌즈 표면의 선명한 상을 얻는 저가격 고성능의 광학계를 최적화 설계하였다. 방 법: 기존의 콘택트렌즈 분석기의 광학적 성능 분석과 최적화 설계에 사용한 파장은 프라운호퍼 C, d, F선(0.656 ㎛, 0.587 ㎛, 0.486 ㎛)이며 기준파장은 d선으로 하였다. Full field는 object height를 5 mm로 설정하였다. 참고모델의 광학적 성능 분석과 분석기의 최적화 설계에는 Zemax 14.2 설계 프로그램을 사용하였다. 결 과: 최적화 설계한 콘택트렌즈 분석기는 기존의 콘택트렌즈 분석기보다 Spot diagram RMS radius는 42.51% 성능이 향상되었다. 상질에 영향을 주는 구면수차는 96.96%, 비점수차는 68.39%, 종 방향 색수차는 39.29%, 횡 방향 색수차는 95.97% 향상되었고, 상면만곡과 왜곡수차는 각각 82.09%와 66.05%로 수차 성능이 향상되었다. 결 론: 기존의 콘택트렌즈 분석기보다 적은 수차와 적은 렌즈 매수를 갖는 새로운 광학계를 설계하였다. 설계한 콘택트렌즈 분석기는 저가격, 고성능의 성능 최적화가 이루어졌다고 볼 수 있다.

This study attempted to figure out the usage of the modular system in other fields through literature review and empirical study, analyze its structural method in fashion. After analyzing architecture & product-related books, the Internet data and previous studies, the modular system's five structural methods were obtained. Then, 991 photos of women's clothes from 2003 to 2014 were collected through the fashion websites in Korea and abroad. The results can be summarized as follows: First, the following five structures were derived: assembling structure, overlapping structure, arrangement structure, inserting structure and folding structure. Second, according to analysis on the structural method of the modular system in modern fashion, overlapping structure (34%) was the most common. Third, in fashion, the use of fastener for installation and removal is important for assembling structure. In terms of overlapping structure, 3D volume by vertical accumulation was commonly observed. Arrangement structure revealed a horizontal and flat shape through simple arrangement. In inserting structure, on the contrary, non-standardized modules were used as a part of clothes or decorative elements. In folding structure, origami technique for reduction and expansion was used.

철근 공사에는 원청 건설사, 골조 전문건설사, 배근시공도 작성자, 철근 가공장, 감독/감리사, 구조설계자 등 다수의 업무 주체가 참여하고 있으나 이들간의 합리적인 협업이 이루어질 수 있는 업무 프로세스가 구축되어 있지 않아 비효율을 초래할 가능성이 높다. 특히 철근공사는 RC골조 품질에 결정적 영향을 주는 업무이지만 참여 주체간 원활한 협업 부재로 인하여 골조의 품질 저하, 생산성 감소, 공기 지연 등 많은 문제를 야기하고 있다. 그러므로 RC골조공사는 혁신이 매우 시급한 분야라 하겠다. 최근 BIM은 건설산업의 기술 환경 패러다임을 전환시키는 기술로 인식되고 확산되고 있다. 그런데 3차원 모델 상에서 방대한 양의 철근상세정보를 모델링하기 위해서는 많은 시간과 노력이 소요되고, 모델링 후에도 데이터량의 방대함으로 인하여 프로그램 성능이 원활하게 발현되지 않기에 BIM 기술의 확산에도 불구하고 배근 설계와 시공과 관련하여 BIM 기술이 활용되고 있지 않은 상황이다. 본 기술은 3차원 BIM 환경 하에서 골조상세정보 모델링과 배근상세설계, 정밀물량산출 및 공사관리까지를 지원하는 Rebar HUB를 개발하여 RC 골조 설계 및 공사 프로세스를 합리화할 수 있는 실용적 기술 개발을 목표로 하였다.

‘In structural system, a certain amount of uncertainties always persists in material properties, geometric parameters and applied loads. In this study, the structure is designed to withstand the uncertainties which are caused by either measurement inaccuracy or system complexity. Random structures are modelled by using ANSYS probabilistic design module. It can be applied easily to any structural system with random parameters. The aim of this paper is to make optimal design for the beam with random input variables due to width and height and response parameters due to displacements and stresses. The probabilistic design is also carried out with ANSYS APDL and then the optimal design is sequentially solved. As the total volume of beam, stresses and displacements at the beam are treated as random parameters, the numerical results are obtained.'

본 연구에서는 초고층 건물의 풍동실험에서 얻어진 풍하중에 대하여 모드에 기초한 풍응답 해석을 수행하여 사용성을 검토하고, 목표 응답수준을 획득할 수 있는 수동 및 능동 질량형 장치의 예비설계까지 수행 가능한 프로그램을 개발하였다. 본 연구에서 개발된 프로그램을 실제 초고층 건물의 풍동실험결과에 적용하여 TMD와 AMD의 설계를 수행하였으며, 가속도 응답과 질량체 이송거리를 중심으로 결과를 비교분석하였다. TMD와 AMD 모두 요구되는 응답 수준을 만족하는 최소의 질량체를 사용하는 경우 질량체 이송거리가 증가하는 문제점이 발생하였다. 특히 AMD는 TMD 보다 적은 질량체로도 사용성 기준을 만족하는 응답수준을 획득할 수 있다는 장점이 있었으나, 질량체의 이송거리가 지나치게 커지는 문제점이 있으며, 고주파통과필터와 같은 부가적인 이송거리 저감대책이 요구된다.

This paper proposes the design and implementation of a system to provide a web-based ubiquitous 3D virtual reality education environment for secondary students to help experiment freely with safety by computer simulation in physics education. To realize this system, ThreeJS, one of the famous 3D graphics libraries based on javascript, has been used to support WebGL(Web Graphic Library). Hence the system became browser independent to give flexibility for most users. It is designed to make the mouse control change the position of the camera of the 3D graphics, so that the user can observe the virtual motion in various viewpoints. In contrast to the other local PC based education systems, this web-based system is much easier for distribution and management.