Many production management systems for increasing productivity, minimizing inventory, keeping due dates and maximizing use of resources have been proposed, and GT, MRP and JIT are frequently used among these systems. The three systems have merits and demerits through comparing with each other. Because each system has mutual dependence, a hybrid production system is necessary for using their merits maximally. In this study, a hybrid production system is designed by combining GT, MRP and JIT, which is suitable in the domestic production system.

Many production management systems for increasing productivity, minimizing inventory, keeping due dates and maximizing use of resources have been proposed, and GT, MRP and JIT are frequently used among these systems. The three systems have merits and demerits through comparing with each other. Because each system has mutual dependence, a hybrid production system Is necessary for using their merits maximally. In this study, a hybrid production system is designed by combining GT, MRP and JIT, which is suitable in the domestic production system and it is presented as followings. -. Basic research works for G7, MRP and JIT. -. Comparison and analysis are carried out for each system.- . The hybrid production system is designed. -. The hybrid production system is developed.

By successful establishment of SCM(Supply Chain Management) System they should make the supply chains speedy and combine production information system with the outcome system and thus they reinforce the competition of the production system of local enterprises in accordance with the rapid decision making This study is to develop the most appropriate production system models through the reflection of JIT system in the SCM which is the necessity of the times and its importance. To achieve this goal the researcher diversifies the prerequisites for the success of the business which will be the strategical factors of the production systems. The objects of this study is to develop the most appropriate production system models and to provide the enterprises with the models which are based on the SCM.

To keep enterprise's competitiveness on condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously in not only production and maintenance but also related Industrial safety. As we analyze in the surveys for the maintenance management of domestic enterprises and the causes of industrial accident, there will be necessity of drawing up countermeasures for prevention of industrial accidents and for ensuring expertise maintenance technologies. Based on these analyses, this study studied the safety information system, maintenance management information system, and the machinery condition diagnosis technique by using of the knowledge-based system under the internet environment. This web based knowledge-based diagnosis system can easily provide not only the knowledge of expert about deterioration phenomenon of industrial robot, but also the knowledge of relating safety and facility on everywhere, everytime. Therefore, when we use this system, it is expected to improve the efficiency of business processes in the production and safety.

Many enterprises are performing the effective database applications with VAN(Value Added Network) or WAN(Web Added Network) . But it is very difficult and expensive. So we suggest low-cost database system within long distance area through personal computers. This system is very powerful for flexibility. It may be estimated it's value highly because they develop the program without high programming skill. This study would be used between company with company and/or between branch with branch, for example, customer claim information, inventory information, product order etc. It is important not importing document but importing data in document. Then end-user can accomplish analysis and decision-making with their own database. It would enhance productivity in many enterprises.

Production schedule and realization quantity of Large type bus [929(HD), 928, 928-A(SD), 937E/L, 937/L,] were analyzed in order to intruoduce FMS(Flexible Manufacturing System) appropriate for varities of customer desire and multi-item, small lot production. And this paper is aimed to propose introduction method of FMS, analyzing zig tools change times and idle times with production line and workers as an object. According to analysis results, only simple spec., depending on bus type, changed with decrease in production. For 929(HD), 928,928-A(SD), 937Eh, 937/L bus type, there was no harmony between schdule and realization. Therefore, it caused many difficulties in part supply. And there was loss of manpower and reduction of productibility due to idle time of process with bus type change. Production processes were operated inefficiently because tact time exceeded or shortaged of allow time.

싱글트러스토마토시스템을 국내에 도입하여 효율적으로 생산관리를 하는데 필요한 자료를 제공하기 위하여 기존의 모델을 이용하여 지역별로 수확량, 수확시기를 예측하고 효율적인 생산관리 가능성을 분석한 결과를 요약하면 다음과 같다. 우리나라의 전지역이 겨울철에 최대수확 가능량을 달성하는데는 광량이 부족한 것으로 나타나 인공광을 이용한 생산량 증대가 가능할 것으로 판단되었다. 수원지역과 진주지역의 연간 총 수확량의 차이가 12kg.m-2 으로 나타나 토마토 온실의 설치 계획시 지역의 자연광 특성을 고려하여야 할 것으로 판단되었다. 지역과 계절에 따라 차이는 있으나 인공광을 이용하여 수확시기의 조절이 가능한 것으로 나타났다 인공광의 이용에는 많은 경비가 소요되기 때문에 인공광의 용량을 지역에 따라 적절하게 결정할 수 있는 방법과 저렴한 심야전기를 가능하면 많이 이용할 수 있는 인공광의 제어전략 등에 관한 추가적인 연구가 요구된다.

The objective of this study was to optimize the selection of sperm sources, optimal culture systems and vitrification method depends on sperm sources. The oocytes were inseminated with either KPN 105, 114, 191, SNU 101, 102, 103 or epididymis and then embryos inseminated were cultured in oviductal cell co-culture or HECM-6 as defined me dium. The blastocysts produced were pooled according to sperm sources as KPN, SNU or epididymis and then vitrified by OPP vitrification method. The results obtained were as follows: 1. The cleavage(86.2 or 84.7%) and development rates to blastocyst (30.6 or 32.0%) were not significantly different between oviductal cell co-culture or HECM-6 culture systems(P<0.05). 2. To determine the optimal sperm sources for using IVF in this system, cleavage rates in KPN 191 and SNU 101 (74.2, 55.8%) were significantly lower rather than those in KPN 105, 114, SNU 102, 103 or epididymis (86.7, 85.1, 89.8, 85.5 or 81.2%), but development rates to blastocyst in KPN 114, SNU 103 or epididymis sperm (30.0, 33.0 or 28.6%) were significantly higher rater than those in KPN 105, 191, SNU 101, 102(21.4, 15.4, 14.9 or 25.4%), respectively (P<0.05). 3. The blastocysts produced were pooled according to sperm sources as KPN, SNU or epididymis and then vitrified by OPP vitrification method. The survival rates were not significantly different among sperm sources (89.6%: 43/48 ; 90.1%: 46/51 ; 83.3% : 20/24). These results obtained indicate that the defined medium, HECM-6, could be use to produce of IVP bovine embryos. Since the frozen semen must be required to maintain of unvariation data in IVP embryo production system, KPN 114 and SNU 103 produced in our laboratory were useful for this purpose. The blastocysts produced by different sperm sources as KPN, SNU or epididymis were vitrified by OPP vitrification method and survived very high rates. The OPP vitrification method could be susceptibility to use of IVP bovine blastocyst embryos.

환원.확산법에 의해 Sm2Fe17Nx 계 희토류 영구자석을 제조하기 위한 기초연구로서, 우선 Sm2Fe17 금속간화합물의 제조를 위하여, 금속 Ca에 의한 Sm2O3의 환원반응과 Fe분말중에 Sm의 확산반응을 검토하였다. 그 결과 전자는 1000˚C이상의 고온의 경우에 매우 빠르게 완료되지만, 후자의 Fe분말의 중심까지 Sm의 확산반응의 완료(완전한 균질화조건)는 1100˚C에서 3h 정도의 R-D 반응이 필요하며, 이 확산반응이 전체반응에 있어서 율속단계임을 알았다. Sm-Fe 계의 금속간화합물들의 성장은 1000˚C이하에서는 SmFe2, SmFe3,Sm2Fe17금속간화합물의 3개의 상이 관찰되었으나, 1100˚C에서는 Sm2Fe17 금속간화합물의 상만이 관찰되었다. 본 연구에서 얻어진 최종시료의 산소 및 Ca량은 각각 0.72wt% 및 0.11wt%이었다.

본 연구에서는, 농업생산시설내 환경조절을 위한 시뮬레이터의 기본 시스템을 구축하고, 실내환경을 조절하면서 실측치와 예측치를 비교함으로써 적용성을 검토하였다. 모델은 비정상상태의 에너지 및 물질수지에 근거하여 구축되었고, PCSMP를 사용하여 아날로그형 프로그램이 가능하였다. 본 연구의 결과를 요약하면 다음과 같다. 구축된 환경조절용 시뮬레이터의 기본시스템은 기본모델, 광환경모델, 환경제어모델로 구성되어서 상호 독립적인 개발이 가능하였다. 기본모델은 본 시스템의 주요 부분으로써 열환경모델, 재배모델, 환기모델, 토양모델, 탄산가스모델을 구성되었고, 환경제어모델은 보온커텐, 냉난방기 및 지중열 교환을 고려하였다. 실제로 환경조절이 실시되고 있는 온실의 주간 및 야간의 실내온도의 실측치와 모델에 의한 예측치를 비교한 결과, 비교적 잘 일치되어서 그 적용성이 확인되었다.

Time-temperature relationship and microbiological quality were assessed and critical control points were identified through hazard analysis during the phases of production in two different packaged meals (Dosirak) manufacturing establishments (A, B:Kim Pab). Microbiological tests on foods, equipments and utensils were done according to standard procedures and included total plate count, coliforms and fecal coliforma. The results of the study are summarized as follows : time-temperature control management was needed because timetemperature abuse more than 8 hours at dangerous temperature zone (5-60℃) was observed from pre-preperation to distribution phase; Poor sanitary practices of employees were observed in hand washing and using disposable gloves; Microbiological analysis results of equipments and utensils showed possible cross-contamination risks when foods were contacted with them; Kim Pab needed thorough quality control because it included various mixed ingredients of cooked and uncooked and had many apportunities of cross-contamination either by equipments or hands through whole production processes.

Recently, the characteristic of plant production systems in Korea has been changed with the strong trends of integration and large scale, using environmental control techniques. To satisfy this change successfully, first of all, the environmental prediction inside the system must be preceded. While many environmental prediction models for plant production system were developed by many persons, each model cannot be applied to the every situation without the perfect understanding of source codes and the technical modification. The purpose of this study is building the environmental prediction model to predict and evaluate the environment inside the system numerically, and also developing the multipurpose program available for practical design. The model consisted of the basic system model, the cultivation related model and the environmental control related model. The contents of each model are as follows : the basic system model is dealing with thermal and light environments, soil environment and ventilation : the cultivation related model with soil and hydroponic cultures ; and the environmental control related model with thermal curtain and heat exchanging system. The environmental prediction model was developed using a common simulation program, PCSMP, so that it could be easily understood and modified by anyone. Finally, the model was executed and verified through comparison between simulated and measured results for soil culture, and both results showed good agreements.

여름철에 분무(噴霧) 수경재배(水耕栽培)를 통(通)해 옥수수의 청초(靑草) 사료(飼料) 생산(生産)에 관(關)한 실험(實驗)을 하기 위하여 1985년(年) 6월(月) 28일(日)부터 7월(月) 17일(日) 까지 경북대학교내(慶北大學校內) 비닐하우스에서 실시(實施)한 본(本) 실험(實驗)의 결과(結果)를 요약(要約)하면 다음과 같다. 1) 24시간(時間) 침종(浸種)후 48시간(時間) 전처리(前處理)한 다음 치상한 것이 생육(生育)에 좋다고 사료(思料)된다. 2) 육묘(育苗) 상자당(箱子當) 450 g 치상한 것이 생초(生草) 1kg 생육(生育)에 드는 종자(種子)값이 가장 적게 들었다. 3) Hyponex 1,000배, Yogen 300배로 영양제(營養劑)를 매일(每日) 산포(散布)하는 것이 생체중(生體重)이 가장 무거웠고, 2일(日)에 1회(回) 산포시(散布時)는 Yogen 300배로, 3일(日)에 1회(回) 산포시(散布時)는 Hyponex 500배로 산포(散布)하는 것이 좋다고 사료(思料)된다. 그러나 생초(生草) 1 kg 생육(生育)에 드는 최소(最少)의 종자(種子)값만 73만원 정도(程度)의 비용(費用)이 들므로 여름철엔 청초(靑草) 사료(飼料) 구입(購入)이 용이(容易)한 계절(季節)인 관계(關係)로 여름철에 별(別)로 효과적(效果的)인 방법(方法)이 못된다고 사료(思料)된다.

보리 및 맥주맥의 발아율(發芽率), 초장(草長) 및 생장율(生長率)에 미치는 전처리(前處理)의 효과(效果)를 조사(調査)하기 위하여 1984년(年) 11월(月) 5일(日)부터 12월(月) 5일(日)까지 실시(實施)한 본(本) 실험(實驗)의 결과(結果)는 다음과 같다. 공시(供試)한 각(各) 보리 품종(品種)들의 prechilling 처리(處理)에 대한 효과(效果)는 5~8일간(日間)의 처리(處理)에서 발아율(發芽率)이 가장 높았고, 맥주맥은 8일간(日間)의 처리(處理)에서 가장 높았다. predrying에서는 사천 6호(號)만 5일간(日間)의 처리(處理)에서 발아율(發芽率)이 가장 높았고, 그 외의 품종(品種)들은 공(供)히 7일간(日間)의 처리(處理)에서 가장 높은 발아율(發芽率)을 보였다. 생장율(生長率)은 모든 품종(品種) 공(供)히 5~8일간(日間)의 Prechilling 처리(處理)에서 가장 높았으며, Predrying은 오월보리와 향맥이 3일(日), 사천 6호(號) 5일(日) 및 알보리 7일간(日間)의 처리(處理)에서 각각(各各) 높은 생장율(生長率)을 보였다. 초장(草長)은 모든 보리 품종(品種) 공(供)히 5일간(日間)의 Prechilling 처리(處理)에서 가장 길었으며, 맥주맥 품종(品種)들은 8일간(日間)의 처리(處理)에서 가장 길었다.

대관령지역에서 달리함에 따른 韓牛育咸牛의 放牧習性과 生産性을 규명하기 爲하여 Wye大學區, 輪換, 固定, 修正固定, 刈取給與區의 處理를 하였다. 供試面積은 5ha, 공시두수는 육성빈우 20두였으며 放牧習性을 調査하기 爲하여 아침 5:00시부터 20:00시 까지 每 2.5분(2분 30초) 마다 調査하여 얻어진 結果는 다음과 같다. 1. ha당 증체량에 있어서 Wye大學區와 輪換區가 바른 처리구보다 많았으나 山地草地放牧方法으로서 實在로 運用하는데는 윤환구나