PURPOSES : In this study blast furnace slag, an industrial byproduct, was used with an activating chemicals, Ca(OH)2 and Na2SiO3 for carbon capture and sequestration as well as strength development. METHODS: This paper presents the optimized mixing design of Carbon-Capturing and Sequestering Activated Blast-Furnace Slag Mortar. Design of experiments in order to the optimized mixing design was applied and commercial program (MINITAB) was used. Statistical analysis was used to Box-Behnken (B-B) method in response surface analysis. RESULTS : The influencing factors of experimental are water ratio, Chemical admixture ratio and Curing temperature. In the results of response surface analysis, to obtain goal performance, the optimized mixing design for Carbon-Capturing and Sequestering Activated Blast- Furnace Slag Mortar were water ratio 40%, Chemical admixture ratio 58.78% and Curing temperature of 60℃. CONCLUSIONS: Compared with previous studies of this experiment is to some extent the optimal combination is expected to be reliable.

PURPOSES : This study is to evaluate the feasibility of using the alkali activated cement concrete for application of partial-depth repair in pavement. METHODS : This study analyzes the compressive strength of alkali activated cement mortar based on the changes in the amount/type/composition of binder(portland cement, fly ash, slag) and activator(NaOH, Na2SiO3, Na2CO3, Na2SO4). The mixture design is divided in case I of adding one kind-activator and case II of adding two kind-activators. RESULTS : The results of case I show that Na2SO4 based mixture has superior the long-term strength when compared to other mixtures, and that Na2CO3 based mixture has superior the early strength when compared to other mixtures. But the mixtures of case I is difficult to apply in the material for early-opening-to-traffic, because the strength of all mixtures isn't meet the criterion of traffic-opening. The results of case II show that NaOH-Na2SiO3 based mixtures has superior the early/long-term strength when compared to NaOH-Na2SiO3 based mixtures. In particular, the NaOH-Na2SiO3 based some mixtures turned out to pass the reference strength(1-day) of 21MPa as required for traffic-opening. CONCLUSIONS : With these results, it could be concluded that NaOH-Na2SiO3 based mixtures can be used as the material of pavement repair.

PURPOSES : To investigate the fundamental characteristics of blast-furnace slag mortar that was hardened with activating chemicals to capture and sequester carbon dioxide. METHODS : Various mix proportions were considered to find an appropriate stregnth development in regards with various dosages of activating chemicals, calcium hydroxides and sodium silicates, and curing conditions, air-dried, wet and underwater conditions. Flow characteristics was investigated and setting time of the mortar was measured. At different ages of 3, 7 and 28days, strength development was investigated for all the mix variables. At each age, samples were analyzed with XRD. RESULTS : The measured flow values showed the mortar lost its flowability as the activating chemicals amount increased in the scale of mole concentration. The setting time of the mortar was relatively shorter than OPC mortar but the initial curing condition was important, such as temperature. The amount of activating chemicals was found not to be critical in the sense of setting time. The strength increased with the increased amount of chemicals. The XRD analysis results showed that portlandite peaks reduced and clacite increased as the age increased. This may mean the Ca(OH)2 keeps absorbing CO2 in the air during curing period. CONCLUSIONS : The carbon capturing and sequestering activated blast-furnace slag mortar showed successful strength gain to be used for road system materials and its carbon absorbing property was verified though XRD analysis.

PURPOSES: The purpose of this study is to compare the alkali-silica reactivity for mortar bar and concrete prism specimens using crushed aggregates of 5 types in Korea. And the alkali-silica reactivity for those aggregates are measured by chemical test method. METHODS: The alkali-silica reactivity for those aggregates was measured by chemical test method of KS F 2545, mortar-bar test of KS F 2546, accelerated mortar-bar test method of ASTM C 1260 and concrete prism test method of ASTM C 1293, relatively. RESULTS: The alkali-silica reactivity for those aggregates was verified by chemical test of KS F 2546 and accelerated mortar-bar test of ASTM C 1260. However, it was not by mortar-bar test of KS F 2546 and concrete prism test of ASTM C 1293. CONCLUSIONS: The above results showed that relationship among the four test methods were very low. The results from 3 types of test methods using cement-aggregate combinations appeared to be different. Because the environmental conditions of test methods for measuring the alkali-silica reactivity such as equivalent alkali content(external source), humidity, temperature, and times were different though the aggregates were same. Moreover, alkali-silica reactivity showed the biggest impact when alkalis were supplied form outside and exposed to environmental conditions. The accelerated mortar-bar test method seems to be most appropriate test method for concrete structures exposed to alkali environment.

FRP products have been widely used in various fields of industry because of possessing high-strengths, corrosion resistance. Accordingly the waste FRP have also been increased and the effective recycling methods of waste FRP are needed. In this study, polymer mortar specimens were prepared with the various substitution amount of waste FRP powder. For finding the mechanical properties of polymer mortar added with waste FRP powder, compressive strength tests are conducted. From the test, we could find that compressive strength was increased with respect to the amount of waste FRP powder.

국내에서는 콘크리트 포장용 굵은 골재를 대상으로 화학적인 시험방법과 모르타르 봉 시험방법을 이용한 결과 알칼리-실리카 반응 유해 가능성이 낮은 것으로 알려져 왔으나, 최근에 알칼리 - 실리카 반응에 의한 파손이 발생되었고, ASTM C 1260을 이용한 결과 일부 골재에서 유해한 팽창이 발생된다고 보고되었다. 따라서 본 논문에서는 모르타르 봉 시험방법인 KS F 2546과 ASTM C 1260을 이용하여 길이 팽창 유도기간의 환경조건이 알칼리 - 실리카 팽창 반응 특성에 미치는 영향을 평가하고자 하였다. KS F 2546의 경우 대상 골재 모두 반응성 없음으로 판정되었으나 ASTM C 1260에서는 일부 골재에서 잠재반응성 이상으로 판정되었다. 이는 외부로부터의 알칼리 이온의 공급, 온도 및 습도 차이에 의하여 발생한 것으로 판단된다. 또한 ASTM C 1260에서 NaOH의 농도변화 실험을 통하여 NaOH의 농도가 증가할수록 길이팽창이 현저하게 증가한다는 것을 확인하였으며, 온도 및 습도가 증가함에 따라 길이팽창이 증가한다는 것을 확인하였다.

Functional Concrete Added Titanium Dioxide(TIO2) for photocatalysis was about a result strength Reduction by recent studies. Therefore, The purpose of the study is to review the possibility of TIO2 for using concrete admixture. As a result, Nano TIO2 for concrete admixture helps increased strength of concrete and here are some of the details. The compressive strength and flexural strength of cement mortar added same amount of Nano SF and TIO2 for admixture were development of strength a certain level each other. when Nano admixture use 10%, SF and TIO2 showed development of strength 60% and 40% each other gradually. If I use over 10% Both SF and TIO2, they showed irregular strength variations.

Precast concrete produced in the industry is advantageous in a sense that it meets certain requiring standards and thus is easy to manage, and it saves construction period by shortening concrete curing time in the field. Nevertheless, studies on the strength evaluation of PC material by steam curing have rarely been done. In addition，as concrete becomes of high strength, it is speculated that relevant steam curing temperature history is also required. Therefore this study is on the steam curing method in manufacturing precast concrete products, and cement mortar has been used for experiments to exclude the possibility that concrete aggregate granularity and aggregate shape change may affect on strength development by cement hydration. In addition, this research is to provide the fundamental information of industrial manufacture of PC member by suggesting the optimal steam curing condition. The optimal steam curing condition has been investigated from the relations between temperature history condition and strength development, via modifying temperature patterns in various ways such as pre-tirne, curing maximaI temperature, maximaI temperature maintenance time which are factors that affect on high strength concrete product in steam curing.

Furnace slag powder used currently in Korea needs to add special functions in response to the increase of large-scale projects. In addition, it is advantageous in that it has a lower hydration heat emission rate than ordinary Portland cement and improves properies such as the inhibition of alkali aggregate reaction, watertightness, salt proofness, seawater resistance and chemical reslstance. However, furnace slag powder is not self-hardening, and requires activators such as alkali for hydration. Accordingly, if recycled fine aggregate, from which calcíum hydroxide is generated, and furnace slag, which requires alkali stimulation, are used together they play mutually complementary roles, so we expect to use the mixture as a resource-recycling construction material. Thus the present study purposed to examine the properties and characteristics of furnace slag powder and recycled aggregate, to manufacture recycled fine aggregate mortar using furnace slag and analyze its performance based on the results of an experiment, to provide materials on mortar using furnace slag as a cement additive and recycled fine aggregate as a substitute of aggregate, and ultimately to provide basic materials on the manufacturing of resource-recycled construction materials using binder and fine aggregate as recycled resources.

Furnace slag powder used currently in Korea needs to add special functions in response to the increase of large-scale projects. In addition, it is advantageous in that it has a lower hydration heat emission rate than ordinary Portland cement and improves properties such as the inhibition of alkali aggregate reaction, watertightness, salt proofness, seawater resistance and chemical resistance. However, furnace slag powder is not self-hardening, and requires activators such as alkali for hydration. Accordingly, if recycled fine aggregate, from which calcium hydroxide is generated, and furnace slag, which requires alkali stimulation, are used together they play mutually complementary roles, so we expect to use the mixture as a resource-recycling construction material. Thus the present study purposed to examine the properties and characteristics of furnace slag powder and recycled aggregate, to manufacture recycled fine aggregate mortar using furnace slag and analyze its performance based on the results of an experiment, to provide materials on mortar using furnace slag as a cement additive and recycled fine aggregate as a substitute of aggregate, and ultimately to provide basic materials on the manufacturing of resource-recycled construction materials using binder and fine aggregate as recycled resources.

This study is basic experiment for estimating influence of strength by curing temperature of concrete's heat of hydration and estimate relationship of compressivε strength development by initial curing temperature factor, and then asume temperature factor which influence compressive strength development and for showing basic document of quality control. According to the result of cement mortar by the curing temperature factor high-curing temperature shows high strength on 3 day compare with low curing-temperature, shows higher strength than the piece of high curing temperature.

The bricks in Myung Dong Cathedral Church are now deteriorated by the weather such as temperature, humidity, and winds. Thus it is necessary to replace the old bricks to the restored bricks for the load bearing capacity as well as to prevent the penetrations of rains from outside. However the mortar composition is not well defined at this moment and there are literary about the mortar completions. Thus it is necessary to verify the mortar compactions between old bricks and results to bring the restoring the mortar for the replace of new bricks. The particles of mortar was collected from Myung Dong Cathedral Church and particle size was analyzed by the mortar and pestle and mechanicle floater. The X-ray diffraction and XRF of each particles are analyzed. The quartz and feldspar such as albite, kaolinite are observed in large particles(>1mm). However, the clicite was observed at lower than $43{\mu}m$ particles. In XRF analysis, the $SiO_2\;and\;K_2O$ are observed at large particles$(1mm-208{\mu}m)\;and\;CaCO_3$ is observed at small particles$(208-43{\mu}m)\;and\;CaCO_3$ is observed at small particles($208-43{\mu}m$). This is well coincide with XRD results. The optimum volume ratio of lime mortar would be 1: 2 ($CaO: SiO_2$).

본 연구에서는 실험을 통하여 자기치유 재료 혼입 모르타르 보의 자기치유 성능을 평가하였다. 실험에는 일반 모르타르 보 실험체와 자기치유 모르타르 보 실험체가 사용되었으며, 모르타르의 압축강도, 내력 및 균열의 자기치유 효과를 비교하여 자기치유 성능을 평가하였다. 실험결과 자기치유 재료를 혼입한 모르타르의 압축강도가 일반 모르타르의 압축강도보다 작았지만 28일 압축강도에 대한 118일 압축강도 비율은 동일하게 나타났다. 실험체의 내력은 재령일이 길어질수록 증가하는 경향을 나타냈다. 일반 모르타르 실험체는 균열이 발생할 경우 재령일이 증가하여도 하중은 회복되지 않았으나 자기치유 모르타르 실험체의 경우 반응 생성물의 영향으로 내력이 다소 회복되는 경향을 나타냈다. 균열폭은 두 종류의 실험체 모두 치유기간이 지난 후 감소하는 경향을 보였으나 자기치유 모르타르 실험체에서만 반응 생성물이 관찰되었다.

본 연구에서는 보수 모르타르와 직접 혼합 가능한 결정성장형 자기치유 고상캡슐을 제조하였으며, 자기치유 고상캡슐이 혼합된 보수 모르타르의 품질 및 균열 치유 성능 특성을 평가하였다. 자기치유 고상캡슐을 혼합한 보수 모르타르의 테이블 플로우 및 공기량 평가 결과 혼합율에 관계없이 테이블 플로우 및 공기량은 큰 영향이 없는 것으로 나타났다. 압축강도는 캡슐 혼합율이 증가할수록 강도가 감소하는 경향이 나타났다. 정수위 투수시험에 따른 균열 치유 특성 평가 결과 초기 투수량이 감소하는 결과가 나타났으며, 시간 경과에 따라 반응 생성물 발생하여 균열이 치유되는 것을 확인 할 수 있었다.

이산화탄소 농도가 높은 도심지의 경우 탄산화로 인한 철근부식이 발생하기 쉬우며 이는 콘크리트 구조물의 내구수명을 감소시킨다. 콘크리트 구조물의 경우 다양한 구속조건을 가지며 항상 외부의 재하하중을 받고 있다. 도입된 응력수준은 이산화탄소와 같은 유해인자의 확산을 변화시키며 탄산화 깊이의 변동성을 야기한다. 본 연구에서는 응력재하수준에 따른 탄산화 변동성을 정량화하였으며, 이를 이용하여 탄산화 예측식을 도출하였다. 내구성 설계인자인 피복두께, 이산화탄소 확산계수, 탄산화 반응 수화물, 그리고 외부 이산화탄소 농도를 확률 변수로 정의하였으며, MCS을 통하여 영향인자의 변동성에 따른 내구수명을 도출하였다. 또한 응력수준에 따라 변화하는 내구수명을 도출하였으며, 이를 결정론적인 방법의 결과와 비교하였다. 피복두께 및 내부 수화물 생성이 내구수명 변동성에 가장 큰 영향을 미쳤으며, 응력수준 을 고려한 내구수명평가는 유지관리 우선순위 설정에 합리적으로 적용할 수 있다.

본 연구에서는 코어직경에 따른 시멘트 모르타르의 부착강도 변동 특성을 분석하기 위하여, 코어직경 50mm 부착강도 13개 데이터와 코어직경 75mm 부착강도 17개 데이터를 활용하여 분석하였다. 부착강도의 평균값을 비교하면 코어직경 75mm의 값이 코어직경 50mm의 값에 비해 10.5% 정도 크게 나타났으며, 코어직경에 따른 부착강도의 변동계수(Coefficient of Variation) 값을 비교·분석한 결과 코어직경 75mm의 변동계수가 모든 시험 회차에서 상대적으로 작게 나타났다. 그러므로, 코어 직경에 따른 부착강도의 변동성을 최소화 하기 위해서는 코어직경 75mm를 사용하는 것이 바람직할 것으로 판단된다.

콘크리트의 워커빌리티 및 채움성은 구조물의 시공품질과 내구성에 직접적인 영향을 미치는 인자로서, 항복응력과 같은 유변상수에 의해 정량화할 수 있다. 또한, 콘크리트의 유변물성은 모르타르의 유변물성과 굵은 골재의 크기, 형상 및 부피분율을 고려하여 예측할 수 있다. 본 연구는 현장에서 사용가능한 플로우 시험을 통해 모르타르의 항복응력을 정량적으로 예측할 수 있는 모델식을 제안하고자 한다. 모르타르 배합에 대한 플로 테이블 시험과 상용 레오미터를 이용한 점도곡선 측정을 진행하였으며, 레올로지 모델을 이용한 점도곡선 정량화를 통해 항복응력을 수치화하였다. 최종적으로, 멱함수로 표현되는 항복응력과 플로 테이블 시험 결과간의 상관관계식을 수치해석 결과와 함께 제시하였다.

본 연구에서는 플라이애시가 90 %만큼 다량치환된 모르타르에 알칼리 활성화를 통한 강도증진을 동일한 양생온도 조건 에서 양생방법 및 유지시간 변화에 따라 비교 분석하고자 하였다. 연구 결과로 플래이애시를 90 % 치환한 경우, 소생재 도 포 후 40℃로 24시간 기중양생시 가장 높은 압축강도를 발휘하였지만, OPC의 압축강도까지 발휘하는 것은 어려울 것으로 분석되었다.