A fishing lamp is fishing gear to gather fish in the night. But the cost of oil which is used to a light fishing lamp, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnages. This cost has almost taken 30.40% of total fishing costs. As oil price increases, the business condition of the fishery gets worse and worse. Therefore, it is very urgent to develop an economical fishing lamp, to solve the problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery and hairtail angling fishery using the LED, which has excellent efficiency and durability. One fishing lamp has about 160Watt capacity and five fishing lamps are installed one aluminium panel in which sea water flows to emit generated heat from LED to outside. Developed fishing lamp lights to an effective direction of jigging and angling operation. This fishing lamp can be controlled to light the direction of fish shoal because the aluminium panel can be controlled to up and down direction. The wave length of fishing lamp has white and blue color. White color light is to gather fish shoal of horizontal direction and blue color light is to gather fish shoal of vertical direction. After development of this fishing lamp, 60.110 units are established on the boat, and operated fishing. Consequently, in the case of squid jigging, spent energy was reduced to 39%, in the case of hairtail angling, 68% of spent energy was reduced. And the catch was more than another boat.

This study was conducted to research how UCD(Ultra Constant Discharge) lamp lighting affects plant cultivation. To get the results within a short time, lettuce seedling was selected as a plant and nutrient hydroponic beds were used in a dark room for 100% artificial lighting. Two beds were installed for same distance lighting condition with UCD lamp and Hi-pressure Sodium lamp each and another two beds were installed for same light intensity condition with each type of lamp. After 15 days of cultivation, for both conditions, the yields under UCD lamp were weighed more than that under Hi-pressure Sodium lamp. The result can be analyzed that the spectrum of UCD lamp having near sunlight characteristic is much superior to that of Hi-pressure Sodium lamp having a line spectrum characteristic on yellow and red wavelengths for plant cultivation.

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as -50℃~+85℃. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form -50℃ to +85℃ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best CO2 reduction Green product.

백열전구를 대체하기위한 친환경 에너지 절약형 7W급 LED 램프의 구동을 위한 전원장치를 설계하였다. LED 램프는 칩 LED를 여 러개 직·병렬로 연결하여 사용하게 되므0로 적합한 직류 전압과 전류를 공급하여야 한다. 그런데 LED 램프는 상용 AC 220V 전원에 직접 연결 해 사용하게 되므로 드라이버에는 전압제어와 전류제어가 포함된 AC/DC, DC/DC 전력변환기가 반드시 필요하게 된다. 따라서 본 논문에서는 램프의 LED 열에 따라 출력전압과 전류제어가 가능하며 변압기가 없는 간단한 구조의 LED 램프 드라이버를 설계하였다.

The fishing lamp is a fishing gear that gathers fish at night. But the cost of oil, which is used to light fishing lamp, has been risen significantly up to 30-40% of total fishing costs. Therefore it is very urgent to develop an energy economical fishing lamp in order to solve the business difficulties of fisheries. Under this background, this research aims at developing a fishing lamp for squid jigging and hairtail angling fishery using the LED, which has excellent energy efficiency and durability. The LED fishing lamp developed can be controlled to fix a fit direction of fish shoal deep because a fishing lamp can be adjustable up and down directions. One unit of fishing lamp has about an 80Watt capacity and the frame of fishing lamp is made of aluminium to emit generated heat of LED to outside. The LED lamp developed was highly durable, only 5.7% of emitting efficiency decreased for 18 months. The illuminance of a unit LED lamp was 2,070lux at 1m and 21lux at 10 m distance, and the intensity of LED lamp system emitted 2,580lux and 400lux at the respective distances. After development of this fishing lamp, 100 units are installed on operating fishing vessels. Experimental results show that energy consumption of squid jigging and hairtail angling was reduced by 40% and 87%, respectively. In conclusion, our methods showed elevated fishing power, compared with traditional fishing method: 37.7% for squid jigging and 24.5% for hairtail angling.

Eu3+ -doped Y2O3 red phosphor was synthesized in a flux method using the chemicals Y2O3, Eu2O3,H3BO3 and BaCl2·2H2O. The effect of a flux addition on the preparation of Y2O3:Eu3+ red phosphor used asa cold cathode fluorescence lamp was investigated. H3BO3 and BaCl2·2H2O fluxes were used due to theirdifferent melting points. The crystallinity, thermal properties, morphology, and emission characteristics weremeasured using XRD, TG-DTA, SEM, and a photo-excited spectrometer. Under UV excitation of 254nm, Eu2O33.7mol% doped Y2O3 exhibited a strong narrow-band red emission, peaking at 612nm. From this result, thephosphor synthesized by firing Y2O3 with 3.7mol% of Eu2O3, 0.25mol% of H3BO3 and 0.5mol% of BaCl2·2H2Ofluxes at 1400oC for 2 hours had a larger particle size of 4µm on average compared to the phosphor of theH3BO3 flux alone. In addition, a phosphor synthesized by the two fluxes together had a rounder corner shape,which led to the maximum emission intensity.

TFT-LCD is the most popular type of flat display panel in the information technology field. The back light unit is a main part of the structure of a TFT-LCD panel. Occasionally, studies have shown that failures of the CCFL of the BLU occur due to the poor weld characteristics of these materials. The aim of this study was to prepare some technical data and to characterize a microjoined electrode for the CCFL. Microstructure examinations, microhardness measurements, resistance measurements and microtensile tests of the microjoined electrode were carried out. The result indicates that a large amount of grain coarsening exists in the heat-affected zone (HAZ) of the weld between the cup and the pin. This grain coarsening of the HAZ between the cup and pin is caused by the welding cycle, which may have an influence on the lowest microhardness values. Fracturing of the microjoined electrode also occurred at the HAZ close to the cup between the weld holding the cup and the pin. Additionally, no specific changes of the electrical resistance among the cup, pin, and lead wire themselves or in the microjoined electrode were observed.

A test was conducted using two high density discharge lamps, the H2D and the structurally new H4D. They were tested for luminous illumination and luminous temperature in the day and night time. The test was conducted without crippling the performance of the H2D by adding a magnetic actuator, enabling it to move left to right, and up and down. By making these modifications we constructed a sample of the H4D. We compared the H2D and the H4D sample's luminous illumination and luminous temperature by using a photometer and a digital thermometer in the day and night time. We discovered that the H2D and H4D performed similarly from the data we gathered. Now we know the H4D has potential use and extensive research needs to be made to gather more detailed data.

The objective of this GM Red-X project was to reduce customer complaints on Kalos, Lacetti, Magnus as reported through 2004.1 - 2005.1 warranty performance. Seatbelt alarm lamp mal-function problem is connected with safety. So it is critical issue. Seatbelt alarm lamp mal-function which caused by buckle occurred 22 cases from 2004.1 to 2005.1.

The display technology on the retina is the key role in inspecting the condition of the patients. Especially, silt lamp biomicroscope is one of the important tools to inspect the patient's retina, because the slit lamp biomicroscope, the workhorse for ophthalmic diagnosis and treatment, is far more ubiquitous, and is now often equipped with video attachments to permit image capture for documentation, storage, and transmission. In many cases, image quality may be, in part, attributable to a narrow field of view and specular reflections arising from the cornea and sclera. In this paper, we have real time extraction of the feature of retina image portion and then edges of blood vessel in retina images are detected. Based on the edges of the retina images, every image is assembled for more wide image. The developed algorithms allowed for highly accurate alignment and blending of partially overlapping slit lamp biomicroscopic fundus images to generate a seamless, high quality and wide field image. Therefore we verified the possibility that video image were acquisition and processing algorithms for mosaicking and enhancement of slit lamp biomicroscopic fundus images. The improved quality and wide field of view may confer for inexpensive, real time photo-documentation of retina abnormalities.

성판별을 위한 biopsy 후 수정란의 발달율 및 동결-융해 후의 생존율 조사는 다음과 같다. 한우 체내 및 체외 수정란의 성판별을 위해서 영양막 세포의 일부를 채취하기 위해서 수정란을 biopsy 하였다. biopsy된 수정란의 생존율 조사의 결과는 체내 수정란이 100% 그리고 체외수정란이 90.0%의 결과를 나타내어 체내수정란이 체외수정란보다 biopsy 후의 생존율이 높게 나타났음을 알 수 있었다. 수정란의 성판별 비율은 체내수정란에서는 암컷과 수컷의 비율이 46.3%와 53.7%로 각각 나타나 수컷의 비율이 암컷보다 다소 높은 경향을 보였으며, 체외수정란에 있어서는 암컷과 수컷의 비율은 40.0%와 60.0%로 수컷의 비율이 높게 나타났으나, 유의적인 차이는 보이지 않았다. 성 판별된 수정란의 동결-융해 후 생존성은 완만동결 방법에 의한 수정란의 생존율은 체내수정란에서 58.8%, 체외수정란에서는 41.7% 그리고 초자화 동결 방법에서는 체내수정란의 생존율이 77.8%, 체외수정란은 57.1%로의 결과를 보여 체내수정란을 이용한 초자화 동결 방법에서 상대적으로 더 높은 생존율을 보였다.

본 연구에서는 Bulk형 플라스틱과 유리 조광렌즈， 박막형 플라스틱 조광렌즈를 이 용하여 온도를 6 0C 에 서 UVA, UVB, UVC을 각각 조사하여 자외 선 파장에 따라 조 광렌즈의 변색전을 기준으로 조광렌즈의 색차에 대한 분석을 위하여 lN꺼Tis Spectrophometer로 조사시간을 다양하게 하여 측정하였다. Bulk형 플라스틱 조광렌 즈의 경우 6 0C 의 UVA에서 색상변화가 가장 크고， UVC 에서 가장 작았다. 유리조광 렌즈인 SINbr는 온도의 변화에 무관하게 색상변화가 거의 없었다. Bulk형 유리조광 렌즈의 눈에 띄는 감각정도는 광원과 온도에 관계없이 Slight에 해당하였다. Brown 색상이 Smoke 색상보다 온도와 광원에 무관하게 색상변화가 더 컸다. 광원에 따른 색상변화는 UVC에서 가장 작았다.

The transmittance properties of fishing lamp of the squid jigging vessel was investigated during nighttime operations in the Northwest Pacific on 21 and 29 September 2005. The metal halide lamps of white color(2.0kW×168) in the air and metal halide lamp of white color(10.0kW×1) in the underwater were used as a fishing lamp for gathering squids. The relative irradiance of metal halide lamp in the air showed peak in 850nm of wave length. The relationship between underwater illuminance(Y) and water depth(X) of metal halide lamp light in the observation areas is represented, Y=84.137e-0.1105X, R2=0.9974. The distribution of underwater illuminance of measure points St. 1-5 showed low value of 0.11x in 80m depth.

수정란의 성 판별은 유전적으로 우수한 유전형질을 보유하고 있는 소의 수정란을 성 판별하므로서 희망하는 성의 송아지를 생산할 수 있으며, 부가가치가 높은 수정란을 확보할 수 있는 기술이다. 수정란의 손상을 최소화하면서 할구를 biopsy하는 기술을 개발하고, 간단하고 빠른 시간에 성 판별이 가능한 Loop-mediated isothermal amplification방법으로 수정란을 성 판별을 실시한 결과는 다음과 같다. 1. 한우 체내 수정란의 성비는 암