For the release of the nuclear power plant site after the decommissioning, a reliable exposure dose assessment considering the environmental impact of residual radionuclides is essentially required. In this study, the Derived Concentration Guideline Level (DCGL) for the hypothetically contaminated surface soil at the Wolsong nuclear power plant (NPP) unit 1 site was preliminarily calculated by using the RESRAD-OFFSITE computational code and compared with the other case studies. Moreover, radiation exposure dose for local residents and relevant exposure pathways were quantitatively analyzed based on the calculation model established through this work. For the target site modeling, the source term was determined by referring to the previous case studies regarding the nuclear power plant decommissioning, quantification analysis data of pressure tubes of Wolsong NPP unit 1, and radionuclide data estimated by using the MCNP/ORIGEN-2 code. In total, 14 different radioisotopes such as Ag-108m, C-14, Co-60, Cs-134/137, Fe-55, H-3, Nb-93m/94, Ni-63, Sb-125, Sn-121m, Sr-90, and Zr-93 were considered as target radionuclides. In addition, the geological structure model of the Wolsong NPP site was established based on the final safety analysis report of Wolsong NPP unit 1. The distribution coefficients (Kd) were taken from the JAEA-SDB to estimate the migration/retardation behavior of various radionuclides under the groundwater condition of the Wolsong NPP site. In the present work, the DCGL values were calculated according to the site release criterion of 0.1 mSv/yr, which indicates the radiation protection standard for the site release. Moreover, the exposure pathway and sensitivity analyses were conducted to assess the sensitive input parameters remarkably influencing the calculation result. For the evaluation of exposure dose for local residents, a site layout centered around Wolsong NPP unit 4, located in the closest proximity to the residents’ habitation area, was alternatively established and all potential exposure pathways were considered as a comprehensive resident farmer scenario. The results obtained from this study are expected to serve as a preliminary case study for the DCGL values regarding the surface soil at the Wolsong NPP unit 1 site and for evaluating the radiation exposure dose to local residents resulting from the residual radioactivity at the site after the decommissioning.

For the disposal of radioactive waste from nuclear facilities, assessing their radioactivity inventories is essential. As a result, countries with nuclear facilities are implementing assessment schemes tailored to their respective policies and available resources for radioactive waste management. This paper specifically describes the assessment scheme for radioactivity inventory applied to metal waste generated during the dismantling of the Japan Power Demonstration Reactor (JPDR), a 1.25 MW BWR. The distinctive aspect of the Japanese approach lies in the fact that, for a pair of a key nuclide and a difficult-to-measure (DTM) nuclide that lack a significant correlation in their concentrations, the mean activity concentration method was used. In this method, an arithmetic average of all measurements of the DTM nuclide from representative drums, including MDAs (Minimum Detectable Activities), was assigned to the concentration of the DTM nuclide for all drums, regardless of the concentration of its paired key nuclide. Conversely, for a specific pair of a key nuclide and a DTM nuclide with a significant correlation, the scaling factor method was applied, as is common in many other countries. This Japanese case can serve as a valuable reference for Korea, which does not have the option of using the mean activity concentration method in its assessment scheme.

The decommissioning of Korea Research Reactor Units 1 and 2 (KRR 1&2), the first research reactors in South Korea, began in 1997 and the decommissioning status is currently proceeding with phase 3. It is expected that more than 5,000 tons of dismantled wastes will be generated as the contaminated building is demolished. Since these dismantled wastes must be disposed of in an efficient method considering economic feasibility, it is desirable to clearance extremely low-level wastes whose contamination is so minimal that the radiological risk is negligible. In Korea, in order to approve the clearance of radioactive waste, it must be proven that the nuclide concentration standards are met or that the dose to individuals and collectives is below the allowable dose value. At the KRR 1&2 decommissioning site, dismantled wastes have been steadily being disposed of through clearance procedure since 2021. Clearance was approved by the Korean Institute of Nuclear Safety (KINS) for one case of concrete waste in 2021 and two cases of metal waste in 2022. In 2023, the clearance of metal waste and asbestos waste has been approved so far, and in particular, this is the first case in Korea for asbestos waste. In this study, we compared the dose assessment methods and results of clearance wastes at the KRR 1&2 decommissioning site from 2021 to present. Dose assessment was conducted by applying the landfill scenario for concrete and asbestos and the recycling scenario for metal waste. The calculation codes used were RESRAD-onsite 7.2 and RESRAD-recycle 3.10. The dose conversion factors (DCF) for each age group (infant, 1y, 5y, 10y, 15y, adult) of the target nuclide used the values presented in ICRP-72, and in particular, geo-hydrological data of the actual landfill site was used as an input factor when evaluating landfill scenarios. As a result of the dose assessment, when landfilling concrete wastes in 2020, the personal dose and collective dose were evaluated the most at 2.80E+00 μSv/y and 4.83E-02 man·Sv/y, respectively.

Activated carbon (AC) is used for filtering organic and radioactive particles, in liquid and ventilation systems, respectively. Spent ACs (SACs) are stored till decaying to clearance level before disposal, but some SACs are found to contain C-14, a radioactive isotopes 5,730 years halflife, at a concentration greater than clearance level concentration, 1 Bq/g. However, without waste acceptance criteria (WAC) regarding SACs, SACs are not delivered for disposal at current situation. Therefore, this paper aims to perform a preliminary disposal safety examination to provide fundamental data to establish WAC regarding SACs SACs are inorganic ash composed mostly of carbon (~88%) with few other elements (S, H, O, etc.). Some of these SACs produced from NPPs are found to contain C-14 at concentration up to very-low level waste (VLLW) criteria, and few up to low-level waste (LLW) criteria. As SACs are in form of bead or pellets, dispersion may become a concern, thus requiring conditioning to be indispersible, and considering VLL soils can be disposed by packaging into soft-bags, VLL SACs can also be disposed in the same way, provided SACs are dried to meet free water requirement. But, further analysis is required to evaluate radioactive inventory before disposal. Disposability of SACs is examined based on domestic WAC’s requirement on physical and chemical characteristics. Firstly, particulate regulation would be satisfied, as commonly used ACs in filters are in size greater than 0.3 mm, which is greater than regulated particle size of 0.2 mm and below. Secondly, chelating content regulation would be satisfied, as SACs do not contain chelating chemicals. Also, cellulose, which is known to produce chelating agent (ISA), would be degraded and removed as ACs are produced by pyrolysis at 1,000°C, while thermal degradation of cellulose occurs around 350~600°C. Thirdly, ignitability regulation would be satisfied because as per 40 CFR 261.21, ignitable material is defined with ignition point below 60°C, but SACs has ignition point above 350°C. Lastly, gas generation regulation would be satisfied, as SACs being inorganic, they would be targeted for biological degradation, which is one of the main mechanism of gas generation. Therefore, SACs would be suitable to be disposed at domestic repositories, provided they are securely packaged. Further analysis would be required before disposal to determine detailed radioactive inventories and chemical contents, which also would be used to produce fundamental data to establish WAC.

At the end of 2022 there were 439 nuclear power reactors in operating around the world, including 25 nuclear power reactors of Korea. Domestic nuclear power plants (NPPs) continuously produce low and intermediate-level radioactive waste (LILW) and spent nuclear fuel (SNF). As amount of radioactive waste is increasing and interim storage facilities meet limitation of their capacity, radioactive waste need to be transported. Consequently, the demand for radioactive waste transportation is increasing and the importance of Radiation Risk Assessment Codes (RRACs) for radioactive waste transportation is also on the rise. Considering the domestic situation where all NPPs are located on seaside, the radioactive waste transportation by ship is inevitable and the its risk assessment is very important for safety. Although various researches on radioactive waste transportation risk assessment is being actively conducted, research on domestic radioactive waste maritime transportation is insufficient. In this study, MARINRAD and KM-RAD were used to review on the radioactive waste transportation risk assessment. The result of reviewing shows that MARINRAD used SNF as transporting radioactive materials and ‘SAND87-7067 (1987)’ as nuclide database, whereas KMRAD used LILW and ‘IAEA Technical Report Series-422 (2004)’. To complement these limitations, we present an modernized integrated database by updating data and covering the radioactive materials from LILW to SNF. These results are expected to contribute to the development of RRACs for domestic radioactive waste maritime transportation.

Radioactive waste is typically disposed of using standard 200 and 320 L drums based on acceptance criteria. However, there have been no cases evaluating the disposal and suitability of 200 L steel drums for RI waste disposal. There has been a lack of prior assessments regarding the disposal and suitability of 200 L steel drums for the disposal of RI waste. Radioactive waste is transported to disposal facilities after disposal in containers, where the drums are loaded and temporarily stored. Subsequently, after repackaging the disposal drums, the repackaged drums are transported to disposal facilities by vehicle or ship for permanent disposal. Disposal containers can be susceptible to damage due to impacts during transportation, handling, and loading, leading to potential damage to the radiation primer coating during loading. Additionally, disposal containers may be subject to damage from electrochemical corrosion, necessitating the enhancement of corrosion resistance. Metal composite coatings can be employed to enhance both abrasion resistance and corrosion resistance. The application of metal composite coatings to disposal containers can improve the durability and radiation shielding performance of radioactive waste disposal containers. The thickness of radioactive waste disposal containers is determined through radioactive shielding analysis during the design process. The designed disposal containers undergo structural analysis, considering loading conditions based on the disposal environment. This paper focuses on evaluating the structural improvements achieved through the implementation of metal composite coatings with the goal of enhancing corrosion and abrasion resistance.

We conducted safety assessments for the disposal of spent resin mixed waste after the removal of beta radionuclides (3H, 14C) in a landfill facility. The spent resin tank of Wolsong nuclear power plant is generated by 8:1:1 weight ratio of spent ion exchange resin, spent activated carbon and zeolite. Waste in the spent resin tank was classified as intermediate-level radioactive waste due to 14C. Other nuclides such as 60Co and 137Cs exhibit below the low-level radioactive waste criteria. The techniques for separating mixed waste and capturing 14C have been under development, with a particular focus on microwave-based methods to remove beta radionuclides (3H, 14C) from spent activated carbon and spent resin within the mixed waste. The spent resin and activated carbon within the waste mixture exhibits microwave reactivity, heated when exposed to microwaves. This technology serves as a means to remove beta isotopes within the spent resin, particularly by eliminating 14C, allowing it to meet the low-level radioactive waste criteria. Using this method, the waste mixture can meet disposal requirements through free water and 3H removal. These assessments considered the human intrusion scenarios and were carried out using the RESRAD-ONSITE code. The institutional management period after facility closure is set at 300 years, during which accidental exposures resulting from human intrusion into the disposal site are accounted for. The assessment of radiation exposure to intruders in a landfill facility included six human intrusion scenarios, such as the drilling scenario, road construction scenario, post-drilling scenario, and post-construction scenario. Among the six human intrusion scenarios considered, the most conservative assessment about annual radiation exposure was the post-drilling scenario. In this scenario, human intrusion occurs, followed by drilling and residence on the site after the institutional management period. We assumed that some of the vegetables and fruits grown in the area may originate from contaminated regions. Importantly, we confirmed that radiation doses resulting from post-institutional management period human intrusion scenarios remain below 0.1 mSv/y, thus complying with the annual dose limits for the public. This research underscores the importance of effectively managing and securing radioactive waste, with a specific focus on the safety of beta radionuclide-removed waste during long-term disposal, even in the face of potential human intrusion scenarios beyond the institutional management period.

Among nuclear power plants in the Republic of Korea, Kori Unit 1 and Wolsong Unit 1 have been permanently shut down, and Kori Unit 1 is preparing to be decommissioned. According to the decommissioning plan (DP) of Kori Unit 1, a radioactive waste processing complex will be built on the Kori site to reduce radioactive waste generated during decommissioning actively, and various types of decommissioning waste are expected to be treated in the complex. It is judged that matters related to the safety assessment of the complex are not included in the DP since the equipment and treatment processes have not been determined. IAEA GSR Part 5 states that radioactive waste processing complex shall be operated according to national regulations and the conditions imposed by the regulatory body. However, it has been confirmed that separate regulatory requirements for the complex have not yet been established in Korea. It is expected that the Regulation on Technical Standards for Nuclear Facilities, etc. will be applied mutatis mutandis. Liquid and gaseous radioactive materials can be expected to be released into the sea or atmosphere during the operation of the complex. Accordingly, it should be proved that standards such as discharge limits of radioactive effluents are met. Although the assessment of radioactive effluent discharged from nuclear power plants to the environment is systematically conducted, it has been confirmed that the safety assessment framework for radioactive effluents discharged from the complex has not yet been established. Currently, the SAFRAN Tool is based on SADRWMS (Safety Assessment Driving Radioactive Waste Management Solutions), an IAEA safety assessment methodology for pre-disposal management, which uses Pathway Dose Factors (PDFs) derived from generic environmental models. Therefore, in order to conduct a more detailed safety assessment of the complex on a specific site, site characteristic data should be reflected. Although safety assessment using the SAFRAN Tool was conducted at the Thailand Institute of Nuclear Technology (TINT) facility, detailed data were not provided, and PDFs reflecting site characteristic data were not applied. Also, no other studies that considered many types of waste and provided detailed data on the safety assessment were not confirmed. Therefore, this study developed K-CRAFT (Kyung Hee – Comprehensive RAdioactive waste treatment Facility safety assessment Tool), this tool that can derive PDFs by reflecting site characteristic data based on the SADRWMS methodology and conducted preliminary safety assessment for the complex which will be built in Kori site by this tool.

Over the years, in the field of safety assessment of geological disposal system, system-level models have been widely employed, primarily due to considerations of computational efficiency and convenience. However, system-level models have their limitations when it comes to phenomenologically simulating the complex processes occurring within disposal systems, particularly when attempting to account for the coupled processes in the near-field. Therefore, this study investigates a machine learning-based methodology for incorporating phenomenological insights into system-level safety assessment models without compromising computational efficiency. The machine learning application targeted the calculation of waste degradation rates and the estimation of radionuclide flux around the deposition holes. To develop machine learning models for both degradation rates and radionuclide flux, key influencing factors or input parameters need to be identified. Subsequently, process models capable of computing degradation rates and radionuclide flux will be established. To facilitate the generation of machine learning data encompassing a wide range of input parameter combinations, Latin-hypercube sampling will be applied. Based on the predefined scenarios and input parameters, the machine learning models will generate time-series data for the degradation rates and radionuclide flux. The time-series data can subsequently be applied to the system-level safety assessment model as a time table format. The methodology presented in this study is expected to contribute to the enhancement of system-level safety assessment models when applied.

The deep geological repository for high-level radioactive waste requires careful consideration due to its exceptionally long-term implications, making long-term impact assessments essential. However, evaluating the long-term effects of deep geological repositories using performance assessment models is accompanied by various sources of uncertainty, including uncertainties about the future, model uncertainties, and uncertainties associated with input data. These multifaceted uncertainties arise from factors such as a lack of current knowledge, contributing to a complex web of unpredictability. Managing, mitigating, and ultimately eliminating these uncertainties is crucial for ensuring the performance and safety of deep geological repositories. Currently, the Korea Radioactive Waste Agency (KORAD) is developing a complex behavior model that incorporates Thermal-Hydraulic-Mechanical-Chemical (THMC) phenomena within the disposal system using PFLOTRAN. To address model uncertainties and furthermore input data uncertainties for this intricate model, an automated sensitivity analysis system has been developed. This automated system operates without human intervention, facilitating tasks such as automatic parameter adjustments and the quantification of uncertainties. Furthermore, this system aids in identifying key factors characterized by substantial uncertainties. Through this system, it is possible to examine concentration distributions in each components of the deep disposal facility in response to changes in input data and to identify factors with significant uncertainties. The sensitivity results and key uncertainty factors obtained through this system are intended to be used for optimizing uncertainties in future research and development.

The effect of various physicochemical processes, such as seawater intrusion, on the performance of the engineered barrier should be closely analyzed to precisely assess the safety of high-level radioactive waste repository. In order to evaluate the impact of such processes on the performance of the engineered barrier, a thermal-hydrological-chemical model was developed by using COMSOL Multiphysics and PHREEQC. The coupling of two software was achieved through the application of a sequential non-iterative approach. Model verification was executed through a comparative analysis between the outcomes derived from the developed model and those obtained in prior investigations. Two data were in a good agreement, demonstrating the model is capable of simulating aqueous speciation, adsorption, precipitation, and dissolution. Using the developed model, the geochemical evolution of bentonite buffer under a general condition was simulated as a base case. The model domain consists of 0.5 m of bentonite and 49.5 m of granite. The uraninite (UO2) was assigned at the canister-bentonite interface as the potential source of uranium. Assuming the lifetime of canister as 1,000 years, the porewater mixing without uranium leakage was simulated for 1,000 years. After then, the uranium leakage through the dissolution of uraninite was initiated and simulated for additional 1,000 years. In the base case model, where the porewater mixing between the bentonite and granite was the only considered process, the gypsum tended to dissolve throughout the bentonite, while it precipitated in the vicinity of bentonite-granite boundary. However, the precipitation and dissolution of gypsum only showed a limited effect on the performance of the bentonite. Due to the low solubility of uraninite in the reduced environment, only infinitesimal amounts of uranium dissolved and transported through the bentonite. Additional cases considering various environmental processes, such as seawater or cement porewater intrusion, will be further investigated.

The post-closure safety assessment of a repository is typically conducted over an extensive timescale from ten thousand to a million years. Considering that biosphere ecosystems may undergo significant changes over such lengthy periods, it is essential to incorporate the long-term evolution of the biosphere into the safety assessment. Climate change and landscape development are identified as critical drivers with the potential to impact the hydrogeological and hydrogeochemical characteristics of the biosphere. These changes can subsequently alter the migration patterns of radionuclides through the biosphere and influence human exposure doses. Therefore, this study formulates scenarios within the context of long-term biosphere evolution. We examine biosphere assessment processes employed in other countries and conduct a comparative study on scenario conditions. For example, biosphere assessment in Finland has identified sea-level changes and land-use alterations as significant factors in the long-term evolution of the biosphere. These factors are linked to Features, Events, and Processes (FEPs) associated with climate change and human activities. Sea-level changes are related to FEPs regarding climate change, land uplift, and shoreline displacement, while land-use changes are based on human activity-related FEPs (e.g., crop type, livestock and forest management, well construction, and demographics). Based on the literature review, this study has configured long-term evolution scenarios for the safety assessment of a deep geological repository for spent fuels.

The Korea Atomic Energy Research Institute (KAERI) is currently developing a process-based performance assessment model known as APro. Distinguished from the previous system-level safety assessment model developed by KAERI, APro exhibits the capacity to encompass a threedimensional biosphere domain, evolving over the long term. In this study, we elucidate the methodology employed in developing the dose assessment module of APro and present the module’s functionalities. The procedural steps underlying radiation dose calculations within the APro framework can be succinctly outlined as follows: 1) Definition of a landscape model, utilizing information derived from a specified snapshot period provided by the APro biosphere transport module; 2) Generation of unit biotope objects spanning the landscape; 3) Evaluation of radionuclide transfer within the soil medium; 4) Calculation of activity concentration for flora and fauna groups; 5) Assessment of the distribution of effective dose among representative human groups; 6) Progressing through successive time steps. The APro dose calculation module exhibits notable capabilities that encompass: 1) Accounting for radionuclide decay and ingrowth; 2) Facilitating transfer through unsaturated porous media; 3) Considering sorption effects; 4) Addressing the inheritance of radioactivity between various landscape models; 5) Offering customizable ecosystem parameters; 6) Providing flexibility for user-defined exposure pathways. Leveraging these functionalities of the dose assessment module, APro is proficient in evaluating the distribution of radiological doses and associated risks for representative population groups, all while accounting for the dynamic, long-term evolution of the biosphere, including alterations in land cover.

Since the first operation of the Gori No. 1 nuclear power plant in Korea was started to operate in 1978, currently 24 nuclear power plants have been being operated, out of which 21 plants are PWR types and the rest are CANDU types. About 30% of total electricity consumed in Korea is from all these nuclear power plants. The accumulated spent nuclear fuels (SFs) generated from each site are temporarily being stored as wet or dry storage type at each plant site. These SFs with their high radiotoxicity, heat generating, and long-lived radioactivity are actually the only type of high-level radioactive waste (HLW) in Korea, which urgently requires to be disposed of in deep geological repository. Studies on disposal of HLW in various kind of geological repositories have been carried out in such countries as Sweden, Finland, United States, and etc. with their own methodologies and management policies in consideration of their situations. In Korea long-term R&D research program for safe management of SF has also been conducted during last couple of decades since around 1997, during which several various alternative type of disposal concepts for disposal of SNFs in deep geological formations have been investigated and developed. The first concept developed was KAERI Reference Disposal System (KRS) which is actually very much similar to Swedish KBS-3, a famous concept of direct disposal of SF in stable crystalline rock at a depth of around 500 m which has been regarded as one of the most plausible method worldwide. The world first Finnish repository which is expected to begin to operate sooner or later will be also this type. Since the characteristics of SF discharged from domestic nuclear reactors have been changed and improved, and burnup has sometimes increased, a more advanced deep geological repository system has been needed, KRS-HB (KRS with High Burnup SF) has been developed and in consideration of the dimensions of SNFs and the cooling period at the time point of the disposal time, KRS+, a rather improved disposal concept has also been subsequently developed which is especially focused on the efficient disposal area. Recently research has concentrated on rather advanced disposal technology focused on a safer and more economical repository system in recent view of the rapidly growing amount of accumulated SF. Especially in Korea the rock mass and the footprint area for the repository extremely limited for disposal site. Some preliminary studies to achieve rather higher efficiency repository concept for disposal of SF recently have already been emphasized. Among many possible ones for consideration of design for high-efficiency repository system, a double-layered system has been focused which is expected to maximize disposal capacity within the minimum footprint disposal area. Based on such disposal strategy a rather newly designed performance assessment methodology might be required to show long-term safety of the repository. Through the study some prerequisites for such methodological development has been being roughly checked and investigated, which covers FEP identification and pathway and scenario analyses as well as preliminary conceptual modeling for the nuclide release and transport in nearfield, far-field, and even biosphere in and around the conceptual repository system. Through the study such scenarios and models has been implemented to development of a safety assessment by utilizing GoldSim development tool for a rough quantitative comparison with existing disposal options and simple illustration purpose as well as for showing how to develop and implementation of the model to GoldSim templet.

After the Fukushima disaster, overseas nuclear power plants have established conditions for issuing a red alert in the event of fuel damage within the spent fuel pool and they have already implemented conditions for issuing a blue alert when fuel is exposed above the water surface. In South Korean nuclear power plants, a real-time monitoring system is in place to oversee the exposure of spent fuel to the surface within the spent fuel pool. To achieve this, a water level indicator gauge is installed within the spent fuel pool, allowing for continuous real-time monitoring. This paper conducted a comparative assessment of radiation levels from water level monitoring system in two units’ spent fuel pools based on the low water levels (1 feet from the storage rack), utilizing the radiation analysis code (MCNP).

In Korea, Kori Unit 1 and Wolsong Unit 1, have been permanently shut down in 2017 and 2019, and more nuclear power plants are expected to be permanently shut down after continued operation successively. Spent fuel has been generated during operation and stored in spent fuel pools. Due to the expected saturation of spent fuel pools within the next several decades, transportation of a huge amount of spent fuel is anticipated to interim storage facilities or final disposal facilities, even though the specific location is not decided. The U.S. Nuclear Regulatory Commission (NRC) states that every environmental report prepared for the licensing stage of a Pressurized Water Reactor shall contain a statement concerning risk during the transportation of fuel and radioactive wastes to and from the reactor. Thus, the licensee should ensure that the radiological effects in accidents, as well as normal conditions in transport, do not exceed certain criteria or be small if cannot be numerically quantified. Specific conditions that a full description and detailed analysis of the environmental effects of transportation of fuel and wastes to and from the reactor are exempted are specified in 10 CFR Part 51. Since there are no official requirements for radiological dose assessment for workers and public during the transportation of spent fuel in Korea, the margin when applying the U.S. regulatory criteria to the environmental impact assessment during the transport of spent fuel generated from domestic nuclear power plants is evaluated. A different approach would be needed due to the difference in the characteristics of spent fuel and geographical features.

This study proposes a methodology for the regional seismic risk assessment of structural damage to buildings in Korea based on evaluating individual buildings, considering inconsistency between the administrative district border and grid lines to define seismic hazard. The accuracy of seismic hazards was enhanced by subdividing the current 2km-sized grids into ones with a smaller size. Considering the enhancement of the Korean seismic design code in 2005, existing seismic fragility functions for seismically designed buildings are revised by modifying the capacity spectrum according to the changes in seismic design load. A seismic risk index in building damage is defined using the total damaged floor area considering building size differences. The proposed seismic risk index was calculated for buildings in 29 administrative districts in 'A' city in Korea to validate the proposed assessment algorithm and risk index. In the validation procedure, sensitivity analysis was performed on the grid size, quantitative building damage measure, and seismic fragility function update.

With the advancement and diversification of the bread industry, eco-friendly products with less sugar and salt, and containing functional ingredients are being developed. To develop healthy bread, Korean pine leaf powder was added in different proportions (0%, 1%, 3%, 5%, and 7%), and the quality characteristics of the bread, namely height, moisture, color value, texture, antioxidant property, and sensory characteristics were evaluated. As the amount of leaf powder was increased in the bread, L-value in the range of 53.45~85.05 (p<0.001) and adhesiveness in the range of 0.13~0.32 mJ (p<0.001) decreased significantly, whereas b-value in the range of 16.75~30.74 (p<0.001), total polyphenol content in the range of 466.83~669.13 ug/mL, ABTS- in the range of 0.46~43.23%, DPPH-radical in the range of 1.39~45.76%, scavenging capacities (p<0.001), color in the range of 3.27~5.40 (p=0.017) and texture in the range of 4.33~4.80 (p=0.006) preferences increased significantly. This study could increase the utilization of Korean pine leaf and the production of healthy food with antioxidant properties.

As aerial application increasing, with social concerning in pesticide drift rises, so this study attempts to establish a test bench that can repeatedly and continuously evaluate this. To this end, this study first analyze ISO 22866 and ASABE S561.1 among the international standard test methods related to pesticide fugitive evaluation. A test bench was established at the Naju practice field of Chonnam National University in accordance with international standards, and field tests were carried out (ISO 22866, ASABE S561.1) to verify effectiveness. A test bench that established in this study and a pesticide drift recovery protocol by aerial application can improve the experimental environment where field experiments were complex and it was difficult to achieve the same conditions. In addition, it will be possible to construct a database of pesticide drift that takes into account various factors that affect pesticide drift substances, which is expected to improve the reliability of the data, as well as quantitative evaluation of pesticide drift in the air.

본 연구는 강원도 강릉시에 위치한 하시동·안인사구 생태경관보전지역에서의 생태계서비스 평가와 증진방안 마련을 위하여 시행되었다. 연구방법으로 신속평가 도구를 이용한 생태계서비스 평가를 바탕으로 환경지속성지수 분석하였고, SWOT 분석 을 통하여 생태계서비스 증진방안을 마련하였다. 하시동·안인사구 생태경관보전지역의 생태계서비스 평가 결과를 바탕으로 분석한 환경지속성지수는 조절서비스, 문화서비스, 지지서비스 모두 50% 미만으로 낮게 평가되었다. 특히 문화서비스, 지지서 비스가 부족한 것으로 나타났다. 이러한 결과를 바탕으로 하시동·안인사구 생태경관보전지역의 생태계서비스 증진 방안을 마련하기 위하여 SWOT 분석을 시행하였다. 강점을 기회로 활용(SO전략), 강점을 이용한 위협요인 최소화(ST전략), 강점을 보완하기 위하여 기회를 활용(WO전략), 약점을 보완하고 위협을 최소화(WT전략)하는 생태계서비스 증진방안 6가지를 도출 하였다. 향후 하시동·안인사구 생태경관보전지역에서 생태계서비스 증진사업을 추진할 때 현재 훼손된 지역의 복원과 향후 침식 등으로 인한 피해 방지 등 제시한 문제를 극복하고 이를 통하여 생태계서비스를 증진시켜 하시동·안인사구 생태경관보전 지역의 가치를 높일 필요가 있다.