This research explores how imported automobile companies can develop their strategies to improve the outcome of their recalls. For this, the researchers analyzed patterns of recall demand, classified recall types based on the demand patterns and examined response strategies, considering plans on how to procure parts and induce customers to visit workshops, recall execution capacity and costs. As a result, recalls are classified into four types: U-type, reverse U-type, L- type and reverse L-type. Also, as determinants of the types, the following factors are further categorized into four types and 12 sub-types of recalls: the height of maximum demand, which indicates the volatility of recall demand; the number of peaks, which are the patterns of demand variations; and the tail length of the demand curve, which indicates the speed of recalls. The classification resulted in the following: L-type, or customer-driven recall, is the most common type of recalls, taking up 25 out of the total 36 cases, followed by five U-type, four reverse L-type, and two reverse U-type cases. Prior studies show that the types of recalls are determined by factors influencing recall execution rates: severity, the number of cars to be recalled, recall execution rate, government policies, time since model launch, and recall costs, etc. As a component demand forecast model for automobile recalls, this study estimated the ARIMA model. ARIMA models were shown in three models: ARIMA (1,0,0), ARIMA (0,0,1) and ARIMA (0,0,0). These all three ARIMA models appear to be significant for all recall patterns, indicating that the ARIMA model is very valid as a predictive model for car recall patterns. Based on the classification of recall types, we drew some strategic implications for recall response according to types of recalls. The conclusion section of this research suggests the implications for several aspects: how to improve the recall outcome (execution rate), customer satisfaction, brand image, recall costs, and response to the regulatory authority.

인간의 편의 향상과 경제성을 앞세운 중국은 수십 년 전부터 도시개발에 대한 환경오염, 도시 외곽지역 재개발 등의 문제가 끊임없이 논의되어 왔다. 이러한 녹지단절이나 종 다양성의 문제를 방지하기 위해 광역적 생태 네트워크가 요구되어지며 공간변동의 파악이 필요하다고 사료된다. 따라서 본 연구에서는 도시 확산이 빠르게 진행되고 있는 중국 중남부지역 ‘녹심’이라는 대도시권 녹지공간을 중심으로 토지피복도 및 경관 생태지수를 이용하여 시공간적 패턴변화와 경관다양성을 분석하고자 하였다. 1978-2019년의 Landsat 위성사진을 이용하여 ENVI 5.3과 ArcGIS 10.2를 통해 시계열의 경관요소를 유형화하였다. 경관 구조적·기능적 측면에서 객관적인 정량화하는 방법으로 FRAGSTATS를 통하여 경관지수를 정량화하여 산출하였다. 연구결과 1)이 지역의 경관은 1978년부터 오랜기간 토지변화에 따라 자연스럽게 형성되었고, 2)1989-2009년에는 택지개발이나 도로건설에 의해 주로 산림패턴에서 심각하게 파편화를 규명하였으며, 3)1999년 이후 시가지역의 경관지수에 따라 더욱 단순해지고 안정된 상태를 보였다. 4)수역이나 나지의 패치고립도가 높게 나타나고, 경관다양성에 부정적인 영향을 초래하였다. 5)2009년 이후 녹심계획과 함께 경관패턴은 전반적으로 규칙성이 있고 정형화되었다. 이와 같은 생태경관의 가치를 회복하는 것이 지속가능한 도시권 환경을 보전하는 데 가장 바람직할 것이며, 본 연구는 향후 녹심지역에 지속적으로 발전할 수 있는 매우 중요한 기초자료로 기대된다.

Laser induced surface activation (LISA) technology requires refined selection of process variables to fabricate conductive microcircuits on a general polymer material. Among the process variables, laser mode is one of the crucial factors to make a reliable conductor pattern. Here we compare the continuous wave (CW) laser mode with the pulse wave (PW) laser mode through determination of the surface roughness and circuit accuracy. In the CW laser mode, the surface roughness is pronounced during the implementation of the conductive circuit, which results in uneven plating. In the PW laser mode, the surface is relatively smooth and uniform, and the formed conductive circuit layer has few defects with excellent adhesion to the polymer material. As a result of a change of laser mode from CW to PW, the value of Ra of the polymer material decreases from 0.6 m to 0.2 m; the value of Ra after the plating process decreases from 0.8 m to 0.4 m, and a tight bonding force between the polymer source material and the conductive copper plating layer is achieved. In conclusion, this study shows that the PW laser process yields an excellent conductive circuit on a polymeric material.

Background: Weakness of the trunk muscles decreases the trunk control ability of stroke patients, which is significantly related to balance and gait. Objectives: To compare the impact of diagonal pattern self-exercise on an unstable surface and a stable surface for trunk rehabilitation on trunk control, balance, and gait ability in stroke patients. Design: Nonequivalent control group design. Methods: Twenty four participants were randomized into the experimental group (diagonal pattern self-exercise while sitting on an unstable surface, n=12) and the control group (diagonal pattern self-exercise while sitting on a stable surface, n=12). All interventions were conducted for 30 minutes, three times a week for four weeks, and the trunk impairment scale (TIS), berg balance scale (BBS), functional gait assessment (FGA), and G-walk were measured. Results: All groups indicated significant increases in all variables (TIS, BBS, FGA, cadence, speed, stride length) after four weeks. The TIS, BBS, FGA, cadence, gait speed, and stride length group-by-time were significantly different between the two groups. Conclusion: We found that, in stroke patients, diagonal pattern self-exercise on an unstable surface is a more effective method for improving trunk control, balance, and gait ability than diagonal pattern self-exercise on a stable surface.

This study was performed to provide fundamental data on the convenience foods purchase according to the food-related lifestyle. This study was conducted on 398 Chinese international students residing in Gyeonggi area between October and December 2019. Among the total 373 survey subjects, gender was 183 male students (49.1%) and 190 female students (50.9%). This study was conducted by questionnaire method with reference to previous studies. There are significant differences in economic pursuit and taste pursuit for delivery food use, economic pursuit and taste pursuit for delivery food information, health pursuit and taste pursuit in delivery food ordering method, and economic pursuit and convenience pursuit for delivery food use (p<0.05). Delivery food usage time was significantly different in convenience pursuit, health pursuit, eating out pursuit, and taste pursuit (p<0.05), and the delivery food preference menu was significantly different in economic pursuit, health pursuit, eating out pursuit, and taste pursuit (p<0.05). The menu positive factors among satisfaction factors showed statistically significant differences in economic pursuit (β=0.188, t=3.531) and health pursuit (β=0.160, t=3.099) among food related lifestyle factors. In conclusion, this study presented the desirable direction of delivery food usage in Chinese students.

MDPS control has been a difficult problem for the past two decades. Though there are many ways to control steering feeling, the MDPS control logic is still being upgraded or developed for steering feel improvement. A new point of view in MDPS is proposed by evolution logic, which is a new driver friendly improvement based on the analysis of driver’s driving pattern. As a result of the application of evolution logic, this paper shows that drivers behaviour effecting factors among MDPS parameters will efficiently lead to customers’ satisfaction.

An ecological study for species composition and abundance of the fish assemblages in the coastal waters of Gujora and Mangchi of Geoje, Korea was conducted using monthly larval collection by an RN80 net from June, 2018 to May, 2019. A total of the 5 Orders, 15 Families, 21 species were collected. The dominant species were Ammodytes japonicus and Engraulis japonicas. Gobiidae was the most dominant species in June, Spratelloides gracilis in July, Chelidonichthys sp. in August, Gobiidae in September, Repomucenus beniteguri in October, Sebastiscus marmoratus in November, Sebastiscus marmoratus and Hexagrammos otakii in December of 2018, Pleuronectes yokohamae in January, Ammodytes japonicus in Febraury, Engraulis japonicus in March, Sebastes sp. and Gobiidae in April and Engraulis japonicus in May of 2019. The highest number of species and individuals were found in July and the smallest in August. Thus, the diversity index was the highest in July and the lowest in August. As a result of the similarity by month was divided into Group I in January and February and Group II in April, June and September. The most dominant species in the Group I were the Ammodytes japonicus and Sebastes inermis, and the most dominant species in the Group II was Gobiidae.

중국산과 국내산 홍삼 농축액의 혼합비율에 따는 원산지 판별 가능성을 검토하기 위해 전자코를 이용하여 향기 패턴을 분석하였다. 중국산 홍삼 농축액과 국내산 홍삼 농축액의 원산지 판별이 가능하였고 중국산 홍삼농축액의 혼합비율이 증가할수록 검출되어지는 향기 성분의 패턴은 감소하는 경향을 나타내었다. Frequency pattern, derivative pattern을 Vapor printTM 으로 도형화 하여 비교한 결과 서로 다 른 패턴을 보여주어 중국산 홍삼 농축액 첨가비율에 따른 차이는 물론 원산지의 차이도 뚜렷하게 나타났다.

The aim of this study to provide basic reference data for the development of video contents used in pattern drafting education and to explore the possibility of utilizing YouTube videos in such education. Subject videos were selected using the number of views. A total of 596 videos and 28 channels were analyzed for the period July to September 2019 and the results are as follows. With regard to content, there were 27 pattern drafting items, the majority being dress, pants, skirt, blouse and sleeve drafting, although high-level content such as cowl, bustier, corset patterns were also available. Therefore, there is a high likelihood that YouTube videos could be used as educational material, especially as supplementary references to provide specific examples and easy explanations for difficult concepts or method, for students majoring in this field. However, as most videos currently focus on a few items, expanding video content to features a wider variety of clothing items at different levels is necessary. With regard to video length, it mostly ranged from 10 to 15 minutes. It is not advisable to create lengthy lecture-style videos expounding on different principles or variations in pattern drafting when developing educational video material.

본 연구는 2005년부터 2018년까지 14년간 주암호에서 출현한 남조류의 천이 양상을 분석하여, 남조류에 영향을 미친 주요 환경요인과의 관계를 파악하고자 연구를 수행하였다. 특히 2012년 이후 유해남조류 (Harmful algae) 출현량 급감의 원인을 파악하고자 하였다. 조사기간 동안 두 지점의 유해남조류 현존량은 주암댐: 10~24,891 cells mL-1, 신평: 13~26,043 cells mL-1의 범위로 출현하였다. 전반기 시기 두 지점의 평균 현존량은 각각 2,575 cells mL-1, 2,557 cells mL-1로, 이는 후반기 시기 평균 현존량 (42 cells mL- 1, 82 cells mL-1)에 비해 약 60배, 30배의 큰 세포수 차이를 보였다. 남조류가 상대적으로 많이 출현하는 여름 시기 (6~9월)를 대상으로 상관분석을 실시한 결과, 유해남조류는 TN, 방류량, 저수량과 양의 상관관계를 보였고, 전기전도도와는 음의 상관관계를 보였다. t-검정 결과 TN, EC, 체류시간의 유의미한 차이를 확인하였다. 특히 TN은 0.566~1.292 mg L-1의 범위로 평균 0.862 mg L-1로 보였다. 전반기, 후반기 평균 TN은 전반기 0.912 mg L-1, 후반기 0.811 mg L-1로 감소하였다. 또한 유의확률은 다소 떨어지지만, TP의 경우 평균 차이는 없으나 표준편차가 비교적 큰 차이를 보여 변동성이 큼을 알 수 있었다. 강우량이 집중된 여름 (6~9월) 시기의 전반기와 후반기 강우량 감소하는 패턴이 원인인 것으로 판단된다 (전반기 263.3 mm, 후반기 219.9 mm). 즉, 전반기에 비해 강우량은 감소 하였으며, 이로 인해 TP의 변동성이 감소되었다고 판단된다. TP의 변동성의 감소로 인해 전반기에 남조류의 luxury consumption이 가능하여 남조류의 성장률이 높았을 것으로 추측된다. 따라서 주암호 유해남조류 감소 원인은 강우량의 감소로 인한 영양염의 감소 (TN) 및 변동성의 감소 (TP)의 결과로 사료된다.

미국선녀벌레(Metcalfa pruinosa)는 2009년 국내에 최초로 보고된 이후 남부지역 단감 과원을 중심으로 다양한 농작물에 경제적 피해를 야기한다. 미국선녀벌레는 기주 범위가 넓고 다양하여 농경지뿐 아니라 산림지역에도 존재하여 과수원 인근 산림에서 농경지로 유입되는 개체로 인하여 효율적인 방제를 위한 시간적, 공간적 범위를 결정하는데 어려움이 많다. 본 연구에서는 투명 점착트랩을 이용하여 단감원에서 미국선녀벌 레의 발생 양상과 유입 및 유출 경향을 조사하였고, SADIE(Spatial Analysis by Distance Indices)를 사용하여 공간분포를 조사하였다. 또한 조사 시점간 공간분포의 상관관계를 분석하여, 분포의 패턴의 변화하는 시점들을 확인하였다. 단감원에서 미국선녀벌레의 발생 최성기는 5월 중 순과 8월 중순으로 5월에는 약충이, 8월에는 성충이 발견되었다. 10월 이후에는 발견되지 않았다. 5월 중하순경 부화한 약충은 임의분포 하였으나 포장 외부로 분산한 후 집중 분포하는 패턴을 보였다. 성충은 다시 포장으로 유입된 후 임의분포하였다. 트랩 높이별 채집 정도는 약충기에는 상대적으로 아래쪽 트랩에서, 성충기에는 위쪽 트랩에서 많이 채집되었다. 이러한 경향성은 포장 내부와 주변부의 밀도 변화에서도 확인할 수 있 었고, 포장 내 단감에서의 미국선녀벌레 실제 밀도와도 매우 유사한 경향을 보였다.