일반 소형 형광등(Compact Florescent Lamp; CFL)(20W기준)에는 약 10%의 철금속(ferrous metal)이 존재한다. 철금속은 ‘리사이클링에 의한 생산량’ 을 ‘광석에 의한 생산량’ 으로 나눈 값인 리사이클링강도가 0.84로 타소재 알루미늄 0.39, 구리 0.08, 티타늄 0.02인 데 비해 압도적으로 높으며 철금속을 재활용하면 광물로부터 직접 철금속을 만드는 공정에 비해 이산화탄소 82%, 질소산화물 88.9%, 황산화물 94.7%을 줄일 수 있다. 또한 자연을 비교적 적게 파괴하면서도 쓰레기를 거의 남기지 않는 친환경적인 소재로 다른 소재 대신 철금속을 사용하면 사용할수록 환경보존에 도움이 되며 재활용도 용이해 경제성이 매우 뛰어나다. 본 연구는 폐형광등의 재활용 과정의 일부인 자력을 이용하여 자성물질인 철금속을 선별 및 회수 목적으로 자력 선별기를 개발하는 것이다. 수은이 제거된 폐소형 형광등(CFL)을 자력 선별기에 투입한 후 자력을 이용해 물리적으로 철금속을 단시간에 효과적으로 선별 및 회수할 수 있는 방법이다. 본 연구에서는 자력 선별기에 의한 시료의 투입속도에 따른 철금속의 선별 및 회수를 모니터링 하여 자력선별기의 선별효율을 평가하고자 하였다.

We have experienced cracking around column bottom and safety check places on a bridge due to lamp post shaken by traffic and wind. So we need to take a measure to decrease stress on lamp post by suppressing vibration. In this study, We have tested how much we can reduce the stress by using an anti vibration damper.

Soybean mosaic virus (SMV) is a prevalent pathogen that causes significant yield reduction in soybean production worldwide. SMV belongs to potyvirus and causes typical symptoms such as mild mosaic, mosaic and lethal necrosis. SMV is seed-borne and also transmitted by aphid. Eleven SMV strains, G1 to G7, G5H, G6H, G7H, and G7a were reported in soybean varieties in Korea. A reverse transcription loop-mediated isothermal amplification (RT-LAMP) method allowed one-step detection of gene amplification by simple procedure and needed only a simple incubator for isothermal template. This RT-LAMP method allowed direct detection of RNA from virus-infected plants without thermal cycling and gel electrophoresis. In this study, we designed RT-LAMP primers named SML-F3/B3/FIP/BIP from coat protein gene sequence of SMV. After the reaction of RT-LAMP, products were identified by electrophoresis and with the detective fluorescent dye, SYBR Green I. under daylight and UV light. Opmtimal reaction condition was at 58℃ for 60min and the primers of RT-LAMP showed the specificity for nine SMV strains tested in this study.

Mercury distribution and hazardous characteristics of major components from SCFLs (Spent compact fluorescent lamps)for 3 lamp manufactures (A, B, C) are estimated by the analysis of mercury concentration and leaching tests such asKorean Extraction Test (KET) and Toxicity Characteristic Leaching Procedure (TCLP). SCFLs can be separated into glasstube, phosphor powder, metals, ballast, plastics, and binder. Through the analysis of mercury in major components forSCFL, mercury concentration in phosphor powder is much higher than that in other components regardless manufacturesof lamp. Also, mercury concentration in phosphor powder is dependent of the manufactures of lamp. From the leachingtests, all components except phosphor powder from 3 lamp manufactures are verified to be non-hazardous waste becauseall leaching concentrations are below the regulatory level. However, the leaching concentration of mercury in phosphorpowder of SCFLs is higher than the regulatory level in both KET and TCLP regardless manufactures of lamp. Hence,phosphor powder should be managed as a hazardous waste and should be separately managed to control mercury.

Compact fluorescent lamps are strongly encouraged to manage separately in Korea because Compact fluorescent lamps contain mercury. Compact fluorescent lamps have managed as household waste in Korea, however, even though Compact fluorescent lamps contains hazardous material such as mercury. The aim of management of Compact fluorescent lamps separately is to reduce the release of mercury from Compact fluorescent lamp lamps into the environment and to reuse of the glass, metals and other components of Compact fluorescent lamps. The amount of mercury in a fluorescent lamps varies, depending on the type of lamp and manufacturer, but typically ranges between 5 milligrams and 30 milligrams. The mercury content of fluorescent lamps has been reported to be between 0.72 and 115 mg/lamp with an average mercury content of about 30 mg/lamp in 1994. Although manufacturers have greatly reduced the amount of mercury used in fluorescent lamps over the past 20years, mercury is an essential component to fluorescent lamps and can’t be eliminated completely in lamps. In the crushing process, CFL(compact fluorescent lamp) is separated into glass, plastic, ballast, phosphor powder and vapor. Using the crushing technique, concentration of mercury vapor emission from CFL is evaluated. Through the experiments, the efficiency of the crushing and separation for the unit is estimated by measuring the volume of CFL. In this study, the concentration of mercury is analyzed by MVI(Mercury Vapor Indicator) method for vapor in CFL. From the results of mercury distribution for 3 companies, the concentration of mercury in compact fluorescent lamp is less than that in the other type lamps. And phosphor powder has greater than 99% of total mercury amount in CFL and the mercury concentration in phosphor powder is measured between 1,008ppm and 1,349ppm. The mercury concentration in phosphor powder can be changed by the type of company and period of usage. KET and TCLP are carried out for phosphor powder, glass, plastic, ballast and base cap to estimate the hazardous characteristic. From the results of KET and TCLP test for CFL, phosphor powder from CFL should be controlled separately by stabilization or other methods to reuse as a renewable material because the phosphor powder is determined as a hazardous waste. From the results of characteristics of CFL, the carbonization system of CFL should be carried out in the temperature of less than 350℃. The amount of mercury in a fluorescent lamps varies, depending on the type of lamp and manufacturer, but typically ranges between 5 milligrams and 30 milligrams. The mercury content of Compact fluorescent lamps has been reported to be between 0.72 and 115 mg/lamp with an average mercury content of about 30 mg/lamp in 1994. Although manufacturers have greatly reduced the amount of mercury used in fluorescent lamps over the past 20years, mercury is an essential component to fluorescent lamps and can’t be eliminated completely in lamps. In Korea, demonstration for recycling of U type lamps had once begun in the area of Seoul Metropolitan, 2000. In 2004, U type lamps was included as an item in EPR(Extended Producer Responsibility) system. According to Korea Lighting Recycling Association, approximately 38 million Compact fluorescent lamps were recycled in Korea, 2011 because 3 recycling facilities for Compact fluorescent lamps are operated in Korea. Recycling rate of Compact fluorescent lamps in Korea is about 31.0% but about 70% of Compact fluorescent lamps may not manage properly. Hence, discarded lamps release approximately 2 to 3 tons of mercury per year into the environment[6]. In USA, Compact fluorescent lamps has controlled by Universal Waste Rule and merchandises containing mercury prohibited to produce. Also, MEBA(Mercury Export Ban Act) is activated in USA from 2013. According to Association of Lighting and Mercury Recycler, member companies accomplish about 85% of the lamp recycling done each year. In Germany, best available technology (BAT) system for recycling of Compact fluorescent lamps is established and about 20 companies are involved in recycling of Compact fluorescent lamps. In 1994, approximately 70-80% of total Compact fluorescent lamps are recycled in 1994 and Compact fluorescent lamps was included as an item in EPR(Extended Producer Responsibility) system in 1996. In Sweden, MRT System, which was developed by Lumalampan, separated mercury from Compact fluorescent lamps by distillation operation, 1979. Reverse route collection system is active to improve the collection of Compact fluorescent lamps. Compact fluorescent lamps was included as an item in EPR(Extended Producer Responsibility) system in 2001. In Austria, about 40 companies are involved in recycling of Compact fluorescent lamps to recycle glass and ferrous metals. And wastes containing mercury are treated in landfill site by using special container [7,8]. In this study, Compact fluorescent lamps is cut by a end-cutting unit with a cam crusher and base-cap is separated from glass part. In the end-cutting unit, a vacuum system is operating to collect mercury vapor to prevent leaking from the end-cutting unit. First of all, characteristics and major composition of Compact fluorescent lamps are estimated. Through the experiments, it is measured mercury concentration in the parts of Compact fluorescent lamps such as glass tube, phosphor powder, and base cap after separation in the end-cutting unit. Also, it is evaluated mercury emission from Compact fluorescent lamps by measuring the concentration of effluent gas in the end-cutting unit with changing flow rate. Finally, Korea Extraction Method (KET) and TCLP(Toxicity Characteristic Leaching Procedure) test are applied to phosphor powder to verify that phosphor powder is a hazardous waste [9].

The estimated that 114 million units of fluorescent lamp are sold every year, and that 70% or more spent fluorescent lamps (SFLs) are generated at business sites. According to Korea Lighting Recycling Corporation, recycled amount of SFLs selected as EPR (Extended Producer Responsibility) items from 2004 has been improved from 35,250,000 units in 2010 to 37,950,000 units in 2011, which recorded the greatest amount. Based on the year 2011, SFLs have been recycled by 31.5%, but their recycled rate is insufficient yet, compared to the recycling rate of metal cans or glass bottles, which are about 80%. The base cap of SFLs as a raw material was used in this experiment. Base cap contains an insulation sieve plate, aluminum cap, copper terminal, tempered glass, filament, and copper/iron mixed wire that goes through this glass. In order to protect a filament that is made up of tungsten for the electricity to flow, circular plate consisted of iron encloses the filament. Separating apparatus of SFL base cap used in this experiment is a device which has used impact crushing technique using hammer, screen separation and magnetic separation for the purpose of recovering aluminum, copper and iron contained in SFL. Impact hammer crusher, a device that separates aluminum from other materials by hammer impaction on the base cap that is separated by end-cutting, causes a significant reduction for other materials to be included in the collectible materials by separating aluminum, copper and iron from the base cap by using hammer crusher at 3 stages. Iron was collected by using a magnetic separation unit and the collectible materials were separated into aluminum with larger particles, and glass and other materials with smaller particles by screen separation. The separation performance was estimated for the 3 stages of hammer crusher unit to recover aluminum from the base-cap of SFLs and the separation performances are 94% at the 1st stage, 97% at the 2nd stage, and 98% at the 3rd stage, respectively.

Linear type SFL (spent fluorescent lamp) can be classified by 3-banded lamp and general lamp. Linear type SFL is separated by the end-cutting technique to examine the distribution of mercury in the major components such as base cap, glass part and phosphor powder. In this study, the concentration of mercury is analyzed by DMA (Direct Mercury Analysis) method for major components in linear type SFL. From the results of mercury distribution for 3 companies, the concentration of mercury in 3-banded lamp is less than that in general lamp. And phosphor powder has greater than 80% of total mercury amount in SFL and the mercury concentration in phosphor powder is measured between 1,250 ppm and 1,740 ppm. The mercury concentration in phosphor powder can be changed by the type of lamp, company, and period of usage. KET and TCLP are carried out for phosphor powder, glass, and base cap to estimate the hazardous characteristic. From the results of KET and TCLP test for general lamp and 3-banded lamp, phosphor powder from general lamp and 3-banded lamp should be controlled separately by stabilization or other methods to reuse as a renewable material because the phosphor powder is determined as a hazardous waste.

Diethyl phthalate (DEP) is widely spread in the natural environment as an endocrine disruption chemicals (EDs). Therefore, in this study, ultrasound (US) and ultraviolet (UVC), including various applied power density (10-40 W/L), UV wavelengths (365 nm, 254 nm and 185 nm) and frequencies (283 kHz, 935 kHz) were applied to a DEP contaminated solution. The pseudo-first order degradation rate constants were in the order of 10-1 to 10-4 min-1 depending on the processes. Photolytic and sonophotolytic DEP degradation rate also were high at shortest UV wavelength (VUV) due to the higher energy of photons, higher molar absorption coefficient of DEP and increased hydroxyl radical generation from homolysis of water. Sonolytic DEP degradation rate increased with increase of applied input power and the dominant reaction mechanism of DEP in sonolysis was estimated as hydroxyl radical reaction by the addition of t-BuOH, which is a common hydroxyl radical scavenger. Moreover, synergistic effect of were also observed for sonophotolytic degradation with various UV irradiation.

Most lamp units at ceilings, walls, and streets are static and no automatic motion capabilities are available at all to adjust lamp tilting angles and its zooming position. This paper proposes a new robotic lamp that creates three degrees of freedom (DOF) motion by using a spherical-type parallel mechanism with a unique forward kinematic position. In the robotic lamp, three motors are placed at the base frame to control two tilting angles and one zoom in-and-out motion for a localized light. The kinematic model of this device is derived and the proto type has been developed. The performance of this device was verified through experiment.