In experimental results, the prediction equation for 28 day-strength of GGBF slag concrete could be produced through the linear regression analysis of early strength and 28 day-strength. In order to acquire the reliability, all mixture were repeated as 3 times and each mixture order was carried out by random sampling. The prediction equation for 28 day-strength of GGBF slag concrete by 1 day strength won the good reliability.

본 연구는 혼합 활성화제에 의한 알칼리 활성화 슬래그 시멘트(AASC)의 역학적 특성에 관한 연구이다. 사용된 활성화제는 황산칼슘(CaSO4, 이하 CS), 황산나트륨(Na2SO4, 이하 SS) 및 수산화나트륨(NaOH)이다. 황산염은 슬래그 중량의 2.5, 5.0, 7.5 및 10.0%로 치환하여 사용하였으며, NaOH는 2M 및 4M 농도의 수용액으로 사용하였다. 본 연구에서는 황산염(CS 및 SS) 치환율에 따른 배합(4가지 배합)과 2M 및 4M의 각각의 NaOH 수용액에 치환된 황산염을 혼합하여 시험체를 제작하였다. 시험체는 총 24가지의 배합에 따라 페이스트로 제작되었으며, 물－결합재 비는 0.5로 하였다. 경화된 시험체에 대해서 압축강도, 휨강도, 초음파속도(UPV), 흡수율 및 XRD 분석을 수행하였다. CS의 활성화제를 사용한 경우는 7.5% CS 치환율, 2M NaOH 수용액+ 5.0% CS 치환율 및 4M NaOH 수용액+ 5.0% CS 치환율의 시험체에서 최고의 압축강도를 나타내었다. 또한, SS의 활성화제를 사용한 경우는 10.0% SS 치환율, 2M NaOH + 7.5% SS 치환율 및 4M NaOH + 2.5% SS 치환율에서 최고의 압축강도 발현을 나타내었다. 휨강도, UPV 및 흡수율은 압축강도 발현 결과와 유사한 경향을 나타내는 것을 알 수 있었으며, XRD 분석결과 시험체 내에 생성된 반응물질은 ettringite, CSH 및 실리케이트계 수화물인 것으로 나타났다. AASC에서 황산염과 NaOH의 혼합 사용은 황산염의 단독 사용의 경우와 비교하여 일정 수준의 농도 범위에서 강도를 향상시키고 조직을 치밀화 시키는 등의 긍정적인 영향을 미치는 것으로 판단된다.

Rice blast caused by the fungal pathogen, Magnaporthe oryzae, is a serious disease affecting yield loss and decreasing its quality in rice production. Rice breeders in Korea have developed many japonica varieties showing resistance to blast. However, the blast resistance in most japonica varieties has broken down within a few years after they were released to farmers because of the spread of new virulent races of M. oryzae. There is the most effectiveness to look for novel resistant gene(s) that can express the resistance to broad-spectrum races in diverse environmental conditions. We identified a major QTL, qLB4.1 linked tightly to RM6352 and RM3643 in 52.6 cM region on chromosome 4 related to the resistance for isolate inoculation and nursery test, and neck blast from a Korean weedy rice, Geumleungaengmi33. This QTL explained 26.1∼28.6% and 45.3∼53.1% of total phenotypic variation by the allele of GL33 for isolate inoculation and nursery test, respectively. A line SR30058(52)-1-1 (Suweon545) that containing the QTL qLB4.1 was developed from Ilpum*4/GL33 by marker-assisted backcross method. This line showed resistant reactions to blast nursery test across regions and years, and resistance to neck blast at the hot-spot field in Jecheon. Suweon545 showed also durable resistance of lower 10% of diseased leaf areas (DLAs) in sequential planting method. This line screened by graphical mapping using 136 SSR markers that evenly distributed on 12 chomosomes. Suweon545 contained GL33 alleles of donor parent in a total of 12 loci (8.8%) including QTL region on chromosome 4. In future, Suweon545 would be useful to develop the broad-spectrum resistance variety in japonica rice breeding program.

Method for Protect of the river levee was method for installing concrete revetment block and concrete mat method in Korea. But this method is non-environmental approach because the vegetation can not take at all. To solve these problem, the method has been applied using porous vegetation concretes. Porous vegetation concrete has filler technique to provide water retention and nutrient a into the porous interior in order to facilitate plant growth. But filler used increasing the cost and the construction period. Therefore in order to not use a filler, a high absorption rate and good absorption capacity needed aggregate. Current, Blast furnace slag aggregate has been used in architectural and civil engineering field as an alternative aggregate resources. Blast furnace slag aggregate is high absorption rate and lighter in weight per unit. This study evaluated the absorption capacity of the blast furnace slag aggregate. Phosphorus Sorption experiment was carried out to produce a cylindrical acrylic(diameter 11cm, height 90cm). There filling the aggregate, for supplying the test solution was using as a pump from bottom to top. And The water of having passed through the solution was analyzed. Results, blast furnace slag aggregate showed absorption capacity of 64~77% of PO43-P and T-P. Crushed aggregate show absorption capacity of 6~24% of PO43-P and T-P. Blast furnace slag aggregate showed excellent result of good absorption capacity compared to the crushed aggregate showed excellent result.

This research investigated the effects of adding ground granulated blast furnace slag (GGBS) on the pullout resistance of smooth steel fibers embedded in GGBS cement grouts. 40% of cement in the grouts was replaced with GGBS to enhance the flowability and durability of grouts containing steel fibers. The pullout resistance of steel fibers embedded in grouts showed continuous enhancement as the age of grouts increased. The pullout resistance of GGBS grouts was higher than that of grouts without GGBS.

In experimental results, the prediction equation for 28 day-strength of GGBF slag concrete could be produced through the linear regression analysis of early strength and 28 day-strength. In order to acquire the reliability, all mixture were repeated as 3 times and each mixture order was carried out by random sampling. The prediction equation for 28 day-strength of GGBF slag concrete by 1-day strength won the good reliability.

Concrete with blast furnace slag (BFS) shows varied strength development properties different from normal concrete. Therefore, a precise prediction of compressive strength using a full maturity model is desired. The purpose of this study is to predict the compressive strength of concrete with BFS by calculating the apparent activation energy (Ea) and rate constant (kT) for each BFS replacement ratio. The method of Carino Model is used in this study for predicting compressive strength of concrete with BFS.

This study aims to verify the method of calculating blast load making similar damage from impact loading. In this process, LS-DYNA is used for modeling beam blast test. From the analysis, the max deflection of impact test and blast analysis is similar, so this method is verified.

As a result of strength test on FA and BFS, FA concrete showed higher increase of strength compared to OPC, when FA4000 and FA5000 were mixed 30%, respectively. For BFS concrete, those mixed with 30% and 50% of BFS8000, respectively, showed higher or equivalent strength compare to OPC. As a result of test of chloride penetration on FA and BFS, diffusion coefficients of concrete mixed with 30% FA4000 and FA5000, respectively, showed to restrain average 6.5% of diffusion coefficient compared to OPC. And in case of BFS concrete, those mixed with BFS6000 and BFS8000, restrained diffusion of chloride ions 253% and 336%, respectively, compared to OPC. Therefore, Mixing 50% of BFS was most efficient in order to maximize restraint of chloride penetration according to metathesis of large amount.

The study on physical properties of PHC pile and pile filler using blast furnace slag were evaluated. In the results, it was found that compressive strength and workability of PHC pile concrete with 20% of blast furnace slag adjusted S/a 27% were satisfied with desired properties and it was available to improve flow and compressive strength of file filler with 35% of blast furnace slag and TG as additive.

Concrete with blast furnace slag (BFS) shows varied strength development properties different from normal concrete. Therefore, a precise prediction of compressive strength using a full maturity model is desired. The purpose of this study is to predict the compressive strength of concrete with BFS by calculating the apparent activation energy (Ea) and rate constant (kT) for each BFS replacement ratio. The method of Carino Model is used in this study for predicting compressive strength of concrete with BFS.

CO2 emitted from building materials and construction materials industry reaches about 67 million tons, which occupy about 30% of CO2 emitted from the construction field. Controls on the use of consumed fossil fuels and reduction of emission gases are essential for the reduction of CO2 in the construction area as we reduce the second and third curing to emit CO2 in the construction materials industry. Accordingly, this study applied the low energy curing admixture (hereinafter “LA”) to the extruded panels to observe the physical properties, depending on the mixing amount of fiber, type of fiber and mixing ratio of fiber. The type of fiber did not appear to be a main factor to affect strength, while the LA mixing ratio and mixing amount of fiber appeared to be major factors to affect strength. Especially, the highest strength was developed when the LA mixing ratio was 40%, whereas the test object with the mixing ratio of 50% resulted in the decrease of strength. In addition, it appeared that the mixing ratio of fiber greatly affected flexural strength and strength increased as the mixing ratio increased.

본 연구에서는 세계적으로 문제가 되고 있는 하천 및 수계내의 중금속 오염 방지와 대책을 강구하기 위해 고로슬래그가 중금속흡착에 유리한 물리, 화학적 특성을 지녔다고 판단하여 흡착제로서의 중금속흡착능이 충분한지에 대해 검토하였다. 흔히 중금속흡착제로 알려진 활성탄의 경우 제거효율은 좋지만, 경제적인 부담감을 안고 있으며, 현재 최근 활발한 산업 활동으로 인하여 나오는 건설폐기물이나 산업부산물의 문제를 해결하기 위해 이를 이용한 중금속 제거 기술이 보고되고 있다. 특히, 고로슬래그의 경우 선철 1t당 0.5~1t정도의 양이 배출되며, 이에 고로슬래그의 흡착제로서의 사용 검토가 된다면 제철부산물의 처리와 하천 및 수계내의 수질개선에도 도움이 된다고 판단했다. 고로슬래그는 체가름시험을 통하여 1.2~2.5mm의 치수를 사용하였으며, 중금속은 Cd, Cu, Pb, Zn으로 선정하여 등온흡착실험을 진행하였다. 중금속의 초기농도는 1ppm, 2ppm, 5ppm로 설정하고 120분간 128rpm으로 교반하여 진행하였으며, 일정 시간간격을 두어 샘플을 채취하여 시간 당 중금속의 부하량을 산정하였다. 그 결과 Cd의 경우 120분간 선형의 그래프를 나타내며 제거 되었으며, Cu, Pb, Zn은 20~30분까지 급격하게 중금속의 농도가 감소하다가 120분까지 서서히 감소되었다. 초기농도에 관계없이 120분동안 중금속 제거량은 총 1ppm 정도였으며, 결과적으로 고로슬래그의 중금속 흡착제로서의 흡착능이 뛰어나다고 판단된다. 이를 통해 하천 및 수계내의 수질개선을 위한 비점오염저감시설이나 장치의 흡착제나 또는 여과저류지등의 여재로 이용할 수 있을 것으로 기대된다.

폭발사고나 테러 등이 증가함에 따라 구조물 방폭성능의 요구가 증가되고 있다. 국내에서도 폭발사고 등에 대비하기 위한 방폭구조물의 수요가 증가할 것이며, 이를 위해서는 다양한 측면의 관련 연구가 수행되어야 할 것이다. 본 연구에서는 철근상세가 보-기둥 접합부의 방폭성능에 미치는 영향에 대해 분석하였다. 표준 시험체는 보-기둥 설계매뉴얼을 바탕으로 정하중에 대해 설계되었으며 이 외에 철근상세에 따른 영향을 분석하기 위해 휨, 전단, Diagonal철근 등이 보강된 시험체와 비교하였다. 접합부의 방폭성능을 평가하기 위해 유한요소해석 프로그램인 LS-DYNA에 의한 해석적 연구가 수행되었다. 해석결과는 시험체의 파괴형상, 변형, 지점회전각 그리고 철근의 응력을 포함하고 있다. 추가적인 휨철근이 보강된 시험체의 방폭성능을 표준 시험체와 비교하여 큰 차이를 보이지 않았으나, Diagonal 철근이 보강된 시험체는 보 영역에서 발생하는 소성힌지영역을 이동시켜 접합부의 안전성을 확보하는 등 방폭성능을 향상시켰다. 따라서 동일한 철근비에서 휨철근보다 Diagonal철근이 폭발하중에 더 효율적으로 저항하는 것을 확인하였다. 이에 더하여 전단철근이 배근된 시험체는 우수한 방폭성능을 보였으며, 이를 통해 폭발하중을 받는 콘크리트 구조에서 휨 성능과 함께 전단성능 역시 중요한 고려사항임을 확인할 수 있었다.

This study examined dynamic and characteristics and chloride penetration of concrete mixed with large amount of FA and BFS, which are considered for positive application to construction fields with purpose of long-tern durability of concrete structures. As a result of strength test on FA and BFS, FA concrete showed higher increase of strength compared to OPC, when FA4000 and FA5000 were mixed 30%, respectively. For BFS concrete, those mixed with 30% and 50% of BFS8000, respectively, showed higher or equivalent strength compare to OPC. As a result of test of chloride penetration on FA and BFS, diffusion coefficients of concrete mixed with 30% FA4000 and FA5000, respectively, showed to restrain average 6.5% of diffusion coefficient compared to OPC. And in case of BFS concrete, those mixed with BFS6000 and BFS8000, restrained diffusion of chloride ions 253% and 336%, respectively, compared to OPC. Therefore, Mixing 50% of BFS was most efficient in order to maximize restraint of chloride penetration according to metathesis of large amount. For relation between compression strength and diffusion coefficient of FA and BFS concrete, as strength increased, diffusion coefficient decreased. In this study, when mixing FA and BFS to concrete for long-run durability and restraint against chloride penetration, for FA, mixing it to concrete with less or equivalent 30% of replacement rate was most efficient. And for BFS, as fineness was higher and mixing it to concrete with less or equivalent 50% of replacement rate, there were results of higher strength compared to OPC and more efficient restraint of chloride ions.

본 연구에서는 표준실험체 (BSS), 순환굵은골재와 고로슬래그 미분말의 치환과 하이브리드섬유를 보강한 실험체 (BSPRR1, BSPRR2시리즈), 순환굵은골재와 고로슬래그 미분말의 치환과 PVA섬유를 보강한 실험체 (BSPG시리즈)로 총 13개의 실험체를 실물크기의 1/2로 축소 제작하여 실험을 수행하였다. 실험을 통하여 얻어진 결과를 비교⋅분석하여 하중-변위, 파괴형태, 최대내력 등을 규명함으로써 구조성능의 개선정도를 평가하였다. 실험결과 순환굵은골재와 고로슬래그 미분말을 치환한 콘크리트에 하이브리드섬유를 보강한 실험체 (BSPRR1, BSPRR2시리즈)의 경우 표준실험체 (BSS)에 비하여 압축강도는 최대 13%, 최대내력은 4~21%, 연성능력은 각각 4~28% 증가하는 결과를 나타내었다. 그리고 또한, 충분한 연성적인 거동과 안정적인 휨인장 파괴를 나타내었다.

Carbon dioxide generated from construction materials and construction material industry among the fields ofconstruction is approximately 67million tons. It is about 30% of the carbon dioxide generated in the fields of construction.In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumedand decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in constructionmaterial industry. Therefore, this study produced an extrusion panel by using cement as the base materials and substitutingbinding materials up to 40% to analyze strength characteristics. According to the results of strength characteristics bythe replacement binder (Low energy curing Admixture) showed an apparent active strength improvement. In particular,specimens substituting binder as 45% indicated the greatest strength improvement. When binding materials was used withsubstitution, it showed strength characteristics similar or higher than specimens made from tertiary autoclave curing assecondary steam curing.

Reaction degree of ground granulated blast furnace slag(GGBFS) in cement paste was measured by water-binder ratio and GGBFS replacement ratio, curing temperature with ages using selective dissolution. In result of experimental, when water-binder ratio and curing temperature were high and replace ratio of GGBFS was low, reaction degree was estimated high.

This study evaluated compressive strength on the slurry for HPFRCC using blast- furnace slag with various blain as a basic study for developing alternative technology of the existing HPFRCC.