본 연구는 특화된 문화관광지이자 주제관광의 대상이기도 한 한방식물원 탐방객의 인식 분석을 통해 한방식물원의 설계와 관리 방향을 제시하고자 한 것이다. 중국 하북성 안국시의 약박원(藥博園)을 사 례로 지각된 가치가 탐방객의 정서 및 편익에 미치는 영향을 밝히고자 AHP-엔트로피 가중치를 통해 한방식물원 탐방객의 지각된 가치 지표의 가중치를 계산하는 한편 요인분석을 통해 요인과 지표의 관 계를 탐색하였다. 본 연구에서는 경관평가 연구에서 일반적으로 적용하는 지표 가중치 분석방법을 탐 방객의 지각된 가치 척도 도구로 활용하였다. 그 결과, 자극 내부요인반응(S-O-R)이론의 관계를 바탕으 로 ‘탐방객의 지각된 가치’, ‘정서’, ‘지각된 편익’ 간의 관계를 설명하는 구조 방정식 모델에서는 다른 요인과는 달리 ‘관리 서비스 지각가치’는 탐방객의 지각된 편익에 유의한 정(+)의 영향을 미치지 않는 것으로 나타났다. 또한 AHP 계층분석법 및 엔트로피(Entropy) 가중치법을 통해 탐방객의 지각된 가치 지표에 관한 주·객관적 복합 가중치를 계산한 결과, ‘환경 지각 가치’의 가중치가 가장 높은데 반해 ‘관 리서비스 지각 가치’의 가중치는 가장 낮은 것으로 밝혀졌는데 이는 구조방정식의 상관관계 검정 결과 와 일치하는 것이다. 궁극적으로 한방식물원의 주변의 ‘환경’은 탐방객의 체험 향상에 가장 중요한 가 치임이 확인되었다.

본 연구는 유럽연합(EU)의 환경문제와 섬유패션산업 현황을 바탕으로 스페인의 탄소배출 절감 노력과 인디텍스 그룹의 전략을 분석하였다. 특 히 인디텍스 그룹의 사례를 통해 섬유패션산업의 탄소배출 절감 전략의 효과성을 검토하며, 섬유패션산업이 어떻게 지속 가능한 방향으로 전환 될 수 있는지의 시사점을 제시하고자 한다. 특히 석유산업에 이어 두 번 째로 큰 환경 파괴원인으로 지목되는 패스트 패션의 탄소배출 문제를 조 명한다. 연간 전 세계에서 섬유패션산업은 탄소 배출량의 약 10%를 차 지하며, 이 수치는 모든 국제선 및 해상 운송의 배출량을 합친 것보다도 더 크다. 특히 패스트 패션의 생산과 유통 과정에서 발생하는 탄소배출 은 그 크기가 막대하여 지속가능성에 큰 위협을 미치고 있다. 즉, 패스트 패션의 탄소배출 문제를 해결하기 위한 전략적 접근 방식을 제시하며, 섬유패션산업의 지속가능성 향상을 위한 핵심 요소를 도출하고자 한다.

When decommissioning a nuclear power plant, it is expected that clearance or radioactive waste (e.g., soil, concrete, metal, etc.) below the low-level will be generated in a short period on a large scale. Among the various types of waste, most of the contaminated soil is known to be classified as clearance or the (very) low-level radioactive waste. Accordingly, an accurate measurement and classification of contaminated soil in real-time during the decommissioning process can efficiently reduce the amount of soil waste and the possibility of contamination diffusion. However, in order to apply a system that measures and classifies contaminated soil in real-time according to the level of contamination to the decommissioning site, a demonstration is required to evaluate whether the system is applicable to the site. In this study, to establish requirements for determining the applicability of the system to the decommissioning site, preceding cases from countries with abundant decommissioning experience were investigated. For example, MACTEC of the U.S. demonstrated the developed system at the Saxton nuclear power plant in the U.S. and confirmed that the amount of soil that can be analyzed per hour in the system is affected by radionuclides, minimum detectable activity (MDA), and applicable volume. In the future, therefore, we will utilize the result of this study to develop the requirements of demonstrating the system for measurement and classification of contaminated soil in real-time.

For safe and successful decommissioning, it is one of the most important procedures that establishing the goal and complying with regulations of which final status of decommissioned site and building. The dose criteria for cyclotron facilities should be established and applied to reuse the site and building, since building and component of a cyclotron facility have been activated by incident secondary neutrons from radioactive isotope processes (e.g. 18O(p,n)18F, etc.). Furthermore, appropriate approaches should be applied to demonstrate compliance with the dose criteria for reliability of reuse. It is of noted that U.S. NRC (Nuclear Regulatory Commission) has confirmed that the residual radioactivity which distinguishable from background radiation results in a TEDE (Total Effective Dose Equivalent) does not exceed 25 mrem (0.25 mSv) per year as radiological criteria for unrestricted use of not only nuclear power plants but also cyclotron facilities referred to 10 CFR Part 20.1402. In addition, U.S. NRC noted the two approaches (i.e. dose assessment methods and, DCGL and final status surveys) which can be applied for demonstrating compliance with the dose criteria of 10 CFR Part 20 and recommended DCGL and FSS approach based on advantages and disadvantages of the two approaches. In order to using DCGL and FSS approach, U.S. NRC suggested screening approach; using DandD Version 2 which assesses TEDE under ICRP 28 and site-specific approach; using all models or computational codes which approved by NRC staff. There are several foreign cases that release of cyclotron facilities after decommissioning (i.e. U.S. and Japan). U.S., for examples, there are two DCGL approach cases and one dose modeling case based on 25 mrem per year same as reactor facilities. The dose modeling case, however, which may not be really used in Korea because of its low applicability. On the other hand, Japan case did not establish any radiological criteria for site and building reuse such as DCGL and just confirm “no more contamination” which is all residual radioactivity is lower than MDC based on real survey. Japan case also may not be used in Korea since criteria of “no more contamination” is not clear and hard to apply for all sites. Considering regulations and criteria for site release and reuse in Korea, this study aims to suggest radiological criteria and the demonstration approach of compliance for decommissioning of cyclotron facilities based on Nuclear Safety Acts and NSSC notices.

For the disposal of radioactive waste from nuclear facilities, assessing their radioactivity inventories is essential. As a result, countries with nuclear facilities are implementing assessment schemes tailored to their respective policies and available resources for radioactive waste management. This paper specifically describes the assessment scheme for radioactivity inventory applied to metal waste generated during the dismantling of the Japan Power Demonstration Reactor (JPDR), a 1.25 MW BWR. The distinctive aspect of the Japanese approach lies in the fact that, for a pair of a key nuclide and a difficult-to-measure (DTM) nuclide that lack a significant correlation in their concentrations, the mean activity concentration method was used. In this method, an arithmetic average of all measurements of the DTM nuclide from representative drums, including MDAs (Minimum Detectable Activities), was assigned to the concentration of the DTM nuclide for all drums, regardless of the concentration of its paired key nuclide. Conversely, for a specific pair of a key nuclide and a DTM nuclide with a significant correlation, the scaling factor method was applied, as is common in many other countries. This Japanese case can serve as a valuable reference for Korea, which does not have the option of using the mean activity concentration method in its assessment scheme.

The decommissioning of Korea Research Reactor Units 1 and 2 (KRR 1&2), the first research reactors in South Korea, began in 1997 and the decommissioning status is currently proceeding with phase 3. It is expected that more than 5,000 tons of dismantled wastes will be generated as the contaminated building is demolished. Since these dismantled wastes must be disposed of in an efficient method considering economic feasibility, it is desirable to clearance extremely low-level wastes whose contamination is so minimal that the radiological risk is negligible. In Korea, in order to approve the clearance of radioactive waste, it must be proven that the nuclide concentration standards are met or that the dose to individuals and collectives is below the allowable dose value. At the KRR 1&2 decommissioning site, dismantled wastes have been steadily being disposed of through clearance procedure since 2021. Clearance was approved by the Korean Institute of Nuclear Safety (KINS) for one case of concrete waste in 2021 and two cases of metal waste in 2022. In 2023, the clearance of metal waste and asbestos waste has been approved so far, and in particular, this is the first case in Korea for asbestos waste. In this study, we compared the dose assessment methods and results of clearance wastes at the KRR 1&2 decommissioning site from 2021 to present. Dose assessment was conducted by applying the landfill scenario for concrete and asbestos and the recycling scenario for metal waste. The calculation codes used were RESRAD-onsite 7.2 and RESRAD-recycle 3.10. The dose conversion factors (DCF) for each age group (infant, 1y, 5y, 10y, 15y, adult) of the target nuclide used the values presented in ICRP-72, and in particular, geo-hydrological data of the actual landfill site was used as an input factor when evaluating landfill scenarios. As a result of the dose assessment, when landfilling concrete wastes in 2020, the personal dose and collective dose were evaluated the most at 2.80E+00 μSv/y and 4.83E-02 man·Sv/y, respectively.

Advanced countries in the field of nuclear research and technology are currently examining the feasibility of deep geological disposal as the most appropriate method for the permanent management of high-level radioactive waste, with no intention of future retrieval. Deep geological disposal involves the placement of such waste deep underground within a stable geological formation, ensuring its permanent isolation from the human environment. To guarantee the enduring isolation and retardation of radionuclides with half-lives spanning tens of thousands to millions of years from the broader ecosystem, it is imperative to comprehend the long-term evolution of deep disposal systems, especially the role of natural barriers. These natural barriers, typically consisting of bedrock, encase the repository and undergo long-term evolutions due to tectonic movements and climate variations. For the effective disposal of high-level radioactive waste, a thorough assessment of the site’s long-term geological stability is essential. This necessitates a comprehensive understanding of its tectonic evolution and development characteristics, including susceptibility to seismic and magmatic events like earthquakes and intrusions. Furthermore, a detailed analysis of alterations in the hydrogeological and geochemical environment resulting from tectonic movements over extended time frames is required to assess the potential for the migration of radionuclides. In this paper, we have examined international evaluation methodologies employed to elucidate the predictive long-term evolution of natural barriers within disposal systems. We have extracted relevant methods from international case studies and applied a preliminary scenario illustrating the long-term evolution of the geological environment at the KURT (KAERI Underground Research Tunnel) site. Nevertheless, unlike international instances, the scarcity of quantitative data limits the depth of our interpretation. To present a dependable scenario in the future, it is imperative to develop predictive technologies aimed at comprehensively studying the geological evolution processes in the Korean peninsula, particularly within the context of radioactive waste disposal.

Deep borehole drilling is essential not only to select the host rock type for deep geological disposal of high-level radioactive waste (HLW), but also to identify the characteristics of the disposal site during the site selection process. In particular, since the disposal depth of HLW is considered to be over 300 m, deep borehole drilling must be performed. In deep borehole drilling, drilling design, excavation, and operation may vary depending on the rock type, drilling depth, and drilling purpose etc. This study introduced cases in which Korea was divided into four geotectonic structures and four representative rock types and conducted with a goal of 750 m drilling depth. Prior to this, a review of deep drilling cases conducted at domestic and abroad was presented. If sufficient time and cost are available, several drilling holes can be excavated for various purposes, but if not, one or two drilling holes should be used to achieve the objectives of various fields related to HLW disposal. The presence of bedding, strata or fault zones depending on the type of rock, etc. may affect drilling deviation or circulating water management. In addition, unlike drilling in general geotechnical investigation drilling, the use of polymers or grouting agents is limited to determine hydraulic and geochemical characteristics. This report introduces the experience considered during the design and drilling process of deep drilling in granite, gneiss, sedimentary rock, volcanic rock, etc., and is expected to be used as basic data when carrying out future HLW projects.

To ensure the long-term supply and sustainability of uranium fuel, exploring alternative resources is essential, particularly considering that terrestrial reserves of uranium are limited (about 4.6 million tons). Since the amount of uranium dissolved in seawater is approximately 1000 times that of terrestrial reserves (i.e., about 4.5 billion tons), uranium extraction from seawater (UES) can be an alternative resource. However, the ultra-low concentration of uranium in seawater (about 3.3 ppb) poses a significant challenge in achieving economic feasibility for UES. This paper introduces case studies on the cost analysis of systems for recovering uranium from seawater, specifically focusing on braided fiber-based adsorbents developed by JAEA and ORNL. The cost analysis has been conducted based on using the deployment of these adsorbents on the bottom of the sea, which is a passive deployment method, thereby reducing the total costs of recovery. The analysis results can be used to identify R&D areas necessary for reducing cost components, making UES economically feasible.

In recent times, drone technology has been rapidly advancing and becoming increasingly popular. Furthermore, there has been an increase in the number of crimes and terrorism cases targeting national facilities using drones. This study aims to categorize the types of drone threats that could pose future risks to nuclear power plants. For this study, we are investigating domestic and foreign drone terrorism cases and identifying the specifications of drones used. It has been confirmed that products from Chinese DJI companies have frequently appeared as commercial drones used in terrorism. This suggests that conversion of general commercial drones into weapons can be effectively utilized for terrorist activities. There is an elevated risk of terrorism involving multiple small drones. Nuclear power plants must also devise protective measures against a large influx of drones. Additionally, it is predicted that North Korea is developing drones equipped with return technology through GPS-based autonomous mission flights. North Korea’s drones are presumed to have been converted from Chinese drones (SKY-09P, UV10CAM, etc.). According to the analysis based on the weight and size of the drone, drones weighting less than 150 kg and wingspan of less than 3 m are used for terrorism. To effectively detect drones, it is necessary to implement measures such as integrating and deploying various equipment to compensate for equipment limitations (radio waves, radar, video, sound, etc.). In the case of long-distance flight, a number of fixed-wing drones capable of autonomous mission flight and long-distance flight were used. North Korea’s drones use GPS-based autonomous mission flights, so it is necessary to prepare drones that do not transmit RF signals to detect them. Both RF signal detection and GPS jamming should be carried out, with GPS jamming taking precedence, even in the case of fixedwing drones. The results of this study could contribute to enhancing the level of physical protection of nuclear power plants.

본 연구는 관형격 명사구 구성 ‘명사+ 의+ 명사’에서 선행 성분과 후 행 성분을 연결을 시키는 ‘의’는 단순한 수의적 실현 경우에서 특히 통사 적 실현 가능성에 대한 논의를 하고자 하는 목적이 있다. 특히 수의적 경우에서 나타난 ‘의’ 생략 실현 양상을 검토하고자 할 것이다. 본 연구 는 먼저 기저 구조에 들어가 문장에서 서술어와 논항을 연결하는 관계 즉, 연합성 관계를 통해, ‘의’가 속한 관형격 명사구가 서술어와의 연합 성 정도에 따라서 1차 서술어적 관형격 명사구와 2차 서술어적 관형격 명사구로 나뉜다. 다음은 관형격 명사구가 표면구조에서 벗어나서 심층 구조에 변형하며 ‘NP1+ 의+ NP2’는 총 아홉 가지로 분류한다. 그리고 관형격 명사구가 통사적 기저문장 변형에서 유형과 양상을 검토하며 통 사적 수의적 경우는 네 가지, 의미적 수의적 경우는 네 가지로 나뉜다. 이런 분류를 통해 순수한 관형격 조사 ‘의’가 수의적 실현 경우에서 생략 의 형상을 자세히 볼 수 있는 연구 성과를 얻을 수 있다. 그리고 하나의 문장에서, 화자의 직관과 명사구 사용 상황에 따라 ‘의’가 강한 수의성 (possessiveness)을 나타내는 경우가 흔하다. 이러한 강한 수의성을 갖 는 ‘의’는 문장 내에서 기저 구조를 분석을 통해 ‘의’를 더 깊이 이해할 수 있다는 의미가 있다.

본고는 최근 새로운 융합교육 제도의 하나로 주목받고 있는 마이크로 디그리의 기본 개념과 의미에 대해 살펴보고, 국내외 마이크로디그리 교 육과정의 적용사례를 통해 향후 마이크로디그리 교육과정이 대안적 융합 교육으로 정착하기 위한 조건과 고려해야 할 점들에 대해 탐색하는 것을 목적으로 한다. 이를 위해 최근 정부의 소단위 학위과정 인정의 근거를 살펴보고, 국내외 마이크로디그리 도입 사례에 대한 비교·분석을 실시했 다. 교육기관의 규모와 적용범위, 교육목표, 운영주체 등을 중심으로 해 외와 국내 사례를 각각 비교했다. 해외의 경우, 대학보다는 주로 기업 및 연구기관이 운영 주체가 되는 대안학교의 형태로 운영되는 반면, 국내에 서는 마이크로디그리가 대학의 전공 및 교양교육과정을 보완하는 형태로 받아들여졌다는 점에서 상이점을 찾을 수 있다. 하지만 급변하는 사회 수요를 교육과정에 바로바로 적용할 수 있다는 장점을 가진 마이크로디 그리의 본질을 고려한다면, 사회 수요를 신속히 교육과정에 반영해 산업 현장과 대학 교육의 거리를 근거리로 유지·지속시킬 수 있는 보다 명확 하고 독립적인 학내 전담 운영 조직의 마련도 고려될 필요가 있다. 또한 본고에서는 마이크로디그리의 도입단계와 운영단계 각각에서 고려될 필 요가 있는 네가지 지점들에 대해서도 살펴보았다. 이를 통해 대안적 융 합교육으로서 마이크로디그리의 도입과 정착에 필요한 조건은 무엇인지 가늠해 보았다.

PURPOSES : This study aims to examine actual cases of providing detour information in accidental situations such as traffic accidents and road construction through a VMS installed on national highways in metropolitan areas with alternative routes, as well as cases of simultaneously providing travel time information on parallel paths such as national and regular highways. For each case, we analyzed whether the provision of VMS traffic information leads to route changes and substantial effects. METHODS : To analyze traffic changes on the main and detour roads based on the detour information provided on traffic accidents in actual cases, the traffic volume and speed on the accident day were compared with those on the same days and at the same time of the day (regular days) based on the VDS data of the main and detour roads. Cases providing more detour information on road construction were investigated by examining three time periods: one week from construction initiation and one week before and after the construction period (regular days). The traffic volume and speed on the main road were compared based on the VDS data, and those on the detour road were compared based on data made available by private entities. Regarding the cases of simultaneously providing drivers with comparative information on travel time over parallel sections of national and regular highways, traffic situation changes in highways were analyzed in the following special traffic control periods (New Year's Day, NY Day), during which congestion is expected due to heavy traffic: before and after the provision of comparative information for 2015 New Year's Day and 2016 NY Day. RESULTS : The detour rate related to route changes based on the detour information for traffic accidents was 35%. On the detour route, the traffic volume increases as traffic from the main road is absorbed. However, the average travel speeds did not differ significantly. When further detour information regarding a road construction project was provided, the detour rate from the main road was 21%. The travel speeds were similar, except on the first day of construction. Almost no changes were observed in the first section of the detour. The speed slightly decreased in the second section but did not significantly hinder the traffic flow. When comparative traffic time information on parallel routes (national highways and expressways) was provided, the traffic volume increased to some extent after the report was provided for every case. However, the data frequency rate in the 5-min unit, which was still under the congestion speed standard (40 km/h), decreased. This indicates that traffic congestion was significantly relieved. CONCLUSIONS : Previous studies on detour rates or route changes based on VMS traffic information have focused on VMS instruments on expressways. Although their estimates were based on simulated situations, this study used actual VMS installed on national highways. In addition, this study utilizes the existing case records of national highway ITS centers, covering traffic situation monitoring, measures for accidental situations, etc., in regular times or special traffic control periods, as well as statistical data, including ITS real-time traffic information. The analysis results of this study accurately represent situations on actual roads and can be utilized to analyze future ITS operation and installation project effects.

Industrial complexes are areas where manufacturing companies are integrated, and logistics between tenant companies play a very important role, but idle resources can occur depending on the situation if each company operates independently. Accordingly, this study aimed to reduce overall logistics costs and increase corporate productivity by looking at ways to share and utilize logistics resources such as warehouses and transportation equipment to efficiently utilize logistics resources in industrial complexes and implementing a logistics sharing platform that can share these idle resources. To this end, this study conducted a research survey on the logistics status of manufacturing companies in Ulsan-Mipo Industrial Complex, based on this analysis, the necessity of logistics resource types and utilization of industrial complex resident companies, and based on this, a service model for logistics resource sharing was studied. In addition, it was intended to analyze the operational characteristics of the existing logistics system to derive improvements and to derive optimal measures to utilize information on shared idle resources. This study confirmed the importance of sharing and utilizing idle resources to optimize logistics resources in industrial complexes, and is expected to contribute to reducing logistics costs and increasing logistics efficiency of tenant companies.

본 연구는 영화 <헤어질 결심>을 중심으로 영화 속 색상의 상징적 의 미와 감독의 제작 스타일을 탐구하여 영화 속에서 색상이 얼마나 중요한 지를 이해하고, 감독이 색상을 통해 주제를 어떻게 전달하는지를 보여주 고자 한다. 본 연구는 움베르토 에코 기호학을 바탕으로 색상의 보편적 인 상징성과 결합하여 ‘표현-내용-해석체’의 삼원론적 기호 관계를 분석 방법으로 사용하고, 추측 방법을 통해 색상 기호 의미의 생산 과정을 설 명하고 영화 속 색상의 다양한 표현 방식이 상징하는 의미를 심도 있게 발굴하였다. 또한, ‘기호 활동’의 반복 이론을 통해 서로 다른 색상의 반 복적인 등장을 분석하여 색상과 영화 주제와의 연관성을 설명하였다. 본 연구를 통해 박찬욱 감독이 독창적인 색상 활용을 영화의 디테일한 부분 과 잘 접목시켜 영화 표현 형식의 다양화와 주제 강화를 실현하고, 관객 의 감성적 참여를 높인다는 것을 알 수 있다. 색상은 긴장감이 넘치는 분위기를 조성할 뿐만 아니라 인물에게 신비한 매력을 부여해 전반적인 스토리에 예술적 요소를 더한다. 본 연구는 영화 속 색상 활용에 따른 기호학 분석에 새로운 아이디어와 방법을 제시하고, 영화 제작에 이론적 인 참고 자료를 제공하고자 한다. 향후 연구에서는 더 많은 기호학 이론 을 활용해 연구 범위를 확대하고, 영화 색상 활용에 대한 인식을 풍부하 게 하여 영화 예술 발전을 더욱 촉진할 수 있을 것이다.

전 세계 대부분의 국가들은 탄소배출량을 줄이기 위한 노력을 지속하고 있다. RC구조물의 탄소배출량을 줄이기 위해 수십 년간 건설 분야의 많은 연구자들이 철근콘크리트 구조물에서 철근을 FRP보강근으로 대체하기 위한 연구를 수행하여 왔다. 북미지역을 비롯한 일부 지역에서는 해양구조물이나 도로 등에 CFRP보강근을 사용한 바 있다. 그러나 건축물에는 철근을 CFRP보강근으로 대체한 사례와 적용을 위한 연구는 거의 진행되지 않았다. 따라서 본 연구에서는 예제건물을 선정하여 철근콘 크리트구조로 설계한 후, 철근을 CFRP보강근으로 대체하여 설계함으로써, 철근콘크리트건물에서 철근을 CFRP보강근으로 대체 하였을 때 철근량을 비교하였다. 그 결과 슬래브의 철근비가 0.005미만으로서 CFRP의 사용량을 줄일 수 있을 뿐만 아니라 안전 율 측에서도 우수한 것으로 나타났다.

The Lepidoptera - moths, butterflies, and skippers, is one of the three most species-rich, studied, diverse, and widely distributed insect orders, with over 157,424 species worldwide (van Nieukerken et al., 2011). Moths and butterflies serve as valuable indicator species for monitoring climate change. Conversely, the distribution of lepidoptera is actively and interactively influenced by changes in climate and land cover (Warren et al., 2001). Over the last five years, there are many oriental moth species, such as genus Stictane, Siccia, Philenora, Ammatho, Asota, etc., have been newly recorded in Korea, since other new records are very likely yet to be discovered in this country and nearby.

Since the importance of integrated pest management to minimize environmental damage and maximize pest control effectiveness has emerged, efforts to put it into practice have continued. To implement IPM, it is necessary to estimate the economic injury level to determine the control method by identifying pests and weeds that damage the quantity and quality of crops in the field, investigating the occurrence level, and calculating the ratio of cost and effectiveness. Also, damage to host plants caused by increased density of insect pests appears to change plant’s health that key factor for managing crops. Therefore, understanding the relationship between the density of pests and the damage to the host plants is necessary. This study aims to analyze the causal relationship between the density of insect pests and damage to the host plants for estimating the economic injury level of insect pests on the host plants and investigating the possibility of pest control decision-making using plant health status.