This study, examines the flow characteristics of upstream channel depending on water gate operation of Nakdan Multi-fuctional weir. The specific purpose of this study are to simulate the variation of flow velocity depending on the operation of the weir using 1-dimensional hydraulic model, HEC-RAS, and compare it with observed velocity. For discharge conditions from 50 ㎥/s to 3,500 ㎥/s, it is observed that the velocity of upstream channel is almost constant, whereas for probability flood discharge, the velocity and froude number are increased as the discharge values are increased. The velocity values for downstream boundary condition EL, 40.0 m are more decreased than those for EL. 40.5m. From comparison on the variation of water stage depending on water gate operation, it is observed that the stage values are almost constant for discharges below 300 ㎥/s, whereas 5 cm to 20 cm for discharges over 700 ㎥/s. Flow velocity at streamflow gauging station. Nakdong, is decreased by more than 875% after installing the weir. The results obtained from this study indicate that the velocity of upstream channel is decreased and the discharge and velocity of downstream channel are significantly varied after installing the weir.

하천에 설치되는 강변저류지의 효율적 설계를 위해서는 정확한 부정류 흐름 해석이 반드시 필요하다. 일반적으로 하천의 부정류 수치모의는 1차원 부정류 수치모형인 HEC-RAS를 많이 사용하고 있다. 하지만 강변저류지가 있는 하도에서의 부정류 흐름에 대한 수리실험과 현장 모니터링 자료가 거의 없기 때문에 HEC-RAS를 이용한 부정류 수치모의 결과의 신뢰도를 확신하기가 어렵다. 따라서 본 연구에서는 부정류 수리실험을 수행하여 강변저류지가 있는 하도에서의 HEC-RAS를 이용한 부정류 수치모의 적용성을 검토하였다. HEC-RAS 적용성 검토는 직선수로에 강변저류지가 설치되어 있거나 그렇지 않은 경우에 대해 부정류 수리실험을 실시하여 측정된 결과와 비교하여 평가하였다. 특히, 강변저류지가 설치되어 있는 경우는 강변저류지의 저류용량이 충분하여 하도에서 강변저류지로 통하는 위어에 완전 횡월류 흐름만 발생하는 경우에 대해 실험을 수행하였다. 강변저류지가 설치되지 않은 직선수로에 대한 HEC-RAS의 수위 계산 결과는 최대 3% 오차를 유량은 최대 1% 오차를 보였으며, 강변저류지가 설치된 경우의 HEC-RAS 수위 계산 결과는 최대 4% 오차를 유량은 최대 2% 오차를 나타냈다.

In this study, the flow characteristic analysis at the curved-channel of the actual channel section is compared and reviewed using the 2D RMA-2 model and the 3D FLOW-3D model. the curve section with curve rate 1.044 in the research section is analyzed applying the frequency of he project flood of 100 years. According to the result, the issue for the application of the FLOW-3D Model’s three-dimensional numeric analysis result to the actual river is found to be reviewed with caution. Also, application of the 3D model to the wide basin’s flood characteristic is determined to be somewhat risky. But, the applicability to the hydraulic property analysis of a partial channel section and the impact analysis and forecast of hydraulic structure is presumed to be high. In addition, if the parameters to reflect the vegetation of basin and the actual channel, more accurate topological measurement data and the topological data with high closeness to the current status are provided, the result with higher reliability is considered to be drawn.