PURPOSES: This study is to investigate the Hot In-Place recycling asphalt mixture in Korea using field produced materials. METHODS: Hot In-Place reclaimed asphalt mixture was investigated to evaluate the mixture properties based on various test results such as Marshall Test, Indirect Tensile Test, TSR, and Wheel Tracking Test. These test values were compared with domestic standard specification. RESULTS: The result of the laboratory experiment indicates that the Hot In-Place Reclaimed(HIR) asphalt mixture produced at the field constrution site was satisfied all of the test criteria such as Indirect tensile test, Marshall and TSR test, and wheel tracking test. During the test, the research team found that current HIR system is required an extention of mixing time to improve quality and to reduce variation of sample to sample. Although the current HIR mixture was passed the test criteria, there is a potential capability to enhance the mixture properties as extend mixting time. CONCLUSIONS: Based on these laboratory test results, It would be concluded that domestic HIR mixture's properties were satisfied all standard specification related with evaluation of recycling asphalt mixtures. Based on this case study result, there is a chance to save construction cost and increase the usage of reclaimed asphalt concrete in the future.

본 연구에서는 교량기초 말뚝의 부주면마찰력 시험을 통하여 연약지반에 타설된 강관말뚝의 부주면마찰력을 측정하였으며 장기적인 마찰응력의 관측시험을 통하여 경제적인 상부구조물 시공시기를 판단하였다. 본 연구의 결론은 다음과 같다. (1) 연약지반에서 부마착력의 크기는 침하속도가 클수록 크게 나타났다. (2) 마찰력의 관계 그래프에서 마찰응력의 증감이 없는 시기를 확인하여 상부구조물 시공시기를 판단할 수 있었다. (3) 말뚝정재하시험결과와 부주면마찰력 시험결과를 비교해 본 결과 항타 직후의 부주면마찰력은 재하시험 시의 마찰응력보다 크게 나오는 것으로 판단되며 15일 경과후의 측정값은 비슷하게 나오는 것으로 판단되었고, 이론식에 의한 결과와도 비슷하였다. (4) 부주면마찰력의 장기관측기법을 사용하면 부주면마찰력이 발생하고 있는 중이라도 적절한 상부구조물의 시공시기를 파악할 수 있어 경제적인 시공관리가 가능한 것으로 판단된다.

고속도로 건설 및 유지관리 과정중 발생되는 폐콘크리트를 현장파쇄하여 생산한 재생골재를 도로 포장용 재료로 활용하기 위한 시험시공을 실시하였다. 동상방지층의 경우 재생굵은골재, 스크리닝스 및 모래를 소요입도로 혼합하였을 때 양호한 지지력을 나타내었으며 강도가 약한 모르터가 진동 및 전압에 의해 파쇄됨에 따라 재생골재 2~20mm 통과율이 5~13%정도 증가하였다. 재생골재를 사용한 빈배합 콘크리트의 강도는 천연쇄석에 비하여 71~85% 강도를 나타내었으나 배합강도 57.5kgf/cm2를 크게 상회하였으므로 현장적용에는 문제없음을 확인하였다.

In order to verify the strength of slurry shotcrete compared to existing shotcrete, The results were analyzed and evaluated.

By analyzing the compressive strength througth field test execution on the shotcrete mixture with 40% blast furnace slag and slurry accelerator, confirmed the suitability as subsea tunnel material. As a result, strength characteristic on the anti-chloride shotcrete is excellent evaluated in terms of compressive strength compared with existing shotcrete.

By analyzing the compressive strength througth field test execution on the shotcrete mixture with 40% blast furnace slag and slurry accelerator, confirmed the suitability as subsea tunnel material. As a result, strength characteristic on the anti-chloride shotcrete is excellent evaluated in terms of compressive strength compared with existing shotcrete.

The field test was conducted for the shotcrete construction using a slurry-type accelerator. Check the efficiency of the equipment and the accelerator was determined using the discharge amount for the accelerator ratio optimization. As a result, the efficiency of a slurry quick-setting admixture mix shotcrete and discharge rate results were evaluated to be excellent.

In this study, the field construction with the prefabricated lightweight plastic foundation using recycled plastic forsewage pipeline and triple wall PE sewer pipe was carried out to verify the construction workability of prefabricated plasticfoundation and deformation resistance potential of triple wall PE sewer pipe. The construction procedure in field wasfollowed the KS standard. The measured vertical deformations of PE pipe are average 2.35mm which means around 1%of deformation for 300mm diameter of PE pipe. Judging from the type of foundation, the use of plastic foundation (CaseB & Case C) showed lower deformation due to differential settlement than that of sand bedding foundation. Especially,the plastic foundation made a relatively uniform deformation of PE pipe. However, the sand foundation represented thenon-uniform deformation of PE pipe.