A parametric study was carried out to gain an insight about structural performances considering abnormal behavior effects in high strength steel pipe strut system. Six load cases were considered as undesirable deflections of strut structures, which are basic load combination, excessive excavation situations, impact loading effects, additional overburden loads, load combinations, and 50% reduction of strut length. Subsequent simulation results present various influences of parameters on structural performances of the strut system. Based on the results, we propose methods to prevent unusual behaviors of pipe-type strut structures made of high strength steels.

Concrete using recycled aggregate instead of natural aggregate reduces environmental waste and is a future oriented material. However, use of the structure is limited to negative recognition of recycled aggregate quality. In this study, 50 MPa concrete was developed using recycled aggregate. In order to verify the possibility of using as a column member, we aimed to confirm the compressive behavior of RCFT (Recycled Concrete Filled Tube) columns filled with concrete using recycled aggregate. Circular type steel pipe was used, and concrete strength (30, 40, 50MPa) and mixing ratio were the experimental parameters. Through 72 specimen compression tests, 50MPa strength of recycled aggregate concrete was confirmed and stable behavior of 9 RCFT columns was confirmed.

As the corrugated steel pipes has many advantages to compensate for the shortcomings of the concrete fume pipes, it has been widely used for culverts and drain trenches. However, when corrugated steel pipes used as a sewage pipe or in an environment exposed to sea water, corrosion can cause problems and degradation of the function of pipe. So, Composite Corrugated Steel Pipe(CCSP) coated with three layers were developed to compensate for the shortcomings and improve performance of corrugated steel pipes. The composite material used in fabrication of the CCSP consists of a three layer polymer protective coating on both sides of a steel sheet core. To verify the field application of the CCSP, a test was conducted on the resistance of the strain, stability of connections, water flow performance and durability to determine whether they meet KS quality and various design standards.

This study performs finite Element stress analysis of flange connections at noise barriers with circular steel tubes, which have a light weight. Subsequent numerical simulation results for three types of models (standard, double, and standard models strengthen by ribs) present that the applied connections for target noise barriers constructed show suitable structural performance. In this paper, the existing finite element stress analysis using the ABAQUS program is further extended to study the local stress distribution of the noise barriers with new type circular steel tubes. The numerical results for various parameters are verified by comparing different types with stresses occurred in the noise barrier from the numerical simulation.

The objective of this study is to propose a simple and accurate analytical model for HSS braces. For this purpose, a physical theory model is adopted. Rectangular hollow section steel (HSS) braces are considered in this study. To accurately simulate the cyclic behavior of braces using the physical theory model, empirical equations calculating constituent parameters are implemented on the analytical model, which were proposed in the companion paper. The constituent parameters are cyclic brace growth, cyclic buckling load, and the incidence of local buckling and fracture. The analytical model proposed in this study was verified by comparing actual and simulated cyclic curves of brace specimens. It is observed that the proposed model accurately simulates the cyclic behavior of the braces throughout whole response range.

The cyclic behavior of braces is complex due to their asymmetric properties in tension and compression. For accurately simulating the cyclic curves of braces, it is important to predict the major parameters such as cyclic brace growth, cyclic buckling load, incidence local buckling and fracture with good precision. For a given brace, the most accurate values of these parameters can be estimated throughout experiments. However, it is almost impossible to conduct experiments whenever an analytical model has to be established for many braces in building structures due to enormous cost and time. For avoid such difficulties, empirical equations for predicting constituent parameters are proposed from regression analyses based on test results of various braces. This study focuses on rectangular hollow structural section(HSS) steel braces, which have been popularly used in construction practice owing to its sectional efficiency.

All structures can not be perfect due to geometric or material initial imperfections. Initial imperfections are an important factor in determining the buckling mode and are known to be important factors in evaluating the actual buckling strength. The DNV-RP-C202 design standard limits the longitudinal stiffener spacing. However, the criteria for the stiffener spacing presented in DNV-RP-C202 is a guideline derived from the curved panel theory of perfect cross-sectional shape without initial imperfections. In this study, considering geometric initial imperfections, the transition point of stiffener spacing where longitudinal stiffeners affect the buckling strength of reinforced steel wind turbine tower is analyzed using finite element analysis program. The results of finite element analysis compared with theoretical results based on the perfect shape. As a result, a more reasonable stiffener spacing considering the initial imperfections was suggested.

Structures of steel frame buildings getting vary depending on the development of construction technology. Fire-resistant steel beams and Columns accredited by accreditation bodies from the performance of various fire-resistant coating is applied to the current pillar method is most H-beams. H-beam has been proposed a non-load test specifications in the relevant regulations, its scope of accreditation to be granted without limitation of size H-beams from the performance of the test specification. However, in the case of the rectangular steel structure is to check its performance and to a separate one of the receive acknowledge and so take advantage of the cross-sectional shape factor in this study to test the performance of the fire-resistant structure proposed for standard test specimen.

The steel I-girder inserted circular steel pipe is a new structural cable-anchorage system that the circular guide pipe is connected and welded to the web of the I-girder for cable-stayed bridge. This guide pipe-anchor system has many merits of the structural and aesthetic performances. However, there has been little research into the behavior mechanism with respect to anchor angles and the strengthening methods against the sectional area reduction caused by the penetration of guide pipe. Therefore, this paper investigates an experimental behavior of the steel I-girder with circular steel tube which is fabricated 1/3 scale model as fundamental study to examine the flexural behavior and failure mode in the laboratory. Based on the comparison of test results and nonlinear FE analyses, it is found that FEM is suitable to estimate the stiffness of I-girder with circular tube in order to design the cable-stayed bridge.

This paper presents a foundation pile to steel column connection that can resist large magnitude of moment and that can be easy installed. The developed joint has spherical shape and it is given the name HAT joint to mean Hallow half-sphere steel joint. Four types of HAT joints are developed. Namely, H-type, T-type, P-type and K-type. In this paper I will talk about the performance assessment of T-type(Tube Column) and P-type(Pile Column) of HAT joints with finite element analysis and experiment on a full scale model is presented.

So far, square concrete filled tubular(CFT) columns have been used in a limited width thickness ratio. The reason is that local buckling occurs in steel tube easily. Once the local buckling occurs, the confinement effect of steel tube on concrete disappears. In this study, we developed welded built-up square steel tube with reinforcement which are placed at the center of the tube width acts as an anchor. 3 specimens of slender welded built-up square CFT columns and 3 specimens of slender welded built-up square steel tube columns were manufactured with parameters of width(B) of steel tube, width thickness ratio(B/t). we conducted a experimental test on the 6 specimens under eccentric load, and evaluated the structural resistance and behavior of 6 specimens.

본 논문에서는 CFT 구조의 강관과 내부 충전 콘크리트 간 복합거동을 유한요소해석 시 적절하게 반영하기 위해 강관과 콘크리트 간 부착 슬립관계 묘사를 위한 알고리즘을 제시하였다. 내부 충전 콘크리트에 축방향 하중 발생 시, 강관과 콘크리트 간 마찰로 인해 강관으로 하중이 전달되며, 이에 따른 강관 슬립량과 힘의 평형관계를 통해 등가강성을 통해 부착관계를 파악할 수 있다. 실제 원형 CFT 부재의 부착응력 실험을 통해 측정된 수직 및 수평 방향 응력 분포 결과와 제안된 해석 기법을 통해 산정된 응력 분포의 비교를 통해 제안된 해석 기법의 타당성을 검증하였다. 또한 비선형 유한요소해석 시 강관과 콘크리트의 부착 거동 묘사에 따라 CFT 기둥의 거동 특성에 영향을 미치게 되므로 축방향 하중이 작용하는 CFT 부재 실험결과와 제안된 부착-슬립 모델을 반영한 유한요소해석 결과의 하중-변위 곡선 관계 비교를 통해 제안된 기법의 적합성을 검증하였다.

In Part I, we disccussed of joint between PHC pile and steel column in foundation of large space structures, one prototype of a joint of PHC pile to steel pipe column was suggested on the basis of analytical studies. In this paper, I explain the Joint of PHC pile to steel tube column and more detail of analysis

To overcome disadvantages of usual spread foundation in large space structure, some prototypes of a joint of the PHC pile to steel pipe column that directly connects a column to a PHC pile are analytically studied. With the consideration of strength requirement and stress concentration of joint of the PHC pile to column, we suggest the most appropriate one.

본 연구에서는 테이퍼 보에 대한 미분방정식의 일반해에 캔틸레버 보의 경계조건을 적용하여 모드특성을 추정한다. 또한, 휨을 받는 테이퍼 원형강관 캔틸레버 보에 발생하는 관통균열을 모델링하기 위하여 에너지 방법을 이용하여 균열보에 대한보 길이방향 휨강성을 구한 후 이를 이용하여 테이퍼 원형강관 캔틸레버 균열보에 대한 고유주파수와 모드형상을 추정한다. 보 길이에 따른 균열보의 휨강성 변화는 기존 연구에서 밝혀진 현상과 유사하게 합리적인 양상을 보였으며, 유도한 휨강성을 적용하여 산정한 균열보의 고유주파수는 균열 크기가 증가할수록 감소함을 확인하였고, 모드형상은 균열발생에 의해 변화함을 알 수 있었다. 연구결과는 향후 테이퍼 원형강관 캔틸레버 보 형태의 타워 구조물에 대한 진동기반 균열탐지에 활용될 수 있을 것으로 판단된다.

선박은 박판으로 구성되어 있는 판구조물이며 사고하중을 받으면 압괴, 마찰접촉, 찢김, 대변형 등 같은 복잡한 비선형 거동을 경험하게 된다. 이런 구조물의 붕괴거동을 해석적인 방법으로 평가하기란 매우 힘들며 일반적으로 실험 및 외연적 시간적분을 이용하여 구조물의 압괴·충돌강도를 추정하고 있다. 이 논문에서는 내연적 시간적분, 외연적 시간적분 결과를 비교하여 합리적이고 효과적인 해석기법을 제안하고자 한다. 이번 수치 시뮬레이션 간 범용 유한요소해석

The law(construction standard specification, construction, standard-work regulation, Industry safety standard related regulation) related to the installation of scaffolding being used commonly on the construction site is regulated that the gap of ledger is within 1.5m and first ledger is within 2m. The gap of ledger here is essential for the stability of scaffolding structure. But it is determined that it is possible for the gap of ledger is applied by explaining safety handrail as ledger, because of the fact that in current, on the construction site, safety handrail is installed with the material of scaffolding ledger as a steel tube pipe. On this study, it is aimed to guarantee the safety by analyzing the ledger of scaffolding practically and prevent the accident of manager and laborer through the actualization.

재하속도에 따른 용접강관의 모멘트-곡률 거동특성에 관한 해석적 연구를 수행하였다. 3차원 열역학해석을 통하여 용접이음부의 잔류응력을 산출하였다. 그리고 동적소성모델이 적용된 탄소성 유한요소해석 프로그램을 이용하여 잔류응력을 고려한 용접강관(Welded pipe)의 동적해석을 수행하였다. 그리고 용접이음부가 없는 일반강관(Seamless pipe)에 대한 동적거동과의 비교를 통하여 해석을 수행하여 용접강관의 해석력과 해석결과는 용접강관의 모멘트가 일반강관의 모멘트에 비해 낮은 응답을 보였으나 재하속도가 증가함에 따라 모멘트 응답의 차이는 점차 감소하는 경향을 보였다.