The study is compressive strength of 110MPa PHC pile using ground granulated blast furnace slag to NAC, AC curing method. In the result, 20% of ground granulated blast furnace slag could be substituted for cement in PHC pile concrete.

In experimental results, the prediction equation for 28 day-strength of GGBF slag concrete could be produced through the linear regression analysis of early strength and 28 day-strength. In order to acquire the reliability, all mixture were repeated as 3 times and each mixture order was carried out by random sampling. The prediction equation for 28 day-strength of GGBF slag concrete by 1 day strength won the good reliability.

현재 전 세계적으로 자연적, 인위적 요인으로 인하여 이상기후가 나타나고 있다. 이상기후의 대표적인 것으로 슈퍼태풍, 극한폭설, 폭염과 같은 극한 기후현상이 초래된다. 1970년대 산업화 시대 이후 급격하게 지구의 온도가 상승하는 것을 알 수 있으며, 이로 인하여 발생하는 가장 큰 문제점은 지구 온난화이다. 지구 온난화에 영향을 미치는 온실가스의 종류로는 이산화탄소, 과불화탄소, 아산화질소, 메탄과 같은 다양한 종류의 화학성분이 존재하며 특히 이산화탄소가 약 90%의 비중을 차지하는 것을 알 수 있다. 콘크리트의 경우 건설재료로써 탁월한 내구성능을 지니고 있으며, 사회기반시설물 건설 재료로 70%이상 사용되고 있다. 그러나 콘크리트는 타설직후 물리·화학적으로 다양한 환경조건으로부터 성능저하 현상이 발생하기도 한다. 특히 대기중의 이산화탄소는 콘크리트 알칼리도 저하에 따른 철근을 부식시키고 내구성 저하를 초래하게 된다. 따라서 본 연구에서는 풍속, 일조시간에 관하여 양생 한 후 콘크리트의 탄산화 실험을 접목시켜 탄산화 깊이와 탄산화 속도 계수를 측정하고 이를 바탕으로 만족도 확률 곡선을 통하여 성능중심평가(Performance Based Evaluation(PBE))를 수행 할 것이다.

본 연구는 폴리머 기반 보수모르타르에 미분쇄된 플라이애시 치환율의 영향을 평가하였다. 주요변수는 양생온도와 미분쇄된 플라이애시의 치환율이다. 양생온도는 40℃, 20℃ 및 5℃로, 미분쇄된 플라이애시 치환율은 결합재 대비 0~35%로 변화하였다. 굳지 않은 모르타르에서는 플로우를, 굳은 모르타르에서는 재령별 압축강도, 응력-변형률 관계 및 탄성계수, 파괴계수를 측정하고, 주사전자현미경 및 엑스선회절기 분석을 수행하였다. 실험결과 보수모르타르의 플로우, 탄성계수 및 파괴계수는 미분쇄된 플라이애시 치환율 20~30%에서 가장 높은 성능을 발휘하였다. 또한 재령별 압축강도는 미분쇄된 플라이애시 치환율과 양생온도에 현저한 영향을 받았는데, 미분쇄된 플라이애시 치환율 20%에서 초기강도 발현율이 가장 높았다. ACI 209에서 제시하고 있는 콘크리트 재령별 압축강도예측모델에서 초기 및 장기재령 강도발현 계수는 미분쇄된 플라이애시 치환율과 양생온도의 함수로 일반화할 수 있었다. 미분쇄된 플라이애시가 첨가된 페이스트는 수화생성물을 나타내는 피크(peak)의 수와 강도(intensity)가 증가되고 플라이애시 입자주변에 CSH 겔이 형성되었다.

이 연구에서는 초고성능 콘크리트 (UHPC)와 보통 콘크리트 (NSC)간 계면부착강도에 관한 연구를 수행하였다. UHPC를 보수⋅보강재 로 활용하기 위한 기존의 부착강도에 관한 연구와 달리, UHPC를 프리캐스트 합성부재로 활용하기 위한 연구에 초점을 맞추었으며, 여기 에 영향을 미칠 수 있는 다양한 요인에 대하여 검토하였다. 기존 연구들을 분석한 결과, UHPC-NSC 계면 부착강도에 영향을 미칠 수 있는 요인으로는 계면의 형상, 합성 전 UHPC의 경화 진행상태, 합성 전 UHPC의 수분 흡수상태, 그리고 합성 후 양생장소와 같이 크게 4가지 로 구분되었다. 계면의 형상을 변수로 한 실험에서는 형상에 따라 각기 다른 파괴모드가 나타났으며, 기존 연구에서 확인되지 않았던 거칠 게 처리한 UHPC 계면 일부가 파괴되는 새로운 파괴모드가 발견되었다. 합성 전 UHPC의 경화진행 상태가 부착강도에 영향을 미치는 것 으로 나타났으며, 이러한 영향은 부착 파괴모드에 따라 다르게 나타났다. 또한, 합성 전 UHPC의 수분상태가 부착강도에 영향을 주었으며, UHPC의 양생방법에 따라 서로 상반되는 결과를 보였다. 마지막으로, 합성한 시편의 양생조건 역시 계면 부착강도에 영향을 미친다는 것 을 확인하였다.

In experimental results, the prediction equation for 28 day-strength of GGBF slag concrete could be produced through the linear regression analysis of early strength and 28 day-strength. In order to acquire the reliability, all mixture were repeated as 3 times and each mixture order was carried out by random sampling. The prediction equation for 28 day-strength of GGBF slag concrete by 1-day strength won the good reliability.

In this paper, evaluation of compressive strength development of concrete cured by microwave heating system is introduced. For this evaluation, core strength tests were conducted. Test results show that the development was accelerated by microwave heating system. And two parameters in a equation for predicting initial strength development were presented when using this system.

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of 40℃ (SS, FA) and 60℃ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of 40℃ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at 60℃, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of 40℃ in order to use sulfur polymer as the surface protecting material.

현재 전 세계적으로 석탄, 석유 등 화석연료의 사용으로 지구 온난화가 진행되고 있다. 이러한 원인으로 폭염, 폭설, 폭우 및 슈퍼태풍 등과 같은 이상기후, 극한기후 현상이 지속적으로 증가 하고 있다. 또한 심각한 자연재해로 콘크리트 구조물 및 사회기반시설의 심각한 손상과 붕괴가 발생한다. 이러한 문제들을 해결하기 위해서는 기후변화에 적합한 기준 및 시공 기술 등이 필요한 실정이므로 본 연구에서는다양한 온도와 습도 양생조건이 콘크리트 배합에 미치는 영향을 검토해 보았다. 다양한 온도와 습도 조건에서 양생된 콘크리트의 압축강도와 할렬인장강도 실험을 수행하였다. 또한 성능중심평가 (performance based evaluation (PBE))방법을 사용하여 다양한 양생조건에서 경화된 콘크리트 강도의 만족도확률을 평가하였다. 또한 콘크리트의 성능중심평가로부터 얻는 결과 값을 바탕으로 기후변화가 배합에 미치는영향을 고려하여 배합설계에 적용할 수 있다.

Carbon dioxide generated from construction materials and construction material industry among the fields ofconstruction is approximately 67million tons. It is about 30% of the carbon dioxide generated in the fields of construction.In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumedand decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in constructionmaterial industry. Therefore, this study produced an extrusion panel by using cement as the base materials and substitutingbinding materials up to 40% to analyze strength characteristics. According to the results of strength characteristics bythe replacement binder (Low energy curing Admixture) showed an apparent active strength improvement. In particular,specimens substituting binder as 45% indicated the greatest strength improvement. When binding materials was used withsubstitution, it showed strength characteristics similar or higher than specimens made from tertiary autoclave curing assecondary steam curing.

As global warming is higher by CO2, most of countries have an effort to develop CO2 reducing technology like a CO2 sequestration and a CO2 curing method using cement based materials. In this study, CO2 uptake rate and compressive strength were investigated when CO2 curing method was applied in cement mortar. The CO2 uptake rate was ranged from 10.1% to 11.6% by mass measurement method and from 6.2% to 16.3% by TGA method. This means that mass measurement method by electronic scale is more accurate than TGA method to estimate CO2 uptake rate. The early compressive strength of 1 hour CO2 curing specimens was higher than that of 1 hour atmospheric curing specimens, but lower than that of 5 hours steam curing specimens. 3 days and 7 days compressive strength of specimens by atmospheric curing and steam curing were increased both. But compressive strength of 1 hour CO2 curing specimens was lower than that of other two curing methods.

Theoretical modeling is presented for the prediction of prestress loss of strands during the steam curing process. The model comprises heat transfer model, bond-slip model at elevated temperature and micromechanical model for prestress loss. The model was able to predict the experimentally measured prestress loss in a reasonable accuracy.

본 연구에서는 순환골재 콘크리트의 성능에 대한 양생방법의 영향에 대하여 실험적으로 고찰하였다. 순환골재 콘크리트 제조를 위하여부순골재에 순환골재를 0, 25, 50, 75 및 100%로 대체하였으며, 증기양생한 콘크리트의 압축 및 쪼갬인장강도, 투수공극, 염소이온 침투저항성 및 건조수축을 소정의 재령에서 측정하여 수중양생한 콘크리트의 성능과 비교하였다. 실험결과에 따르면, 양생방법에 관계없이 순환골재 대체율이 증가할수록 콘크리트의 역학적 성능은 감소하였다. 한편, 초기재령에서 증기양생된 콘크리트는 수중양생된 콘크리트와 비교하여 매우 우수한 성능을 나타내었다. 그러나, 장기재령 (28일)에서 증기양생의 효과는 초기재령에 비하여 두드러지게 나타나지 않음을 알수 있다. 결론적으로, 본 연구의 범위 내에서 순환골재 콘크리트의 성능향상을 위하여 증기양생법의 적용이 유용할 것으로 판단된다.

Carbon dioxide generated from construction materials and construction material industry among the fields ofconstruction is approximately 67 million tons. It is about 30% of the carbon dioxide generated in the fields of construction.In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumedand decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in constructionmaterial industry. Therefore, this study manufactured mortar by having cement as the base and substituting three bindingmaterials up to 50% and then adopted different curing methods to analyze congelation and strength characteristics. According to the result of strength characteristics by the types of binding materials and replacement ratio, the specimensubstituting ESA (Early Strength Admixture) and FPC (Fine Particle Cement) showed active strength improvement. Inparticular, the specimen substituting ESA as 25% indicated the greatest strength improvement, and as the number of curingincreased, the strength grew higher, too. And when the binding material was used by substitution, it showed strengthcharacteristics similar to or higher than the specimen conducting tertiary autoclave curing as the secondary steam curing.

This study investigates strength development of magnesia-phosphate cement considering curing temperature and W/B ratio. The results revealed that it showed an excellent strength development at early ago and the influence of curing temperature was within 25% on strength.

This study was carried out to evaluate effects of curing method and age on compressive behavior of steel fiber reinforced Alkali-Activated Slag(AAS) concrete. AAS and Steel Fiber Reinforced Concrete (SFRC) material with specific compressive strength of 30MPa was reinforced with 0% to 1% steel fibers at the volume fraction. Two types of curing methods were used: water curing and exposed curing. Curing time is 3, 7, 28 day. Experimental results indicated that compressive strength, elastic modulus, compression index.

This paper presents the prediction method of concrete strength according to curing methods for the quality control. Database and an artificial neural network were constructed and then the prediction program of concrete strength were developed.

Because ordinary concrete cannot be hardened well under sub-zero temperatures, anti-freeze agents are typically added to prevent the frost damage and to ensure the proper hardening of concrete. With the advantage of a rapid exothermic reaction property, jet set concrete may be used as a cold weather concrete because it can reach the required strength before being damaged by cold weather. Recent studies are reported that magnesia-phosphate composites can be hardened very quickly and hydrated even in low temperature, which can be used as an alternative of severe cold weather concrete in arctic regions. This study developed the magnesia-phosphate composites that can be used in severe cold regions and suggested an appropriate mixture design from the experimental results.

When manufacturing secondary concrete products, steam and autoclave curing are practiced for the purpose of securing product performance at early phase. CO2 is generated by combustion of fossil fuel at the time of curing. This study is part of a research conducted to minimize curing process which generates CO2. Combination materials types, substitution ratio, strength property per different types of curing are compared and evaluated. Result of the experiment indicates that combination material with 40%　blast furnace slag　substitution and W/B which has gone through 30,40% steam curing are the most outstanding experiment bodies.

During the steam curing process, some initial prestress is lost due to the effect of high temperature. Limited number of quantitive evaluation has been reported on thermal loss of tendon during steam curing process. In this study, a theoretical evaluation was derived for the amount of prestress loss in prestressed concrete member during steam curing process. The equation devide overall process to 3 stages : from initial state to bonding state between concrete and tendon; just before cutting; and after cutting. The evaluation predicted the amount of prestress loss in the order of 7% of initial prestress force by direct thermal effect through all curing procedures. To validate the equation which estimate the amount of prestress loss, experimental studies should be performed.