This study was conducted to develop a renewable and sustainable bio-material to replace polystyrene (EPS) in fungal-mycelium-based composite using agricultural by-products. Four mushrooms (Ganoderma lucidum, Fomitella fraxinea, Phellinus linteus, and Schizophyllum commune) were cultured in an oak sawdust plus rice bran substrate to select the mushroom with the best growth. The mycelia of G. lucidum showed the best growth. To investigate the optimal mixing ratio with spent mushroom substrate (SM) and oak sawdust (OS), samples were prepared by mixing SM and OS at ratios of 50%:50%, 60%:40%, and 80%:20% (w/w). Each substrate was then inoculated with G. lucidum. G. lucidum showed the best mycelial growth of 140.0 mm in the substrate with SM and OS mixed at a 60%:40% ratio. It was also found that the substrate with SM and OS mixed at a 60%:40% ratio had the best handling properties. The compressive strength of mycelial materials inoculated with G. lucidum was in the range of 300–302 kgf mm-1, and the materials were four times stronger than polystyrene materials. These results indicate that substrates comprising spent mushroom substrate mixed with oak sawdust can be successfully upcycled to mycelium-based composite materials using G. lucidum. This represents a sustainable approach.

Cucurbita is one of the crops with high demand in the world. Securing breeding sources is crucial and fundamental to any plant breeding program. This study was conducted to investigate the characterization of phenotypic traits and phylogenetic classification of germplasm provided by the National Agrobiodiversity Center of RDA. Fourteen phenotypic traits were measured in 199 accessions of Cucurbita germplasm. Among these germplasm, 92 accessions of C. moschata, 34 accessions of C. maxima, and 73 accessions of C. pepo were classified using the KASP marker from the Seed Industry Center. It was confirmed that there were five classifications in C. moschata, five in C. maxima and four in the C. pepo. The results of this study provide fundamental data on Cucurbita germplasm and are expected to be useful in breeding programs.

We conducted an on-site application study at the livestock cooperative fertilizer plant to compare the composting period, temperature change, moisture content, and chemical properties between livestock manure compost using sawdust as a moisture regulator with those using spent oyster mushroom substrate. The composting period, moisture content, and fertilizer composition of compost containing spent oyster mushroom substrate did not differ from that of conventional compost mixed with sawdust after the first and second fermentation and post-maturation stages, it was suitable as a material for manufacturing livestock manure compost. The spent oyster mushroom substrate also lower the production cost of livestock manure compost by replacing the more expensive sawdust. The developed technology is expected to contribute towards the utilization of by-products of the oyster mushroom harvest while simultaneously producing high quality livestock manure compost.

3-(2-브로모에틸)인돌을 사용한 2-에티닐피리딘의 4차염화 중합을 통해 새로운 이온성 폴리아세틸렌 유도체 를 합성하였다. 3-(2-브로모에틸)인돌을 사용한 2-에티닐피리딘의 중합은 균일하게 진행되었으며 비교적 높은 수율 로 중합체를 합성할 수 있었다(78%). 3-(2-브로모에틸)인돌에 의한 2-에티닐피리딘의 4차염화 반응에 의해 형성된 N-(3-에틸인돌)-2-에티닐피리디늄 브로마이드의 활성화된 아세틸렌 삼중 결합은 별도의 개시제나 촉매 없이도 중합 반응이 잘 진행됨을 알 수 있었다. 여러 가지 분석 장비를 이용하여 중합체의 구조를 확인한 결과 설계한 인돌 치 환기를 갖는 공액구조 고분자가 생성되었음을 확인할 수 있었다. 이 중합체는 DMF, DMAc, DMSO 등과 같은 극성 유기 용매에 잘 용해하였다. 중합체는 가시광선 영역인 457 nm에서 특징적인 흡수 피크, 600 nm에서 엣지 파장 을 보였다. 중합체의 사이클릭 볼타모그램은 산화와 환원 피크 사이에서 안정한 비가역적 전기화학 거동을 나타내 었다. 스캔 속도가 증가할수록 환원 전류량이 증가하였으며 주 환원 및 산화 피크는 -1.3 V 및 1.1 V에서 관찰되었 다.

Inorganic-organic composites find extensive application in various fields, including electronic devices and light-emitting diodes. Notably, encapsulation technologies are employed to shield electronic devices (such as printed circuit boards and batteries) from stress and moisture exposure while maintaining electrical insulation. Polymer composites can be used as encapsulation materials because of their controllable mechanical and electrical properties. In this study, we propose a polymer composite that provides good electrical insulation and enhanced mechanical properties. This is achieved by using aluminum borate nanowhiskers (ABOw), which are fabricated using a facile synthesis method. The ABOw fillers are created via a hydrothermal method using aluminum chloride and boric acid. We confirm that the synthesis occurs in various morphologies based on the molar ratio. Specifically, nanowhiskers are synthesized at a molar ratio of 1:3 and used as fillers in the composite. The fabricated ABOw/epoxy composites exhibit a 48.5% enhancement in mechanical properties, similar to those of pure epoxy, while maintaining good electrical insulation.

가상현실과 현실 세계를 융합한 공간으로서 가상의 세계 안에서 다양 한 상호작용과 경험을 제공하는 메타버스 서비스는 사용자들이 자아일치 성을 공유하고 강화하는 공간을 형성해줄 수 있다. 본 연구에서는 메타 버스 서비스 특성이 사용자의 재이용의도에 미치는 영향과, 이 관계를 매개하는 자아일치성의 효과를 검증하였다. 메타버스 서비스를 이용해 본 경험이 있는 성인 남녀를 대상으로 수집한 245개 설문자료를 분석한 결과에 따르면 메타버스 서비스 특성 중 실재감과 매개변수인 자아일치 성은 고객의 메타버스 재이용의도에 긍정적인 영향을 미치는 것으로 나 타났다. 또한 매개효과분석 결과에 따르면 자아일치성은 메타버스 서비 스 특성 중 실재감과 재이용의도 간의 관계를 부분매개하고, 유용성과 재이용의도 간의 관계, 상호작용성과 재이용의도 간의 관계를 완전매개 하는 것으로 나타났다. 연구 결과는 변화된 환경과 소비자 특성으로 인 해 전통적 브랜드 마케팅 방식의 한계에 직면하고 있는 기업들에게 메타 버스를 활용한 마케팅 전략 도출에 도움이 되는 유용한 정보를 제공하고 있다.

새만금호는 우리나라 최대의 인공호수로 호수의 수질은 갈수록 악화되어 가고 있어 호수의 특성에 맞는 새로운 수질관리 대 책이 필요하다. 이에 새만금호의 국가수질측정망 자료를 이용하여 통계분석 기법에 의한 새만금호의 시공간적 수질특성을 분석하였다. 수질항목간의 상관성에서 수온과 TP는 상관성이 있고, 염분과 TN, 그리고 pH와 COD가 상관성이 높았다. 그 외 항목들 간에는 낮은 상관 성을 나타내어 관련성이 낮았다. 주성분 분석을 이용한 새만금호의 공간적 수질특성을 보면, 크게 4개의 그룹으로 구분되었는데, 담수 영 향구역과 해수 영향구역, 해수와 담수가 혼합되는 중간 수역이 2개 그룹으로 구분되어 각각 다른 수질특성을 나타내었다. 주성분분석을 이용한 시간적 수질특성은 계절적으로 4가지 그룹으로 구분되었다. 그룹Ⅰ은 늦봄과 초여름에 해당되는 5, 6월이고, 그룹 Ⅱ는 계절적으 로 초봄(3, 4월)과 늦가을(11, 12월)에 해당되는 시기로 나타났으며, 그룹 Ⅲ은 낮은 수온에 의한 용존산소의 증가가 나타나는 계절인 겨울 철(1, 2월)의 수질 특성을 보였고, 그룹 Ⅳ는 하계(7, 8, 9, 10월) 성층의 발달로 저층 퇴적물의 높은 인농도와 하계 고수온의 상관성을 가지 는 그룹으로 구분되었다. 이는 새만금호가 인위적으로 조성된 호수로써 상류 만경강과 동진강의 유입 영향을 받는 것과 동시에 새만금 방조제에 설치된 가력과 신시갑문을 통한 외해수 유입의 영향을 받음으로써 수질의 변동요소가 달라진 것으로 평가된다. 새만금호의 목 표수질을 달성하기 위해서는 상류 유역의 오염원 관리 대책과 함께 새만금호의 수질관리 대책을 수립할 필요가 있다.

This study was carried out to examine the concentration and distribution characteristics of total airborne bacteria (TAB) and airborne mold in non-regulated public-use facilities. The arithmetic mean (AM) of the TAB in all facilities was 356.5 ± 419.3 CFU/m3, and the geometric means (GM) was 157.8 CFU/m3, which did not exceed the standard value of 800 CFU/m3. The highest concentration was 637.3 ± 372.0 CFU/m3 (GM: 534.9 CFU/m3) in the underground shopping mall. The AM of airborne mold in all facilities was 448.2 ± 429.6 CFU/m3 (GM: 285.4 CFU/m3), which did not exceed the standard value of 500 CFU/m3, but was close to it. In particular, subway station (AM: 661.5 ± 441.2 CFU/m3, GM: 540.0 CFU/ m3), large-scale store (AM: 587.6 ± 683.2 CFU/m3, GM: 297.8 CFU/m3), and private educational institute (AM: 528.8 ± 379.6 CFU/m3, GM: 373.7 CFU/m3) exceeded the standard. Operational taxonomic unit of 16S rDNA and ITS2 rDNA region was analyzed to profile bacteria and mold component in the air of the public-use facilities. As a result, Pseudomonas and Morganella are the major bacterial groups. Regarding mold, Aspergillus, Candida, Malassezia, and Penicillium are the major groups. Component of each airborne bacterial and mold groups varied depending on the type of public-use facilities.

We used the measurement data derived from a proton transfer reaction time-offlight mass spectrometry (PTR-ToF-MS) to ascertain the source profile of volatile organic compounds (VOCs) from 4 major industrial classifications which showed the highest emissions from a total of 26 industrial classifications of A industrial complex. Methanol (MOH) was indicated as the highest VOC in the industrial classification of fabricated metal manufacture, and it was followed by dichloromethane (DM), ethanol (EN) and acetaldehyde (AAE). In the industrial classification of printing and recording media, the emission of ethylacetate (EA) and toluene (TOL) were the highest, and were followed by acetone (ACT), ethanol (EN) and acetic acid (AA). TOL, MOH, 2-butanol (MEK) and AAE were measured at high concentrations in the classification of rubber and plastic manufacture. In the classification of sewage, wastewater and manure treatment, TOL was the highest, and it was followed by MOH, H2S, and ethylbenzene (EBZ). In future studies, the source profiles for various industrial classifications which can provide scientific evidence must be completed, and then specified mitigation plans of VOCs for each industrial classification should be established.

비대면 교육 플랫폼의 필요성은 COVID-19 팬데믹으로 가속을 받게 되었다. 코로나 바이러스의 확산을 막기 위하여 대한민국의 대다수 교육기관들은 등 하교를 최소화 하였으며, 수업 방식은 네트워크를 이용한 화상 회 의 형태로 변하게 되었다. 화상 회의 형태의 비 대면 교육 플랫폼은 교수자 및 학생들에게 정적인 상호작용 (Static Interaction)만을 지원하여 학생들의 적극적인 수업 참여를 유도 하지 못했으며, 교수자의 교육 방식에 큰 제한을 주어 수업의 질을 크게 낮추게 되었다. 본 논문에서는 학생들의 자율적인 수업 참여율을 높이기 위 하여 게임의 특성을 가지는 메타버스 형태의 Web 기반 비 대면 교육 플랫폼”Off-On Class”를 제안한다. ”Off-On Class”는 강남 수학의 힘 학원에서 비 대면 교육 플랫폼의 요구 사항을 분석하여 개발 및 시범 운영 을 하였다.

This study analyzed the flow inside floating seedling equipment for Scapharca subcrenata. Due to the aging society of fishing villages, it is impossible to continuously input the labor force. Therefore, it is necessary to improve efficiency. Scapharca subcrenata has high per capita consumption. It serves as an important aquatic food resource. Scapharca subcrenata culture tends to be highly dependent on the natural environment. Production of Scapharca subcrenata is difficult to predict with low stability. In the past, manpower directly installed bamboo nets in mudflats. The seedling equipment devised in this study is a floating type and can be freely moved on the sea according to the prediction of Scapharca subcrenata generation. The flow around the floating seedling equipment was analyzed by numerical analysis. The physical phenomena of the flow around the net inside the floating seedling equipment were visualized. As a result, the space between the floating seedling equipment and the bottom net and the space between the net groups showed a lower flow rate than the inlet flow rate. It is expected that the low flow rate of the floating seedling equipment will have a positive effect on the attachment of Scapharca subcrenata.

The bandgap characteristics of semiconductor materials are an important factor when utilizing semiconductor materials for various applications. In this study, based on data provided by AFLOW (Automatic-FLOW for Materials Discovery), the bandgap of a semiconductor material was predicted using only the material’s compositional features. The compositional features were generated using the python module of ‘Pymatgen’ and ‘Matminer’. Pearson’s correlation coefficients (PCC) between the compositional features were calculated and those with a correlation coefficient value larger than 0.95 were removed in order to avoid overfitting. The bandgap prediction performance was compared using the metrics of R2 score and root-mean-squared error. By predicting the bandgap with randomforest and xgboost as representatives of the ensemble algorithm, it was found that xgboost gave better results after cross-validation and hyper-parameter tuning. To investigate the effect of compositional feature selection on the bandgap prediction of the machine learning model, the prediction performance was studied according to the number of features based on feature importance methods. It was found that there were no significant changes in prediction performance beyond the appropriate feature. Furthermore, artificial neural networks were employed to compare the prediction performance by adjusting the number of features guided by the PCC values, resulting in the best R2 score of 0.811. By comparing and analyzing the bandgap distribution and prediction performance according to the material group containing specific elements (F, N, Yb, Eu, Zn, B, Si, Ge, Fe Al), various information for material design was obtained.

A beverage was developed using the Abeliophyllum distichum leaf (AL). The beverage was prepared by adding it to apple juice by concentration, and physicochemical quality, antioxidant activities, and sensory evaluation were measured. Soluble solid and reducing sugar content of the control were 12.57 °Brix and 11.40%, respectively, and there was no difference from the group with addition of the AL extract. However, pH was slightly increased upon addition of AL extract. Lightness and yellowness increased when AL extract was added. Verbascoside content was not detected in the control, but it increased as the concentration of AL extract increased. The contents of ascorbic acid and flavonoids were 5.38 and 20.42 mg%, respectively, and there was no significant difference between the groups. However, the content of polyphenols increased as the concentration of the AL extract increased. DPPH radical and metal ion scavenging activity were increased by addition of the AL extract, but there was no difference in the ABTS radical scavenging activity. As a result of the sensory evaluation, there was no difference from the control even wihen the AL extract was added; thus, it was considered that there was no problem with the degree of acceptability when added within about 300 ppm.

Microclimate analysis was conducted through actual measurement according to land use status in urban, and CFD analysis was conducted to analyze and predict the microclimate characteristics of urban, and compared and analyzed with the actual measurement results. It was measured in high-rise areas and parks, and the temperature of the park area was 0.4 to 0.6℃ lower, and the relative humidity was 1.0 to 3.0% higher. The correlation coefficient was obtained by comparing the results of the computational fluid analysis with the results of the computational fluid analysis at the actual location located within the CFD analysis area for validation. The seasonal correlation coefficients are all higher than 0.8, so it is judged that they can be applied to microclimate analysis in urban area. The computational fluid analysis was divided into three areas (low-rise, low and high-rise, and high-rise) centered on the A2 point. On average, the low-rise area was 0.1 to 0.4% higher than the high-rise area. In the low and high-rise area and high-rise area, the pith of buildings are wide, so the airflow is smooth, so it is judged that the temperature is relatively low.