The experiment was performed using the cleaning precipitator To investigate the absorption efficiency of the SOX/NOX of the aqueous ammonia solution. Concentration of the cleaning liquid is 0.1, 0.5, and 1.0% with increasing absorption efficiency has improved. However, the reaction shown only a difference in time. Absorption efficiency has improved in accordance with the gas residence time. When the direction of the same gas and the cleaning liquid is determined that there is the effect of increasing the residence time. The relative impact of SOX and NOX is this likely to react slower than SOX/NOX. The yield is determined to require

탄소흡수원으로써의 산림부문의 중요성이 점차 증가함에 따라 다양한 정책들이 고려되고 있다. 제한된 예산과 자원 여건 하에서 정책의 효율성을 추구하기 위하여 본 연구에서는 최고최저조정법을 이용하여 산림청의 10대 산림 탄소흡수원 증진 정책들의 우선순위를 결정하였다. 산림 분야 전문가 설문조사 결과, 산림경영방식 및 시업체계 개선, 조림 및 식생복구 확대, 산림바이오매스 에너지 활용 및 이용시설 증대, 임목수집 시스템 및 재활용 체계 개선, REDD+ 사업 참여 확대 순으로 중요한 것으로 나타났다. 이 연구 결과는 향후 국내 산림탄소흡수원 확충을 위한 정부 핵심 정책을 수행함에 있어서 우선순위를 정하는데 중요한 정보를 제공할 것으로 기대한다.

PURPOSES: This study investigates the mechanical performance of carbon-capturing concrete that mainly contains blast furnace slag. METHODS: The mixture variables were considered; these included Portland cement content, which was varied from 10% to 40% of the blast furnace slag by weight. The specimens were exposed to different conditions such as high N2 and O2 concentrations, laboratory conditions and high CO2 conditions. Mechanical performances, including compressive and flexural strengths and carbon-capturing depth, were evaluated. RESULTS : The slump, air content and unit weight were not affected significantly by the variation in cement content. The strength development when the specimens were exposed to high purity air was slightly greater than that when exposed to high CO2. As the cement content increased the compressive and flexural strength increased but not considerably. The carbon-capturing capacity decreased as the cement content increased. The specimens exposed in the field for 70 days had flexural strength greater than 3 MPa. CONCLUSIONS : The results indicate that cement content is not an important parameter in the development of compressive and flexural strengths. However, the carbon-capturing depth was higher for less cement content. Even after field exposure for 70 days, neither any significant damage on the surface nor any decrease in strength was observed.

본 연구는 변화하는 환경에서 기업 간 R&D협력과 제품혁신과의 관계를 실증분석 한다. 더 나아가 R&D협력의 유형을 공급사슬상의 협력(수직적 협력)과 경쟁사와의 협력(수평적 협력)으로 구분하여, 기업의 흡수능력과 R&D협력의 상호관계가 제품혁신에 미치는 영향을 규명해보고자 한다. 본 연구의 분석 자료는 한국 제조업 대상으로 진행된 기술혁신조사(KIS) 자료를 이용했다. 연구결과, 수직적 협력과 수평적 협력이 제품혁신이 정(+)의 관계가 있다는 기본 가설을 지지되었으나, 수평적 협력이 수직적 협력보다 제품혁신에 더 많은 영향을 미친다는 가설은 지지되지 않았다. 또한, 기업의 흡수능력을 잠재적 흡수능력과 실제적 흡수능력으로 구분하여 R&D협력과의 상호작용이 제품혁신에 미치는 영향은 차이가 나타났다. 잠재적 흡수능력과 수직적 협력의 상호작용효과는 제품혁신에 정(+)의 관계를 가졌지만, 잠재적 흡수능력과 수평적 협력, 실제적 흡수능력과 수직적 협력, 실제적 흡수능력과 수평적 협력은 유의하지 않은 것을 확인할 수 있었다. 본 연구는 선행연구에서 제시한 흡수능력을 세부적으로 분류함에 따라 흡수능력을 논의하고자 시도하였다는 점에서 의의가 있다.

분리막/흡수제 하이브리드 기술인 접촉막 공정은 CO2 분리 효율을 높일 수 있는 방안으로 주목 받고 있다. 기존의 고분자 분리막은 젖음 현상으로 인한 CO2 흡수 특성 감소의 문제가 제기되고 있다. 따라서 본 연구에서는 화학적, 열적 안정성이 뛰어난 세라믹 소재를 이용하여 중공사막을 제조하여 사용하였다. 또한, CO2 흡수 효율을 높이기 위하여 표면을 소수성으로 개질하고, 특성 변화를 확인하였다. 소수성 중공사막을 적용한 단일 분리막 흡수장치에서 운전 조건에 따른 CO2 흡수 특성을 확인하여 보았다.

This study proposed new method using FRP material for emergency earthquake recovery in a building, since the classical materials such as concrete and steel was difficult to construct and fabricate during and after an earthquake. Also, the characteristics of FRP materials was much light and stronger in comparison to other materials. Therefore, the seismic performance of frame structures subjected to an earthquake, using precast GFRP-Corrugated infilled panel was conducted in this study.

PURPOSES: In this study, alkali-activated blast-furnace slag (AABFS) was investigated to determine its capacity to absorb carbon dioxide and to demonstrate the feasibility of its use as an alternative to ordinary Portland cement (OPC). In addition, this study was performed to evaluate the influence of the alkali-activator concentration on the absorption capacity and physicochemical characteristics. METHODS: To determine the characteristics of the AABFS as a function of the activator concentration, blast-furnace slag was activated by using calcium hydroxide at mass ratios ranging from 6 to 24%. The AABFS pastes were used to evaluate the carbon dioxide absorption capacity and rate, while the OPC paste was tested under the same conditions for comparison. The changes in the surface morphology and chemical composition before and after the carbon dioxide absorption were analyzed by using SEM and XRF. RESULTS: At an activator concentration of 24%, the AABFS absorbed approximately 42g of carbon dioxide per mass of paste. Meanwhile, the amount of carbon dioxide absorbed onto the OPC was minimal at the same activator concentration, indicating that the AABFS actively absorbed carbon dioxide as a result of the carbonation reaction on its surface. However, the carbon dioxide absorption capacity and rate decreased as the activator concentration increased, because a high concentration of the activator promoted a hydration reaction and formed a dense internal structure, which was confirmed by SEM analysis. The results of the XRF analyses showed that the CaO ratio increased after the carbon dioxide absorption. CONCLUSIONS : The experimental results confirmed that the AABFS was capable of absorbing large amounts of carbon dioxide, suggesting that it can be used as a dry absorbent for carbon capture and sequestration and as a feasible alternative to OPC. In the formation of AABFS, the activator concentration affected the hydration reaction and changed the surface and internal structure, resulting in changes to the carbon dioxide absorption capacity and rate. Accordingly, the activator ratio should be carefully selected to enhance not only the carbon capture capacity but also the physicochemical characteristics of the geopolymer.

In this paper, a finite element dynamic simulation study was performed to gain an insight about the blast wall test details for the offshore structures. The simulation was verified using qualitative and quantitative comparisons for different materials. Based on in-depth examination of blast simulation recordings, dynamic behaviors occurred in the blast wall against the explosion are determined. Subsequent simulation results present that the blast wall made of high energy absorbing high manganese steel performs much better in the shock absorption. In this paper, the existing finite element shock analysis using the LS-DYNA program is further extended to study the blast wave response of the corrugated blast wall made of the high manganese steel considering strain rate effects. The numerical results for various parameters are verified by comparing different material models with dynamic effects occurred in the blast wall from the explosive simulation.

본 연구는 대표적 산업부산물인 고로슬래그를 활용한 탄소흡수용 도로재료 개발 연구의 일환으로 탄소 포집 활성화제로 규산나트륨 및 수산화칼슘을 사용한 콘크리트의 노출조건에 따른 압축강도 특성을 분석 하였다. 고로슬래그 중량대비 시멘트 첨가량을 10%에서 40%까지 10%씩 증가시켜 표 1의 배합표에 따라 압축강도 시험체를 제작하였다. 시험체는 촉진 탄산화시험기에서 CO2 10%(100,000ppm)의 조건 및 밀폐 챔버를 이용한 고순도 air 조건에서 90일까지 노출을 진행하였다. 그림 1 및 그림 2는 압축강도 측정결과 를 나타내고 있다.

In ground-based astronomical spectroscopic observations, there are many telluric absorption lines that are laid on the spectra of celestial objects. To study the physical properties of the celestial objects with these contaminated spectra, the telluric lines should be removed. A conventional method for removing the telluric lines is using the standard stellar spectrum as telluric line. In this paper, we introduce a technique to calculate synthetic telluric spectra and use them to remove telluric lines from a spectrum of a celestial object. We used Line-by-Line Radiative Transfer Model (LBLRTM) for calculating a synthetic spectrum and selected Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) model as atmospheric model. We apply our method to some spectra obtained by Bohyunsan Observatory Echelle Spectrograph (BOES) to show that the telluric lines are well removed from the observed spectra by our model within an accuracy of 2% which is close to the 1-sigma rms of the original spectra.

본 연구는 강원도 홍천군 운두령 일대에 설치된 잣나무 등 5개소 임목생장 모니터링구를 대상으로 생장변화를 구명하고, 탄소저장량 및 흡수량을 산정하고자 하였다. 임목생장 모니터링구에서의 각 수종별 단위면적(ha)당 연평균 임분재적 생장율은 잣나무 6.6%, 낙엽송 3.8%, 소나무 1.8%, 신갈나무 1.3%, 자작나무 0.7% 순으로 나타났다. 각 고정조사구의 단위 면적(ha)당 탄소저장량은 2004년과 2014년에 각각 활엽수인 신갈나무가 186.1 tC/ha, 200.0 tC/ha 로 가장 많고, 그 다음 소나무, 낙엽송 순이었다. 자작나무는 가장 적은 48.6 tC/ha, 55.2 tC/ha을 나타내었다. 연간 이산화탄소흡수량은 신갈나무(12.6 tCO2/ha/yr.), 낙엽송(12.1 tCO2/ha/yr.), 잣나무(11.3 tCO2/ha/yr.) 순으로 나타나 수종별 표준 탄소 흡수량 기준보다 모두 높은 수치를 보여 주었다. 실제 연평균 탄소흡수 증가율을 보면 상대적으로 신갈나무, 소나무에 비해 모니터링구 설치 당시 유령림이었던 잣나무(2.9%)와 낙엽송(0.6%)이 높게 나타났다. 이는 천연림 소나무와 신갈나무가 노령기에 접어들면서 어느 정도 생장이 둔화된 것으로 보인다. 고산지대 산림이라는 열악한 환경에도 불구하고 운두령의 산림은 수종별 전국적인 평균 탄소흡수량 기준과 비교하여 흡수량이 더 높아 이 지역에서의 산림도 여전히 충분한 탄소저감 기능을 갖고 있음을 알 수 있었다.

In order to understand the contribution of seaweed aquaculture to nutrients and carbon cycles in coastal environments, we measured the nutrients & carbon uptake rates of Porphyra yezoensis Ueda sampled at Nakdong-River Estuary using a chamber incubation method from November 2011 to April 2012. It was observed that the production rate of dissolved oxygen by P. yezoensis (n=30~40) was about 68.8±46.0 μmol gFW -1 h-1 and uptake rate of nitrate, phosphate and dissolved inorganic carbon (DIC) was found to be 2.5±1.8 μmol gFW -1 h-1, 0.18±0.11 μmol gFW -1 h-1 and 87.1±57.3 μmol gFW -1 h-1, respectively. There was a positive linear correlation existed between the production rate of dissolved oxygen and the consumption rates of nitrate, phosphate and DIC, respectively, suggesting that these factors may serve as good indicators of P. yezoensis photosynthesis. Further, there was a negative logarithmic relationship between fresh weight of thallus and uptake rates of nutrients and CO2, which suggested that younger specimens (0.1~0.3 g) were much more efficient at nutrients and CO2 uptake than old specimens. It means that the early culturing stage than harvesting season might have more possibilities to be developed chlorosis by high rates of nitrogen uptake. However, N & C demanding rates of Busan and Jeollabuk-do, calculated by monthly mass production and culturing area, were much higher than those of Jeollanam-do, the highest harvesting area in Korea. Chlorosis events at Jeollabuk-do recently might have developed by the reason that heavily culture in narrow area and insufficient nutrients in maximum yield season (Dec.~Jan.) due mostly to shortage of land discharge and weak water circulation. The annual DIC uptake by P. yezoensis in Nakdong-River Estuary was estimated about 5.6×103 CO2 ton, which was about 0.03% of annual carbon dioxide emission of Busan City. Taken together, we suggest more research would be helpful to gain deep insight to evaluate the roles of seaweed aquacul-ture to the coastal nutrients cycles and global carbon cycle.

The present study is aimed at examining in multilateral ways the structural relationship among technological orientation, market orientation and product development performance of manufacturing companies, which are deemed to be key factors for them to increase absorptive capacities. From the study, it was revealed that: First, in terms of the relationship between market orientation and absorptive capacities, it was made clear by the analysis that the market orientation sought after by manufacturing companies has influence upon their absorptive capacities. Second, with regard to the relationship between technological orientation and absorptive capacities of manufacturing companies, the analysis found that the technological orientation pursued by them affects their absorptive capacities. Third, as for the relationship between absorptive capacities and product development performance, the analysis made it clear that the absorptive capacities of manufacturing companies exerts influence upon their product development performance. Fourth, in respect to the relationship between market orientation and product development performance, it was concluded from the analysis that market orientation produces effect upon product development performances like technological innovation and acquisition of new technologies needed for product development. Finally, regarding the relationship between technological orientation and product development performance of manufacturing companies, it became obvious from the analysis that the technological orientation affects the product development performance.