Environmental treatment residues become valuable waste byproducts like biomass when an environmental infrastructure necessary for recycling is effectively developed. In this study, an environmentally friendly sewage sludge sorbent was developed in a sewage treatment plant by carefully processing the sewage sludge generated from sewage treatment plants. In order to increase the adsorption efficiency, coffee ground waste was added to the adsorbent as an additive and the adsorbate used in the adsorption experiments was acetaldehyde as organic waste. It could be found from the experiment that the adsorbent of the sewage sludge was adsorbed more easily at the carbonization temperature of 600℃. In addition, adsorption experiments showed that the breakthrough time reached to 85, 110, and 130 minutes at 3:1, 2:2, and 1:3, respectively, depending on the content ratio of the sewage sludge and coffee waste. Therefore, the amount of acetaldehyde adsorption increased with the increase in the amount of coffee grounds in the mixture. It could be also be found that the addition of the coffee grounds as an additive to increase the adsorption capacity of the sewage sludge adsorbent is advantageous for adsorption.

Sulfur copolymer (poly(S-r-CEA)) was synthesized via facile inverse vulcanization of elemental sulfur with 2-carboxyethyl acrylate (CEA). Polysulfide (PS) oligomer was soluble to common solvents including DMF, producing homogenous dope solution with PAN as filler. PS-PAN was electrospun resulting to nanofiber membrane effective for Hg2+ sequestration with recorded maximum capacity of 612 mg g-1 based on Langmuir model isotherm. Kinetics, selectivity and reusability were also evaluated. This work presents new and cheap yet effective material for heavy metal sequestration from contaminated water. This work was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (2015R1A2A1A15055407) and by the Ministry of Education (No. 2009-0093816).

본 연구에서는 고염/고방사성 폐액 내 함유된 주요 고방사성핵종인 Cs 제거를 목적으로 고효율의 복합 흡착제(potassium cobalt ferrocyanide (PCFC)-loaded chabazite (CHA)) 합성 및 이의 적용성을 평가하였다. 복합 흡착제는 Cs을 비롯한 다 른 입자를 수용할 수 있는 CHA를 지지체로 선정하였으며, CoCl2 및 K4Fe(CN)6 용액의 단계적인 함침/침전을 통해 PCFC를 CHA 세공 내에 고정화함으로써 합성하였다. 복합 흡착제의 합성 시 평균 입자크기가 10 ㎛ 이상의 CHA를 지지체로 사용할 경우, PCFC 입자는 안정적인 형태로 고정화되었다. 또한, 합성 시 복합 흡착제의 정제를 증가시키는 세척 방법을 최적화함으로써, 복합 흡착제의 물리적 안정성이 향상되었다. 최적의 합성법을 통해 얻은 복합 흡착제에 의한 Cs 흡착 시, 담수(무염 조건) 및 해수(고염 조건)에서 모두 빠른 흡착 속도를 보였으며, 염 농도와 무관하게 비교적 높은 분배계수 값(104 mL·g-1 이상)을 나타내었다. 그러므로, 본 연구에서 합성한 복합 흡착제는 CHA 및 PCFC가 각각 가지고 있는 물리적 안정성과 Cs 에 높은 선택성 등을 고려하여 촤적화한 소재이며, 고염/고방사성폐액에 함유되어 있는 Cs을 고효율로 신속하게 제거할 수 있음을 알 수 있다.

정수슬러지를 탄화 및 활성처리하여 흡착제를 제조하였으며, 이를 이용한 황화수소 흡착특성을 고찰하였다. 제조 된 흡착제에 대한 BET측정 및 SEM 등 물성분석을 실시하였으며, 황화수소를 대상으로 회분식의 흡착평형실험 을 실시하였다. 실험변수로는 활성처리시 적용되는 약품종류 및 농도 등이 적용되었다. 실험결과, 정수슬러지는 탄화나 약품첨착과정을 통해 커다란 성능 향상이 이뤄짐을 알 수 있었다.

The potential use of UV-TiO2 photocatalytic oxidation absorbent reactor in the removal of gaseous formaldehyde was studied. This study was conducted inside a bench-type circulation reactor chamber at ambient air conditions. PCO (Photocatalytic Oxidaion) degradation test for formaldehyde was done repeatedly and the average was reported. It was evident that photocatalytic oxidation was proven to be an effective method to control indoor air pollutants, like formaldehyde in indoor air. However, by-products are produced in the case of formaldehyde degradation also CO2, CO, H2O and formic acid are produced. These by-products can inhibit the active site of the photocatalyst. Thus, addition of adsorbent succeeding the PCO-TiO2, acts as a secondary treatment wherein produced by-products from the degradation and unreacted HCHO will adhere to the surface of the adsorbent. In this study, synthetic zeolite and activated carbon pellets were used to control of by-products of formaldehyde. PCOTiO2 degradation alone achieves 86% for a period of 60 minutes. Addition of adsorbent improves the removal efficiency achieving 90% and 96% using activated carbon pellet and zeolite, respectively.

In this study, We evaluated the efficiency of the smart ventilation system being developed at the test-bed(KCL). Smart ventilation system improve the indoor air quality by absorbing carbon dioxide. It is reducing the infusion of outside air can be reduced to minimum energy consumption. To evaluate the energy savings and carbon dioxide removal efficiency. It was more effective when working with air conditioning and ventilation system at the same time.

H2S adsorption characteristics of adsorbent made by coffee waste were investigated. For analyses of the manufactured adsorbent, various methods such as scanning electron microscope(SEM), measurements of BET(Brunauer Emmett Teller) surface area, pH, and Iodide adsorption were adopted. As major adsorption characteristics, adsorption equilibrium capacity was measured by using a batch type experimental apparatus for operating variables such as adsorption temperature(25～45℃), adsorbent types. The experimental result showed that the H2S adsorption equilibrium capacity of adsorbent made by coffee waste much more increases with steam activation for the coffee waste.

Wastewater from textile industries is a major cause of water pollution in most developing countries. In order to address the issues of water pollution and high cost for treatment processes, the use of an inexpensive and environmentally benign adsorbents has been studied. The objective was to find a better alternative to the conventional methods. Lemon grass waste (ash) collected from a lemon grass stream distillation subunit in Bhutan was tested for dye removal from aqueous solutions. The study investigated the removal of methylene blue using the following operational parameters: initial concentration (100-600 mg/L), contact time, adsorbent dose (0.1-0.55 gm/100 mL), and pH (3-10). It was found that the percentage removal of dye increased with a decrease of the initial concentration and increased contact time and dose of adsorbent. The basic pH solution of dye showed better adsorption capacity as compared to the acidic dye solution. Langmuir and Freundlich adsorption isotherms were fitted to the data well. Data fitted better to Lagergren pseudo 2nd order kinetics than a 1st order kinetic model. Surface morphology was also examined via scanning electron microscopy. An elemental analysis was also carried out and the chemical composition and functional groups were analyzed using energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy techniques, respectively. The obtained results indicate that lemon grass ash could be employed as a low cost alternative to commercial activated carbon in wastewater treatment for the removal of dyes.

H2S adsorption characteristics of adsorbent made by fallen leaves were investigated. For analyses of the manufactured adsorbent, various methods such as scanning electron microscope(SEM) and measurements of BET surface area were adopted. As major adsorption characteristics, adsorption equilibrium capacity was measured by using a batch type experimental apparatus for operating variables such as adsorption temperature(25~45℃) and adsorbent types. The experimental result showed that the H2S adsorption equilibrium capacity of adsorbent made by fallen leaves decreased with increasing adsorption temperature due to physical adsorption phenomena. It was also found that the H2S adsorption capacity of the adsorbent increased remarkably by an acid treatment with HCl solution.

Most heavy metals are well-known toxic and carcinogenic agents and when discharged into wastewater represent a serious threat to the human population and the fauna and flora of the receiving water bodies. The present study aims to develop a procedure for Pb (II) removal. This procedure is based on using powdered activated carbon, which was prepared from walnut shells that were generated as plant wastes and modified with potassium carbonate and phosphoric acid as chemical agents. The main parameters, such as effect of pH, effect of sorbent dosage, Pb (II) concentrations, and various contact times influence the sorption process. The experimental results were analyzed by using Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich adsorption models. The kinetic study of Pb (II) on activated carbon from walnut shells was performed based on pseudo- first order and pseudo- second order equations. The data indicate that the adsorption kinetics follow the pseudo- second order rate. The procedure was successfully applied for Pb (II) removal from aqueous solutions.

Most heavy metals are well-known toxic and carcinogenic agents and when discharged into wastewater represent a serious threat to the human population and the fauna and flora of the receiving water bodies. The present study aims to develop a procedure for Pb(II) removal. The study was based on using powdered activated carbon, which was prepared from walnut shells generated as plant wastes and modified with potassium carbonate or phosphoric acid as chemical agents. The main parameters, such as effect of pH, effect of sorbent dosage, Pb(II) concentrations, and various contact times influence the sorption process. The experimental results were analyzed by using Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich adsorption models. The kinetic study of Pb(II) on activated carbon from walnut shells was performed based on pseudo-first order and pseudo-second order equations. The data indicate that the adsorption kinetics follow the pseudo-second order rate. The procedure was successfully applied for Pb(II) removal from aqueous solutions.

본 논문은 다양한 시설내에 적은 농도의 CO2 제거를 위한 선택적 CO2 흡수능력을 향상시킨 흡착제의 효율평가에 관한 것이다. 직경 4mm의 구형 흡착제는 시판용 제올라이트에 첨가제, 물, 바인더, LiOH를 섞어 제조하였다. 칼럼테스트에서 400분 이내에 90% 이상의 CO2흡착효율을 나타내었고, 흡착필터모듈 흡착능력을 평가하기 위해 회분식과 연속식타입의 챔버테스트가 시행되었다. 회분식테스트에서 30분 이내에 약 92%의 CO2가 제거되는 것을 확인하였다. 연속식테스트에서 30분 이내 70%의 CO2가 제거효율을 보였으며, 2,500ppm 이상의 CO2가 제거되는 것을 확인하였다. 재현성테스트를 수차례 수행한 결과 15일동안 1,000ppm 이상의 CO2가 연속적으로 제거됨을 보였다. TGA 분석법을 이용한 흡착량 분석에서 흡착제 g당 5.0mmol의 CO2를 흡착하는 것으로 나타났다. 본 연구에서 개발된 흡착제는 상온에서 저농도 CO2 실내환경에 적용가능한 것으로 판단된다.

H2S adsorption characteristics of adsorbent made by drinking water treatment sludge were investigated. For analyses of the manufactured adsorbent, various methods such as scanning electron microscope(SEM), measurements of BET surface area were adopted. As the major adsorption characteristic, breakthrough curve was measured by using a continuous fixed bed adsorption column for operating variables such as aspect ratio(L/D, 3∼9), gas flow rate(0.2∼1.0 liter/min) and type of samples. The experimental results showed that the breakthrough pint decreased with increasing gas flow rate, but increased with increasing aspect ratio. It was also found that the physical and chemical treatments of drinking water treatment sludge are very important for the improvement in H2S adsorption capacity due to property changes of the sludge.

Treatment characteristics of benzene were investigated by using a fixed bed reactor system applying a hybrid method over composites of photocatalyst and adsorbent. Various composites were made by mixing photocatalyst with adsorbent, such as activated carbon, activated carbon fiber, and sludge. Performance tests were conducted with benzene concentrations of 1,000～3,000 ppm, Benzene flow rates of 50～100cc/min, and packing weights of 14～24g for the various composite samples. The property of benzene treatment was analyzed concerning BET, SEM, pH, and the conversion efficiency. It was concluded by experimental results that the benzene conversion efficiency of a hybrid method was much higher than that of a photocatalyst only method showing a conversion efficiency range between 13% and 65%. It was also found that the comprehensive feasibility study of the hybrid method would be needed with consideration of various factors including additional expenses.

In the present study Sisal fiber obtained from the leaves of Agave sisalana has been chosen to validate its viability as an adsorbent for the removal of Nickel from aqueous solutions. The material was also surface modified and its effect on adsorption of Nickel was also studied. Agave sisalana fiber was found to be a cheap and effective adsorbent doing away with the need to activate the material therby reducing processing cost. The equilibrium studies indicated that the adsorption capacity of raw fiber and the surface modified fiber was 8.66 and 9.77 mg/g respectively with the Langmuir isotherm describing the adsorption phenomena better than the Freundlich and Temkin isotherm. The adsorption was found to be exothermic from the thermodynamic studies and the kinetics showed that the adsorption phenomena were second order.

Adsorption is one of the most efficient method for the separation of low level carbon dioxide. In order to enhance the adsorption capacity, a few additives such as alkali hydroxides were combined with the zeolitic sorbents. As a result of the experimental examination by applying the CO2 flow of 3000 ppm, the composite sorbent showed the improved quality to a certain degree and the added binder was also found to contribute to better adsorption.