A telesounder is a device that can monitor the appearance of fish in the sea on land and store fish detection data. This study was conducted to monitor the appearance of fish resources in coastal or near seas by using LTE communication for data transmission of the telesounder. The purpose of this study was to develop a prototype telesounder that can monitor the appearance of fish groups in the waters about 50 km away from the coast and store fish detection data. In this study, the prototype telesounder including a fish finder, communication device and battery for stable operation at sea was developed. The stability of telesounder buoy, data transmission/reception and expected use time were investigated. The expected use time of the telesounder using LTE communication with a lithium battery (12 V, 120 Ah) was about 274 hours under the conditions of 10 minutes off and 10 minutes on, about 520 hours under the conditions of 30 minutes off and 10 minutes on, and about 142 hours under continuous conditions. As a result of the sea test, it was found that the telesounder can be used in the sea area moved about 34 km from the land and the telesounder buoy was evaluated to have secured basic stability (buoyancy balance, waterproof, antenna strength, etc.) for operation in a marine environment.

The technology competitions of automobile manufacturers are getting hot. The characteristics of the environment friendly automobile are not only lowering the emission of harmful exhaust gas through the change of the power source, but also paying great attention to improvement of the power efficiency. As the market for pure electric vehicles continues to grow, we have analyzed the global technology competitiveness by DCT (Dual Clutch Transmission) patents. Clustering can be classified into five types ; 1) a cluster associated with a dual clutch transmission system, 2) a cluster of a torque transmission device and a reverse speed ratio, 3) a cluster of co-planar sets and dual clutch assemblies related to transmitting devices, 4) Device clusters, and 5) a cluster of synchronizers and clusters to prevent simultaneous operation of dual clutch transmissions. In recent years, demand for pure electric vehicles has been rapidly increasing, and patent applications related to DCT have been steadily increasing for energy efficiency of motor power sources.

본 연구에서는 가축전염병의 전국적 확산에 직접적으로 관련이 있는 축산차량 이동 상황을 파악하고자 국가동물방역통합시스템(KAHIS)에서 보유하고 있는 축산차량 이동 데이터를 이용하여 현재 운영 중인 도축장의 서비스 범위를 분석하였다. 축산차량 이동 데이터는 2014년 기준으로 1년에 3,200만 건 이상 생성되는 빅데이터(big data)이다. 분석결과 개별 도축장의 서비스 범위는 각 도축장의 거래처와 주변 소비시장의 입지 등에 따라 전국적인 범위로 형성되어 있음을 확인할 수 있었다. 이러한 결과는 가축 질병이 발생하는 순간 이미 질병의 전파 범위가 전국단위가 될 수 있음을 의미한다. 본 연구 결과는 전염성이 높은 가축질병이 발생할 경우 차단방역의 범위를 설정하는 정보로 활용될 수 있으며, 가축 질병 가상방역훈련(CPX)을 위한 기초자료로도 활용될 수 있다. 분석 도구로는 데이터분석으로 특화된 R과 공간분석 도구인 GIS를 활용하였다.

This paper describes the development of algorithm for direct data transmission between Raw VLBI Data Buffer (RVDB) and Huge Capacity Data Server (HCDS) operated in Korea-Japan Correlation Center (KJCC). The transmitted data is the VLBI observation data, which is recorded at each radio telescope site, and the data transmitting rate is varying from 1 Gbps, in usual case, upto 8 Gbps. The developed algorithm for data transmission enables the direct data transmission between RVDB and HCDS through 10 Gbps optical network using VLBI Data Interchange Format (VDIF). Proposed method adopts the conventional UDP/IP protocol, but in order to prevent the loss of data during data transmission, the packet error monitoring and data re-transmission functions are newly designed. The VDIF specification and VDIFCP (VDIF Control Protocol) are used for the direct data transmission between RVDB and HCDS. To validate the developed algorithm for data transmission, we conducted the data transmission from RVDB to HCDS, and compared to the transmitted data with the original data bit by bit. We confirmed that the transmitted data is identical to the original data without any loss and it has been recovered well even if there were some packet losses.

최근 PACS에서 장기간 저장장치로 디스크 배열이 많이 사용되고 있으나, 디스크에 대한 년 간 불량률에 관해서 신뢰성이 부족한 실정이다. 2016년 10월부터 2017년 2월까지 PACS 판독기에서 의료영상을 읽거나 저장하면서 하드디스크의 직렬포트단자를 조사하였으며, PACS 영상저장 장치에 사용되었던 하드디스크 98대와 개인용 컴퓨터에 사용되었던 하드디스크 101대에 저장된 데이터에서 전송률을 산출하였다. PACS 판독기에서 CT영상을 읽었을 경우에는 수십 MB이하 단위로 읽기는 87.8%, 쓰기는 12.2%가 수행되었다. PACS 판독기에서 CT 영상을 저장할 때는 수십 MB이하 단위로 읽기는 11.4%, 쓰기는 88.6%가 수행되었다. 개인용 컴퓨터에서 엑셀 파일을 읽을 경우에는 3 MB 이하단위로 읽기는 75%, 쓰기는 25%가 수행되었다. 개인용 컴퓨터에서 엑셀 파일 저장을 진행하면서 하드디스크와의 통신은 3 MB이하단위로 읽기는 38%, 쓰기는 62%가 수행되었다. PACS내 영상저장장치에 사용되는 하드디스크의 전송률은 10 GB/h, 개인용 컴퓨터의 하드디스크의 전송률은 5 GB/h로 나타났다. PACS내 영상저장에 사용되던 하드디스크의 년간 불량률은 0.97 ~ 1.13%를 보였고, 개인용 컴퓨터 내 하드디스크의 년간 불량률은 0.51~0.7%를 보였다. 전송량이 높을수록 년 간 불량률도 높아졌다. 이러한 결과는 하드디스크의 수명예측이나 연간 고장률을 예측하기 위한 기초 자료로 활용될 것이다.

In this study, an Wireless Data Transmission Module for Large Spatial Structures has been investigated. An Wireless Data Transmission Mobule was designed with a Zigbee-based wireless communication function and a low-power, a variety of external interface. This was designed using RadioPulse Inc's MG2470-chip with a Zigbee-based wireless communication function, and Power Circuit was designed using Battery. The MG2470-chip is a true 2.4GHz system-on-chip (SoC) designed for low-power, low-cost applications based on the industry standards such as IEEE802.15.4 and RF4CE. The MG2470 involves 8-bit 8051 MCU with internal 64-KB flash memory and 6-KB SRAM. Accordingly, it is possible to development of an optimal firmware.

In this paper, a logger of an earthquake accelerometer in order to link and share the seismic data easily with related institutes is presented. The firmware is embedded into the logger, which transforms the seismic data into the formats, miniSEED.

수중무선통신 시스템의 성능은 수중채널의 특성에 영향을 받으며, 특히 잔향 및 다중경로(Multi-path)로 인한 지연확산은 데이터 전송 시 인접심벌간의 간섭(Inter Symbol Interference : ISI)를 발생시켜 통신의 성능을 저하시킨다. 본 논문에서는 잔향 및 다중경로로 인한 인접 심벌간의 간섭에 강한 성능을 나타내는 OFDM(Orthogonal Frequency Division Multiplexing) 기법을 이용하여 수중에서 고속 데이터 전송의 적용성을 검토하였다. 실제 수중 채널을 모의하는 모델을 사용하여 수중에서 통신 성능을 확인하였다. 그 결과 1000m의 거리에서 단일 반송파의 경우 BER이 2×10-1 이였으며, 다중 반송파의 경우 BER이 8×10-2이었다.

The UPnP is middleware architecture that supports dynamic distributed computing environment. It has many good features for possible use as middleware in robot system integration. There is a need for bulky binary data transmission between distributed robot S/W components. Since the UPnP utilizes SOAP protocol for message transmission, however, it is not efficient to send bulky binary data. In order to overcome this weak point, this paper proposes UPnP-MTOM, MTOM (Message Transmission Optimization Mechanism) implementation over UPnP, as an efficient way for bulky binary data transmission with UPnP messages. This paper presents our implementation method and experimental results of the UPnP-MTOM implementation.

In this paper, we mainly analyze the performance of two ultra wideband communication systems, the classical Time Hopping Binary Pulse Position Modulation (TH-BPPM) UWB system and the Time Hopping Bipolar Pulse Amplitude Modulation (TH-BPAM) UWB system. The performance of TH-BPPM and TH-BPAM is analyzed in detail under an ideal AWGN channel and a correlation receiver. We use the power spectral density function to get the expression of BER of these two UWB systems. It yields simple and exact formulas relating the performance to the system parameters. The analysis shows that TH-BPPM suffers performance degradation with respect to TH-BPAM. Furthermore, we give the computer simulation of both data and image transmission and our simulation results also prove our theoretical analysis.

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system. The result of the paper presents that if data transmission area such as 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.