Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, design and manufacture of electronic beam filament total inspection equipment for mass production were dealted with.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, analysis and modification of prototypes of electron beam filaments for mass production were dealted with.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, design and manufacture of electronic beam filament automation facilities for mass production were dealted with.

Recently 3d printer industry has two demands. first is color 3d printing. second is mass production using 3d printer that has large bed. According to previous studies, 3D printed objects have different weights depending on filament colors. 3D printed tensile specimens with filaments of various colors were checked to see they had the same weight. If so, we wanted to see it was statistically significant. As a result, we found that the weight of 3D printed objects was statistically significantly different depending on the filament color. The average weight of 3d printed objects is: Black(8.63g), Blue(8.58g), Yellow(8.53g), White(8.48g), Natural(8.46g), Green (8.45g), Red(8.42g).

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, mainly design and manufacturing of facilities for making electron beam filament were dealted with.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, mainly jig & fixture design, production and trial production of electron beam filament were dealted with.

최근 토목공학 분야 내 현장조건을 구현할 수 있는 스마트 건설 기술의 요소기술로서 3D 프린팅 기술의 적용 분야 가 확대되고 있다. 센서기술의 보조도구, 모듈러 시공상 적용 등으로 다양하게 활용되고 있는 가운데 3D 프린팅 기술을 단순 부재 제작이 아닌 각각의 부재들이 최대 성능을 발휘할 수 있는 최적설계 도출 방안으로 활용하고자 한다. 이를 위해 3D 프린 팅 재질인 필라멘트를 활용하더라도 신뢰성 있는 최적설계가 도출이 가능한지에 대한 연구가 선행되어야 하며, 이에 본 연구에 서는 지반보강재 중 하나인 지오셀 관련 선행연구 결과와 필라멘트의 물성치가 적용된 해석 결과와의 비교를 통해 재료적 신뢰 성을 검증하고자 한다. 해석 결과, 지오셀 구성요소에 따른 보강성능의 경향이 기존 선행연구 결과와 일치함을 확인하였기에 필 라멘트를 활용하더라고 충분히 신뢰성 있는 최적설계가 도출이 가능할 것이라 판단된다.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance(electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, mainly electron beam filament specification analysis and development objectives and CAE analysis were dealted with.

Since electric energy is used in industry, mass production and various conveniences are provided. To provide convenience for the construction and operation of such electric energy transmission and distribution facilities, it is increasing that the demand for special purpose vehicles, that is, telescopic aerial work platform vehicles. When working active electric work using the telescopic aerial work platform vehicles, due to active electric work is inevitable, it is essential to ensure insulation performance for the safety of the operator. In this paper, we study the design and development of mechanical properties for filament winding process of glassfiber/epoxy composite, it is required to boom of telescopic aerial work platform vehicles. The glass fiber/epoxy composite filament winding process and its mechanical properties were evaluated to replace the existing ATOS80 boom. By filament winding process it was obtained the mechanical properties required for the design analysis of the glass fiber/epoxy composite boom. Using this, the insulated boom for the 30m class aerial work vehicle was designed and was manufactured by applying the filament winding process. The fabricated composite boom was evaluated by the static strength test to meet the required strength. The maximum displacement was 84mm and the crack occurred at the maximum load of 8981N. It satisfied the maximum lifting load of 4900N and 210mm the maximum displacement required for the boom.

Due to rapid industrialization and urbanization, maintenance of high voltage transmission lines in narrow alleys, complex roads, or old factory areas is required. Since the existing aerial lift vehicle is made of steel, there is a risk of electric shock. Therefore, there is a need for the development of an insulated aerial lift vehicle that can prevent electric shock accidents during electrical work. In particular, the development of an insulated aerial lift vehicle is required in a recent work environment where live line work is inevitable. The development of composite insulation boom for the vertical swing type aerial lift vehicle is studied. The insulated boom was developed by applying glass fiber-epoxy composite and filament winding process. The developed insulated boom was verified by measuring dielectric breakdown strength, surface resistance and volume resistance according to ASTM D149 and ASTM D257.

우리는 오리온 분자운 복합체의 북부 필라멘트(이하 NF)에 대하여 12CO (J=1-0) 분자선의 자료를 이용하여 은하 평면이 분자의 운동과 운동학에 미치는 영향을 연구하였다. 6 m 서울대학교 전파망원경(Seoul Radio Astronomy Observatory, SRAO)을 이용하여 2arcmin 공간분해능으로 은하면으로부터 먼 순서로 NF1, NF2, NF3 세 곳을 총 270시간 동안 관측된 자료를 사용하였다. 은하면과 OMC NF는 12CO (J=2-1) 경우 3% 밀도에서, 티끌의 경우 9% 밝기 수준에서 자기장을 따라 서로 연결되어 있었다. 12CO (J=1-0), 12CO (J=2-1), 성간 티끌 관측결과를 비교해본 결과, 세 경우 모두 NF3에서는 고루 분포했지만, NF1과 NF2에서는 비교적 밀도가 높은 특정 영역에서만 함께 나타났다. NF는 단일 구조를 보였으며, NF1에서는 부분 수축 운동을, NF2에서는 하단에서 회전 운동이 나타났고, NF3에서는 유일하게 명확히 자기장에 연관된 나선형 회전이 보였다. 위치-속도 분석 결과, 12CO (J=1-0)를 비롯한 물질들은 NF2와 NF3을 따라 은하면을 향하여 흐를 가능성이 있음을 확인할 수 있었다. 은하면을 향하여 물질이 흐르는 명백한 원인을 이번 연구결과에서 볼 수 없었지만 추후의 더 정교한 관측결과가 NF1과 NF2 상단부의 회전 운동을 확인 할 수 있겠다.

Scaffolds of cell substrates are biophysical platforms for cell attachment, proliferation, and differentiation. They ultimately play a leading-edge role in the regeneration of tissues. Recent studies have shown the potential of bioactive scaffolds (i.e., osteo-inductive) through 3D printing. In this study, rice bran-derived biocomposite was fabricated for fused deposition modeling (FDM)-based 3D printing as a potential bone-graft analogue. Rice bran by-product was blended with poly caprolactone (PCL), a synthetic commercial biodegradable polymer. An extruder with extrusion process molding was adopted to manufacture the newly blended “green material.” Processing conditions affected the performance of these blends. Bio-filament composite was characterized using field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDX). Mechanical characterization of bio-filament composite was carried out to determine stress-strain and compressive strength. Biological behaviors of bio-filament composites were also investigated by assessing cell cytotoxicity and water contact angle. EDX results of bio-filament composites indicated the presence of organic compounds. These bio-filament composites were found to have higher tensile strength than conventional PCL filament. They exhibited positive response in cytotoxicity. Biological analysis revealed better compatibility of r-PCL with rice bran. Such rice bran blended bio-filament composite was found to have higher elongation and strength compared to control PCL.

Numerous studies have been performed on the nutritional properties and health benefits of rice bran. However no previous reports have investigated rice bran-derived products as a biomaterial for bone formation. Thus, the aim of this study was fabricate composite filaments by combining the agricultural by-product rice bran and polycaprolactone (PCL), which has high biodegradability. It is suggest a possibility as a high value-added biomaterial capable of utilizing 3D printing. First, In order to investigate the optimal ratio of rice bran and PCL, the mixing ratios were set to 0%, 10%, 20%, 50% respectively, and the mixed filaments were defined as r-PCL filaments. The r-PCL filament was analyzed by FE-SEM and EDX for morphological characteristics and mechanical characteristics were analyzed by stress-strain, water contact angle, cytotoxicity test. Our findings confirm the possibility of manufacture environmentally friendly composite bio-filaments for FDM (Fused Deposition Modeling) based 3D printing technology. Thus, we could establish biomimetic scaffolds based on bio-printer filaments mixed with agricultural by-product.