PURPOSES : We propose a framework to evaluate the reliability of integrating homogeneous or heterogeneous mobility data to produce the various data required for greenhouse gas emission estimation. METHODS : The mobility data used in the framework were collected at a fixed time from a specific point and were based on raster data. In general, the traffic volume for all traffic measurement points over 24 h can be considered raster data. In the future, the proposed framework can be applied to specific road points or road sections, depending on the presence or absence of raster data. RESULTS : The activity data required to calculate greenhouse gas emissions were derived from the mobility data analysis. With recent developments in information, communication, and artificial intelligence technologies, mobility data collected from different sources with the same collection purpose can be integrated to increase the reliability and accuracy of previously unknown or inaccurate information. CONCLUSIONS : This study will help assess the reliability of mobility data fusion as it is collected on the road, and will ultimately lead to more accurate estimates of greenhouse gas emissions.

PURPOSES : This study is aimed to economic analysis of the ferronickel slag pavement method carried out to suggest the necessity of developing ferronickel slag pavement technology. METHODS : A life cycle cost analysis of the application of the Ferronickel Slag pavement method and the cutting + overlay pavement method was performed to compare the economic indicators and greenhouse gas emissions for each pavement method. RESULTS : As a result of the analysis, regardless of the Ferronickel Slag mixing rate, if the common performance of the Ferronickel Slag pavement method is the same or superior to the existing pavement method, it is more economical than the existing pavement method. Furthermore, the lower the maintenance cost of the Ferronickel Slag pavement method, the higher the economic feasibility due to the high Ferronickel Slag mixing rate. Greenhouse gas emissions can be reduced from at least 9% to up to 53% through the application of the Ferronickel Slag pavement method, except for some scenario analysis results. CONCLUSIONS : This study provided that the Ferronickel Slag pavement method was superior to the existing pavement method in terms of economic and environmental aspects. Therefore, it was found that the objective justification of developing road pavement technology using Ferronickel Slag was secured.

본 연구는 다년생 목본작물인 과수 바이오매스 부문의 온실가스 배출･흡수량을 우리나라 국가 온실가스 인벤토리 보고 시 고려되어야 할 적정 산정 방법을 모색하고자 수행되었다. IPCC 가이드라인에 따라 적정 산정 수준을 모색한 결과, 향후 우리나라에 알맞은 적정 산정 수준 (Tier)은 국가 고유의 활동자료와 국가 고유 배출흡수계수를 활용하는 수준 2 (Tier 2)로 나타났다. 국가 고유 배출흡수계수가 없어 수준 1 (Tier 1)을 적용해야 하는 현 시점에서는 매년 활동자료인 과수 재배면적 통계를 발표하기 때문에 손실획득법보다 축적차이법으로 산정하는 것이 적정하다. 수준 2에서 시범 산정한 결과, 이 부문의 상대적으로 낮은 중요도와 산정의 단순성 및 비용을 고려할 경우, 활동자료에 있어 단순화한 하위 범주를 사용하고 성숙목과 미성숙목을 구분하지 않는 것이 적정하다. 반면 온실가스 감축정책에 따른 반응성을 고려한다면, 성숙목과 미성숙목을 구분하는 접근 방법이 적정하다. 산정된 탄소축적량의 불확도는 활동자료보다는 국가 고유 배출계수의 불확도에 의해 크게 좌우되어 향후 신뢰도 높은 국가 고유 배출계수의 개발이 필요한 것으로 나타났다.

인간의 활동으로 인해 발생한 온실가스가 산업혁명 이후 자연흡수량보다 많 아지면서 대기 중 온실가스 농도는 지속적으로 높아지고 있다. 이로 인해 지구 온난화현상이 가속되어 인류를 위협하는 수준에 도달하였다. 이에 UN에서는 기후변화협약, 교토의정서, 파리협정을 채택하였고, IMO에서는 기술적 조치, 운 항적 조치를 이미 시행하였고, 시장기반조치를 비롯한 여러 조치들을 시행하고 자 노력하고 있다. 한편, 국제적인 온실가스 감축을 위한 조치에 따라 우리 정부는 온실가스 감 축목표를 설정하고 온실가스 감축을 위해 노력하고 있다. 그러나 해운산업분야 와 관련된 국내법령은 이를 따라가지 못하고 있는 것이 현실정이다. 따라서 본 연구는 선박온실가스 배출규제의 국내이행의 문제점을 식별하고 개선방안을 제시하는 것을 목적으로 한다.

This study was conducted to identify and assess key parameters affecting greenhouse gas emissions and odor intensity at a naturally ventilated dairy farm. Measurement data of greenhouse gases (CO2, CH4, N2O), odorants (NH3 and H2S), and meteorological data (wind speed, temperature, relative humidity, and solar radiation) were posited as the parameters influencing those emissions. Carbon dioxide and methane emissions correlated well to CO2-equivalent emissions and the contribution of carbon dioxide emissions (R2=0.9181) was greater than that of methane emissions (R2=0.8854). Hydrogen sulfide emissions were highly correlated with odor intensity (R2=0.9989), but the contribution of ammonia emissions to odor intensity was not significant (R2=0.0081). No correlation among CO2-equivalent and odor intensity emissions and meteorological parameters was observed. In this study, the relationship between emissions of greenhouse gases and odor intensity in a naturally ventilated dairy barn mainly depended upon carbon dioxide and hydrogen sulfide emissions. The results in this study will be helpful in the mitigation planning of greenhouse gases and odor in animal feeding operations (CFOs).

2015년 ‘파리협정’ 및 2021년 ‘기후위기 대응을 위한 탄소중립·녹색성장 기본법’ 제정에 따라 2030년 국가 온 실가스 감축목표(NDC, 2018년 대비 40% 감축) 달성을 위해서는 지자체별 적절한 온실가스 감축 목표 설정과 이행 노 력이 필수적이다. 이에 이 연구에서는 충청북도 지역을 중심으로 1990-2018년 까지 온실가스 배출 현황을 시계열로 분석하였고, 2030년 국가 온실가스 감축목표와 시나리오를 바탕으로 충청북도의 2030년 온실가스 감축 목표를 제안하였 다. 또한 감축 목표 달성을 위해 BAU 대비 장래 배출량을 고려한 2030년까지의 감축 잠재량을 추정하였다. 그 결과, 첫째, 우리나라와 충북의 온실가스 배출량은 1990년 이래 인구 및 경제 성장에 따라 증가해온 것으로 나타났으며, 2018년 국가 대비 충북의 온실가스 배출량은 3.9%로 매우 낮은 편이였고, 시멘트 및 석회 생산, 제조업 및 건설업, 수 송업 등 연료연소에 의한 배출이 주를 이루는 것으로 나타났다. 둘째, 2030년 NDC 및 2050 탄소중립 시나리오를 반 영한 2030년 충청북도 온실가스 감축 목표는 2018년 대비 40.2%로 설정하였다. 이에 장래 배출량을 고려할 경우 목표 달성을 위한 감축 잠재량은 2018년 대비 46.8%인 것으로 추정되었다. 상기 결과는 국가 및 지자체의 온실가스 감축 목표 달성을 위해서는 분야별 온실가스 감축 수단을 통한 감축 잠재량을 충족하는 것이 중요하다는 것을 의미한다. 또 한 2030년 NDC 및 2050 탄소중립 시나리오 달성을 위해 충북을 포함한 국가 및 각 지자체는 온실가스 장래 배출량 을 연도별로 추정하여 매년 감축 목표와 감축 잠재량을 구하고 이를 삭감할 수 있는 구체적인 감축 수단을 마련할 필 요가 있음을 말해준다.

The concern on the greenhouse gas emissions is increasing globally. Especially, the greenhouse gas emission from fisheries is an important issue from the Paris Climate Change Accord in 2015. Furthermore, the Korean government has a plan to reduce the GHG emissions as 4.8% compared to the BAU in fisheries until 2020. However, the investigation on the GHG emissions from Korean fisheries rarely carried out consistently. Therefore, the quantitative analysis of GHG emissions from Korean fishery industry is necessary as a first step to find a relevant way to reduce GHG emissions from fisheries. The purpose of this research is to investigate which degree of GHG emitted from the major offshore fisheries such as offshore gillnet fishery, offshore longline fishery, offshore jigging fishery and anchovy drag net fishery. Here, we calculated the GHG emissions from the fisheries using the Life Cycle Assessment method. The system boundary and input parameters for each process level are defined for the LCA analysis. The fuel use coefficients of the fisheries are also calculated according to the fuel type. The GHG emissions from sea activities by the fisheries will be dealt with. Furthermore, the GHG emissions for the unit weight of fishes are calculated with consideration to the different consuming areas as well. The results will be helpful to understand the circumstances of GHG emissions from Korean fisheries

The concern on the greenhouse gas emissions is increasing globally. Especially, the greenhouse gas emission from fisheries is an important issue due to Cancun Agreements Mexico in 1992 and the Kyoto protocol in 2005. Furthermore, the Korean government has a plan to reduce the GHG emissions as 5.2% compared to the BAU in fisheries until 2020. However, the investigation on the GHG emissions from Korean fisheries has not been executed much. Therefore, the quantitative analysis of GHG emissions from Korean fishery industry is needed as the first step to find a relevant way to reduce GHG emissions from fisheries. The purpose of this research is to investigate which degree of GHG emitted from the major coastal fisheries such as coastal gillnet fishery, coastal dual purpose fishery, coastal pots fishery and coastal small scale stow net fishery. Here, we calculated the GHG emission from the fisheries using the LCA (Life Cycle Assessment) method. The system boundary and input parameters for each process level are defined for LCA analysis. The fuel use coefficients of the fisheries are also calculated according to the fuel type. The GHG emissions from sea activities by the fisheries will be dealt with. Furthermore, the GHG emissions for the unit weight of fishes are also calculated with consideration to the different consuming areas. The results will be helpful to understand the circumstances of GHG emissions from Korean fisheries.

PURPOSES: This study devotes its energies to estimate greenhouse gas emissions for types of horizontal highway designs. METHODS: This paper suggested two types of road scenarios, scenario 1 is made by the lack of road design consistency. Beside scenario 1, scenario 2 is made by good road design. For comparisons of greenhouse gas emissions, driving simulator was used. RESULTS: Emission rates of road scenario 1 are 1.4 times higher than scenario 2 in the driving simulator. CONCLUSIONS : This study may have important implications for contributing to the application of road alignment technology for reduction of greenhouse gases as quantifying the correlations between greenhouse emissions and various road alignments. Consequently, this study will help road designers determine which roads are best alternatives in the process of choosing the roads in the future in terms of environmental benefits.

Biochar amendment to agricultural soil is regarded as a promising option to mitigateclimate change and enhance soil quality. It could sequester more carbon within the soil systemand increase plant yield by changing soil physicochemical characteristics. However, sustainableuse of biochar requires comprehensive environmental assessment. In this sense, it is important tomeasure additional greenhouse gas emission from soils after biochar addition. We investigatedemissions of CO2, N2O, and CH4from incubated soils collected from rice paddy and cultivatedgrassland after amendment of 3% biochar(wt.) produced from rice chaff. During incubation,soils were exposed to three wet-dry cycles ranging from 5~~85% soil gravimetric water content(WC) to investigate the changes in effect of biochar when influenced by different water levels. TheCO2emission was reduced in biochar treatment compared to the control at WC of 30~~70% bothin rice paddy and grassland soils. This indicates that biochar could function as a stabilizer for soilorganic carbon and it can be effective in carbon sequestration. The N2O emission was alsoreduced from the grassland soil treated with biochar when WC was greater than 30% because thebiochar treated soils had lower denitrification due to better aeration. In the rice paddy soil,biochar addition resulted in decrease in N2O emission when WC was greater than 70%, while anincrease was noted when WC was between 30~~70%. This increase might be related to the factthat available nutrients on biochar surface stimulated existing nitrifying bacterial community,resulting in higher N2O emission. Overall results imply that biochar amendment to agriculturalsoil can stabilize soil carbon from fast decomposition although attention should be paid toadditional N2O emission when biochar addition is combined with the application of nitrogenfertilizer.

지속적으로 강화되고 있는 국제 환경규제로, 해운사들은 선박의 온실가스 배출량을 줄이기 위한 노력을 해야 하는 상황에 직면해 있다. 본 연구에서는 총 온실가스 배출량에 대한 제약이 있는 상황에서 복수개의 항로를 운영하는 해운사에서 일 평균 선박 운영비용의 총합을 최소화하는 항로별 최적 선박대수와 운항속도를 결정하는 문제를 다룬다. 이 문제를 풀기위해 라그랑지안 휴리스틱 알고리즘을 개발하고 라그랑지안 쌍대문제를 풀어 최적해에 대한 하한값을 구한다. 제시한

Chuncheon according to the IPCC guideline, and they increased from 1,014,382 ton-CO2 in 2000 to 1,084,914 ton-CO2 in 2009. Using BAU scenario GHG emissions in 2020 was estimated to be 1,518,526 ton-CO2, which increase approximately 40% from those for 2009. Six reduction methods were applied in this study, including solar power generation, substitution of LED lights, individual and families' energy reduction efforts, cogeneration of incinerator, and expansion of natural gas line. Estimated total reduced GHG emission was 174,340 ton-CO2.

한국지질자원연구원은 기관차원의 연구활동에 따른 온실가스 감축 기여를 활성화하고자, 온실가스 배 출량 산정 가이드라인을 개발하고 이를 적용하고자 하였다. 이에 시범적으로 2022년도에 현재 수행중인 기본사 업 34건의 R&D 활동 그 자체에 의한 온실가스 배출량 규모를 파악하였다. 개별과제의 연구계획 내용과 예 산내역을 분석하여 여러 온실가스 배출범위와 경계를 정하였으며, 직접배출원, 간접배출원, 기타 직·간접 배출원 등 22건을 도출하여 해당 연구활동에 의한 배출량을 시범 산정하였다. 그 결과, 한국지질자원연구원 2022년 도 기본사업 R&D 활동에 의한 온실가스 배출량은 전체 2,041.506 tCO2eq으로 산정되었고, 그 중 직접 배출 량은 793.235 tCO2eq (38.86%), 간접 배출량은 305.647 tCO2eq (14.97%), 기타 직·간접 배출량은 942.624 tCO2eq (46.18%) 이었다. 2022년도 한국지질자원연구원의 기본사업 투입예산(총액 966.61억원)에서 1억원당 온실가스 배출량은 2.11 tCO2eq으로 산정되었고, 참여연구원 1인당(참여율 100% 감안) 온실가스 배출량은 4.800 tCO2eq으로 추정되었다. 이러한 연구과제의 온실가스 배출량 산정연구는 1회성 보다는 지속적으로 매 년 정기적으로 수행하고, 최소 5년 이상 정도의 축적이 이뤄져야만 연구분야 특성과 연구방법의 상이에 따른 배출량 증감 및 특이사항의 정형화가 가능할 것이며, 향후 배출량 관리방향 설정과 ESG경영의 환경부문 기 여도 평가에도 활용이 가능할 것으로 사료된다.

Renewable energy resources from foodwaste have attracted significant interest and, consequently, many alternatives are considered for large-scale biogas treatment processes and small-scale onsite drying processes (heat source: electricity, gas, and dried foodwaste by-product). The pre-treatment process for foodwaste consists of the following sequential steps: collection, transportation, shredding, segregation, and dehydration. After this pre-treatment, the dried foodwaste by-product is recycled into (among others) animal feed, fertilizer/compost or biomass solid fuel. In addition, the leachate?liquid generated by squeezing the foodwaste is used for bio-gasification, achieved through an Anaerobic Digestion (AD) process associated with a sewage co-digestion treatment. In this study, the operation cost and greenhouse gas (GHG) emissions of an improved and simplified small-scale onsite drying treatment are compared with those of a large-scale biogas treatment. The pre-treatment can be improved and simplified via this drying treatment. Through this treatment, operationcost reductions of 45.4%, 50.5%, and 89.6% are achieved when electricity, liquified natural gas (LNG), and biomass solid fuel (dried foodwaste by-product), respectively, are employed as drying heat sources. Furthermore, if the annual amount of foodwaste (5 million ton) is recycled into biomass solid fuel, then significant reductions (7.5 million tCO2-e per annum) in GHG emissions can be realized. Therefore, this study demonstrates that improvement and simplification of the smallscale drying process (i) reduces the operation cost as well as GHG emission levels (to levels lower than those achieved via the large-scale biogas treatment process) and (ii) offers a practical solution for foodwaste treatment and a renewable energy resource.

The objective of this research was to estimate the greenhouse gas (GHG) emission factors for food, paper, and wood wastes through methane (CH4) flow analysis. The GHG emissions from a given amount of landfill waste depend on the carbon (C) flows in the waste: (1) carbon storage in landfills, (2) C in carbon dioxide (CO2) and CH4 generated in anaerobic waste decomposition, (3) C in CO2 and CH4 emitted to the atmosphere through vertical gas wells, (4) C in CO2 from CH4 oxidation through cover soils, and (5) C in CH4 emitted to the atmosphere through cover soils. This study reviews the literature on the ranges for DOCf (the fraction of degradable organic carbon that can decompose) and OX (oxidation factor) values of food, paper, and wood, with a particular focus on the role of lignin. There is an inverse relationship between lignin and the DOCf of paper and wood wastes. In this respect, the lignin content could be used as an abatement indicator for the DOCf of paper and wood. The literature review shows that the average DOCf values for food, paper, and wood were 0.72, 0.61, and 0.12, respectively. The country-specific DOCf value for wood (0.44) is significantly higher than the ranges reported in the literature, which implies that the country-specific DOCf for wood can overestimate GHG emissions compared to the DOCf obtained from the literature. The estimated GHG emissions factors were 1,055 kg-CO2e/ ton-wet waste for food, 1,367 kg-CO2e/ton-wet waste for paper, and 276 kg-CO2e/ton-wet waste for wood. Sensitivity analysis results showed that the most influential parameters were MCF (CH4 correction factor), DOCf, and OX. In order to reduce GHG emissions from landfill in Korea, landfill sites currently in operation should be converted from anaerobic to semi-aerobic.