A heat exchanger refers to a pressure vessel that indirectly exchanges heat between low-temperature/ high-temperature fluids with a solid wall interposed therebetween, and a shell-and-tube cylindrical heat exchanger is generally applied. The shell-and-tube cylindrical heat exchanger is widely used in ships and there is a problem in that the welding area is narrow and welding defects occur a lot due to high-level welding. In particular, in the case of a ship heat exchanger, if a problem occurs in the welding part during operation, the possibility of a safety accident is high, and repair is not easy. In this study, to solve this problem, the GTAW(Gas Tungsten Arc Welding) method was applied to secure the optimum conditions for pipe welding of STS304 material with a thickness of 5.5mm and to conduct a test. Afterwards, in accordance with the ASME rules, welding performance was verified through cross-sectional observation of welds, mechanical property tests, (tensile strength, bending strength, cryogenic impact strength) and non-destructive testing(PT, RT).

9% nickel steel has remarkable mechanical properties in a cryogenic condition and is widely used in storage containers for LNG fueled ships. Demand for laser welding rather than conventional arc welding has grown to increase manufacturing efficiency. However there are various types of heat sources which are suggested by other researchers. With that, it is difficult to select a proper heat source shape for welding conditions. The author proposed a representative heat source model that can cover most of suggested heat source models through previous studies. Welding power was fixed at 4kW and the speed was changed to 1.0m/min, 1.5m/min, and 2.0m/min respectively. The shapes of the welding heat sources were derived, and the tendency of the main parameters was also deducted. It was observed that the width and depth of the weld bead decreased as the welding speed increased through welding experiment, parameters of welding heat source are changed linearly. Based on this study, it is expected that it will be possible to estimate the shape of the heat source under untested welding conditions.

A Cu-15Ag-5P filler metal (BCuP-5) is fabricated on a Ag substrate using a high-velocity oxygen fuel (HVOF) thermal spray process, followed by post-heat treatment (300oC for 1 h and 400oC for 1 h) of the HVOF coating layers to control its microstructure and mechanical properties. Additionally, the microstructure and mechanical properties are evaluated according to the post-heat treatment conditions. The porosity of the heat-treated coating layers are significantly reduced to less than half those of the as-sprayed coating layer, and the pore shape changes to a spherical shape. The constituent phases of the coating layers are Cu, Ag, and Cu-Ag-Cu3P eutectic, which is identical to the initial powder feedstock. A more uniform microstructure is obtained as the heat-treatment temperature increases. The hardness of the coating layer is 154.6 Hv (as-sprayed), 161.2 Hv (300oC for 1 h), and 167.0 Hv (400oC for 1 h), which increases with increasing heat-treatment temperature, and is 2.35 times higher than that of the conventional cast alloy. As a result of the pull-out test, loss or separation of the coating layer rarely occurs in the heat-treated coating layer.

In this study, the dietary fiber content of 33 kinds of agricultural products and seaweeds was compared with that of raw products after heat treatment. To verify the total dietary fiber analysis method, the recovery rate was reviewed by measuring the total dietary fiber content for 4 standard certified substances. As a result, the recovery rate of the analysis value for the true value was 98.8%~103.1%, which was judged to be reliable. The total dietary fiber of vegetables ranged between 0.61~5.36 g/100 g for raw vegetables and 0.55~4.84 g/100 g for heat-treated vegetables. Among the 24 kinds of vegetables used in the analanalysis, the total dietary fiber content of heat-treated Korean radish (3.13 g/100 g) was the highest compared to that of raw radish (0.61 g/100 g). The total dietary fiber of beans was between 13.86~29.69 g/100 g for raw beans and 6.72~18.40 g/100 g for heat-treated beans. In particular, the total dietary fiber content of sword beans was the highest in both raw (29.69 g/100 g) and boiled (18.40 g/100 g) beans. The total dietary fiber content of the three types of seaweed was 1.93~4.85 g/100 g in raw seaweed and 0.99~5.72 g/100 g in heat-treated seaweed.

본 연구에서는 건열처리를 통해 알팔파 종자에 접종된 Bacillus cereus ATCC 12480, Listeria monocytogenes ATCC SSA81, Staphylococcus aureus ATCC 6538, Escherichia coli O157:H7 ATCC 43894, Salmonella Typhimurium ATCC 14028을 발아율에 영향 없이 불활성화 시키는 조건(65oC 에서 21일, 70oC에서 16일, 75oC에서 10일, 80oC에서 7일)을 조사하였다. 알팔파 종자를 6-7 log CFU/g 수준으로 접종 하고 65, 70, 75, 80oC로 건열처리 한 후, 발아율을 확인 하였다. 알팔파 종자의 발아율은 시장에 유통되고 있는 알 팔파 새싹의 발아율 기준인 70%로 설정하였다. 알팔파 종 자에서 B. cereus는 65oC에서 21일, 70oC에서 18일, 75oC 에서 14일, 80oC에서 4일, Listeria monocytogenes는 65oC에서 21일, 70oC에서 18일, 75oC에서 12일, 80oC에서 7일, S. aureus는 65oC에서 18일, 70oC에서 18일, 75oC에서 11 일, 80oC에서 4일, E. coli O157:H7은 65oC에서 21일, 70oC 에서 18일, 75oC에서 12일, 80oC에서 6일, Sal. Typhimurium 은 65oC에서 24일, 70oC에서 22일, 75oC에서 14일, 80oC 에서 7일 이상 건열처리 하였을 때 완전히 불활성화 되었 다. 모든 균주는 65oC에서 80oC로 온도가 상승할 때 특정 온도에서 세균의 90%를 죽이는 데 필요한 시간인 D-값 (R2=0.5656−0.7957)이 유의미하게 감소하였다(P<0.05). 80oC 에서 7일간 건열처리 하였을 때 발아율이 70% 미만으로 감소하였기 때문에 75oC에서 14일간 건열처리 하는 것이 알팔파 종자의 안전성을 확보하는데 있어 가장 효과적인 방법이다. 이 연구는 알팔파 종자의 안전성을 확보하고 일 정한 품질의 새싹을 생산하는데 기초자료로 이용될 것으 로 기대된다.

As the demand for appropriate heat dissipation measures to improve product stability and performance continues to increase and product design becomes highly integrated, research to improve heat transfer performance while maintaining the same area or size is required. In this study, the sample-shaped aluminum plate was treated as upper-coating, and the thickness of the coating was divided into 1mm, 2mm, and 3mm, respectively, and the coating material was applied with silver, copper, and graphene. The temperature condition of the heat source was set to 473K, and heat dissipation analysis was performed under natural convection. The thermal performance was compared and analyzed through temperature distribution, flow velocity distribution, and heat flux, and it was confirmed that the high thermal conductivity of graphene compared to other materials had a dominant effect on the increase in the conduction heat transfer rate. And it was confirmed that the high surface temperature of the graphene coating also increased the heat transfer rate by convection, thereby enhancing the heat dissipation effect.

Laser welding is used in various industries due to fast welding speed, and prediction with FEM is needed to design. The multi-layered heat source model that can cover various models has been recently proposed to analyze laser welding, but it takes a lot of time because more than 2,000 cases are compared to derive the results. In order to reduce the time, the simplified model should be suggested. In order to derive a simplified model, laser welding heat transfer analysis was performed using the welding direction length and the convection coefficient of the welding direction surface as parameters. As a result, the model whose difference is less than 0.1% compared to reference model is deducted. The analysis time was reduced by about 90% from 48 hours to 5 hours. Also difference of convection coefficient on the welding direction surface does not affect the temperature distribution much.

The new & renewable energy including solar heat has been widely used to reduce the fossil fuel. Air-heating collector of solar heat is usually known as technology that supplies the hot air to indoor room. However, this study aims to investigate the possibility of cold room by air-heating collector of solar heat. The thermal flow in cold room was simulated using ANSYS-CFX program and thus the behaviors of cold air were evaluated with standard k-ε turbulence model. As the results, there was space in indoor room not showing cooling effect in case that both inlet and outlet were installing at bottom. Inlet temperature showed greater cooling effect than inlet velocity. Furthermore it was confirmed that the location and the temperature, respectively, capable of cooling indoor room could be predicted by changing the attached position of inlet and outlet.

As laser welding has low thermal distortion and fast welding speed, the needs in the field is increasing in varous industries. Prediction of distortion and design with that prediction are very important for using welding process in the field. However many types of heat source models for laser welding are suggested, field engineers feels difffucult for using a proper model for a specific case. Thus I, author, suggested a representative model which can cover most of existing models with multi-layered heat source model. This method is very powerful, but there are much time consumption with analysis and comparision among more than 1,000 candidates. To solve these shortcomings, this study focused on to find the simplified model. In order to construct the simplified model, the length of the orthogonal direction to the welding direction was reduced from 300mm to 35mm, which makes time reduction of 75% with sustaining the quality of the original model. That can cover the disadvantage of multi-layered heat source model for laser welding, enhance the prediction of welding distortion after laser welding

Novel Ni- and Fe-based alloys are developed to impart improved mechanical properties and corrosion resistance. The designed alloys are manufactured as a powder and deposited on a steel substrate using a high-velocity oxygen-fuel process. The coating layer demonstrates good corrosion resistance, and the thus-formed passive film is beneficial because of the Cr contained in the alloy system. Furthermore, during low-temperature heat treatment, factors that deteriorate the properties and which may arise during high-temperature heat treatment, are avoided. For the heattreated coating layers, the hardness increases by up to 32% and the corrosion resistance improves. The influence of the heat treatment is investigated through various methods and is considered to enhance the mechanical properties and corrosion resistance of the coating layer.

This study aimed to optimize the fermentation condition of black bean using probiotic lactic acid bacteria (LAB) and to evaluate characteristics and antioxidant activity of LAB fermented and heat-treated black bean. Two LAB strains were selected by analysis of acid resistance, bile resistance, antimicrobial activity, and antioxidant activity, and identified as Lactiplantibacillus plantarum CH9 and Lactiplantibacillus plantarum SU18 by 16S rRNA sequencing. Both strains showed similar or higher acid resistance, bile resistance and antimicrobial activity, compared to Lacticaseibacillus rhamnosus GG, a commercial probiotic strain. The heat-killed cells of CH9 and SU18 strains showed significantly (p<0.05) higher DPPH and ABTS radical scavenging activities than live cells. Fermentation of black bean (30%) treated with Alcalase using the two selected strains was found to be optimal condition, increasing viable cell count of LAB up to 10.8 Log CFU/g. During the fermentation, the titratable acidity of Alcalase-treated black bean was notably increased with concomitant decrease in the pH. LAB fermentation significantly (p<0.05) increased antioxidant activity based on DPPH and ABTS radical scavenging activities as well as total phenol content. In addition, total phenol content and antioxidant activity were significantly (p<0.05) enhanced by heat processing (121C, 15 min) of the fermented products. These findings are expected to be useful for the development of various LAB-fermented foods containing heat-killed probiotics.

돌기해삼 Apostichopus japonicus는 주요 양식 대상 무척추동물로서 우리나라 연안 해역에 서 식하고 있다. 본 연구는 방류 방법에 따른 단기간의 생리학적 스트레스 정도를 평가하기 위하 여 heat shock protein 90 (HSP90) 유전자의 발현 변화를 실시간 정량적 중합효소연쇄반응법 으로 조사하였다. 어린 돌기해삼을 비닐봉지에 산소 포장하여 30분간 수송하거나 방류 해역의 간조기에 1시간 공기 중에 노출된 실험군의 HSP90 유전자 발현은 대조군의 HSP90 유전자 발현에 비하여 통계학적으로 유의미하게 증가하였다(수송 후 실험군 p=0.001; 간조기 실험군 p=0.032). 어린 돌기해삼을 방류 후 6시간까지 분석한 결과, 선상에서 씨뿌림 방식으로 방류된 6시간째의 개체 및 호스를 통과하여 수중으로 방류된 2~6시간째의 HSP90 유전자 발현율은 대 조군에 비하여 약간 감소하는 경향을 보였다(씨뿌림 실험군 p=0.069; 호스 방류군 p=0.093). 한 편, 잠수부에 의해 수중에서 방류된 어린 돌기해삼은 방류 후 시간이 경과할수록 HSP90 유전 자 발현율은 증가하는 패턴이 관찰되었다(p=0.061). 이상의 결과는 방류된 어린 돌기해삼의 단기간 스트레스 반응 연구와 효과적인 방류 방법의 개발에 HSP90 유전자 발현이 유용하게 사용될 수 있음을 시사한다.

Ti3C2Tx MXene, which is a representative of the two-dimensional MXene family, is attracting considerable attention due to its remarkable physicochemical and mechanical properties. Despite its strengths, however, it is known to be vulnerable to oxidation. Many researchers have investigated the oxidation behaviors of the material, but most researches were conducted at high temperatures above 500 oC in an oxidation-retarding environment. In this research, we studied changes in the structural and electrical properties of Ti3C2Tx MXene induced by low-temperature heat treatments in ambient conditions. It was found that a number of TiO2 particles were formed on the MXene surface when it was mildly heated to 200 oC. Heating the material to higher temperatures, up to 400 oC, the phase transformation of Ti3C2Tx MXene to TiO2 was accelerated, resulting in a TiO2/ Ti3C2Tx hybrid. Consequently, the metallic nature of pure Ti3C2Tx MXene was transformed to semiconductive behavior upon heat-treating at ≥ 200 oC. The results of this research clearly demonstrate that Ti3C2Tx MXene may be easily oxidized even at low temperatures once it is exposed to air.

The research for the safe management of high-level waste in Korea has been conducted by the Korea Atomic Energy Research Institute since 1997, and the results have formed the basis of the national basic plan for the high-level waste management and the revised national basic plan. In the future, it is evolving and developing R&D focusing on securing technologies for demonstration of the disposal technologies and R&D to develop disposal concepts that increase safety and improve efficiency. Efficient management of heat generated from high-level radioactive waste, including spent nuclear fuel, is an important factor in establishing the disposal concepts because it must be in harmony with key factors such as repository layout, waste disposal container specifications, and design and operation for the barriers of the disposal system. For safe and complete isolation of highlevel radioactive waste in the deep geology, the disposal systems that meet the thermal requirements for the disposal system design have been developed by harmonizing the thermal characteristics of engineered and natural barriers in Korea. These disposal systems were based on low burn-up spent nuclear fuel characteristics generated in the early stages of nuclear power generation, and next, based on the high-level wastes from recycling process of the high burn-up spent nuclear fuels, and were the direct disposal systems for the high burn-up spent nuclear fuels. So, it is necessary to track and analyze the change process in the decay heat characteristics of the high-level waste to be disposed of in order to improve the disposal concept, which enhances the safety of disposal and the utilization of the national land. Therefore, in this paper, the process of change in decay heat of reference spent nuclear fuels for disposal applied to the disposal concepts from the initial stage of development of high-level waste disposal technology to the present in Korea is analyzed.

The design of the high-level radioactive waste (HLW) repository is made for isolating the HLW from the groundwater system by using artificial and natural barriers. Granite is usually considered to be a great natural barrier for the HLW repository in various countries including Sweden, Canada, and Korea due to its low hydraulic permeability. However, many fractures that can act as conduits for groundwater and radionuclides exist in granite. Furthermore, the decay heat generated by the HLW can induce groundwater acceleration through the fracture. Since the direction, magnitude, and lasting time of the heat-induced groundwater flow can be differed depending on the fracture geometry, the effect of fracture geometry on the groundwater flow around the repository should be carefully analyzed. In this study, groundwater models were conducted with various fracture geometries to quantify the effect of various properties of fractures (or fracture networks) on the heat-induced groundwater flow. In all models, the pressure around the repository only lasted for a short period after it peaked at 0.1 years. In contrast, the temperature lasted for 10,000 years after the disposal inducing the convective groundwater flow. Single fracture models with different orientations were conducted to evaluate the variations in groundwater velocities around the repository depending on the fracture slope. According to the results, the groundwater velocity on the fracture was the fastest when the regional groundwater flow direction and the fracture direction coincided. In double fracture models, various inclined fractures were added to the horizontal fracture. Due to the intersecting, the groundwater flow velocity showed a discontinuous change at the intersecting point. Lastly, the discrete fracture network models were conducted with different fracture densities, length distributions, and orientations. According to the modeling results, the groundwater flow was significantly accelerated when the fracture network density increased, or the average fracture length increased. However, the effect of the fracture orientation was not significant compared to the other two network properties.

Dry storage is a predominantly used method as a spent nuclear fuel storage system after spent nuclear fuel is cooled in the spent fuel pool. Spent nuclear fuel is highly radioactive and it generates heat called decay heat originated by fission products and radiation. Therefore, temperature of spent nuclear fuel should be predicted whether its cladding temperature is maintained under 400°C, which is the allowable temperature limit of cladding in a dry storage. ANSYS Fluent and COBRA-SFS are predominantly used computational method to investigate the temperature of spent nuclear fuels in a dry storage. Herein, thermal analysis results with the methods were compared based on a Single Assembly Heat Transfer Test, which is a heat test with an electrically heated model of a single PWR fuel assembly in a dry cask performed at the Pacific Northwest Laboratory. Decay heat was 1kW and backfill gas was air. Fix temperature boundary condition is applied to inner shell according to measured temperature. In case of peak cladding temperature (PCT), Fluent predicted 240–284°C, while COBRA-SFS gave 243–292°C. The discrepancy between the codes is under 2.5%. The location where PCT took place was 3.65 m from the bottom of the assembly in both results. However, temperature difference between the upper and lower region of the assembly based on the Fluent was smaller than the temperature difference based on the COBRA-SFS. It means the heat was well transferred in an axial direction with Fluent compared to COBRA-SFS. In lower plenum region where air was naturally circulated, COBRASFS had disadvantages compared to Fluent because it modeled the lower plenum by single node, so it was hard to simulate convection heat transfer by natural circulation. natural circulation speed of air in a center region of the assembly was 0.07–0.1 m·s−1 in both cases.

The fabrication of waste forms with high thermal and structural stability is an essential technology for the safe management and disposal of radioactive wastes. In particular, the thermal characteristics of waste forms containing high heat-generating nuclides such as Cs and Sr can be used for the optimized design of the waste form to secure its thermal safety, and they also provide basic design data for the safe management of canisters, storage systems, and repositories. The Korea Atomic Energy Research Institute is actively developing processes and equipment for fabricating various types of high-level wastes into a stable glass or ceramic waste form. In previous research related to the thermal analysis of the waste form, a relatively simple analysis was performed by using the analytic solution of the one-dimensional steady-state heat conduction equation considering the decay heat properties of the waste. As a specific application study, the optimized diameter of the cylindrical glass waste form was proposed by evaluating the centerline temperature of the waste form. In this study, we extended previous research by introducing a more complicated model, and the main results are summarized as follows. First, an analytical solution was derived by applying the temperaturedependent thermal conductivity expressed in the general form of polynomial function to the onedimensional heat conduction problem previously studied. Second, the two-dimensional axisymmetric steady-state heat conduction problem with a more realistic cylinder model with finite length was modeled and solved by using the finite element method via Matlab’s PDE (partial differential equation) toolbox. Third, thermal analysis was performed on the SrTiO3 waste form, selected as a stable form of strontium nuclide, using the developed analytical and numerical methods. The differences in the temperature distribution and computation time were evaluated through a comparative study of both solutions. Although the problem considered in this study could easily be solved by using commercial CFD software such as ANSYS or SolidWorks, a code-based program was developed to facilitate parametric design study in conjunction with optimization algorithms. The analysis results could be used to evaluate the thermal stability of waste form and to optimize the shape and size of the waste form in consideration of the design constraints of storage systems or repositories.

본 연구에서는 2019년에서 2021년까지, 매년 2월에서 5월 동안 대전광역시 6개 지점(기준지역 1곳 포함)의 기 온 데이터를 바탕으로 COVID-19로 인한 인간 활동의 감소가 대전 지역의 도시열섬강도에 미친 영향에 대하여 분석하 였다. 관측 지점에 따라 차이는 있으나 도시열섬강도는 COVID-19 전인 2019년에 비해 2020년과 2021년에 약 20% 이상 감소되었다. 인간 활동 감소는 야간의 도시열섬을 증가시키고 주간의 도시열섬을 감소시켰다. 그 결과 도시열섬강 도의 일변동 폭은 지점에 관계없이 2019년에 비해 2020년 및 2021년 모두 약 20% 이상 증가하였다. 도시열섬강도 감 소는 풍속과 같은 자연적 요인 및 사회적 거리두기 단계와는 큰 관련성이 없는 것으로 보인다. 반면에 COVID-19 이후 시행된 사회적 거리두기 및 확연히 감소된 대기오염물질과 관계가 있는 것으로 나타났으며, 특히 NO2와 가장 유의미한 상관관계를 보였다.