원자력발전의 최대 걸림돌은 사용 후 핵연료인 고준위폐기물이다. 높은 방사능과 발생하는 열은 사용 후 핵연료의 안전한 처분을 어렵게 하고 있다. 현재 유일한 처리방법은 심지층 처분기술이다. 본 논문은 이와 같은 심지층 처분기술의 핵심기술 중의 하나인 처분용기의 구조안전성 설계문제를 다루고 있다. 특히 처분장에서 처분용기 처분 시 사고로 운송차량에서 추락 낙하 하여 지면과 충돌하는 경우 처분용기에 가해지는 충격력에 의하여 처분용기에 발생하는 응력 및 변형에 대한 비선형구 조해석을 수행하였다. 해석의 주된 내용은 심지층 처분장에서 운반차량으로 처분용기 운반 중 사고로 추락낙하 하여 지면과의 충돌 시에 처분용기에 가해지는 충격력을 기구동역학해석 상용 컴퓨터코드인 RecurDyn으로 구하고 이 충격력에 의하여 처 분용기에 발생하는 응력 및 변형을 유한요소 정적 구조해석 상용 컴퓨터코드인 NISA를 이용하여 구한 것이다. 해석결과는 충돌 충격 시간 중 발생하여 처분용기에 가해지는 충격력에 의하여 처분용기, 특히 처분용기의 위 덮개 혹은 아래 덮개에 큰 응력과 대변형이 발생함을 보여주고 있다.

A bond-based peridynamic model has been reported dynamic fracture characteristic of brittle materials through a simple constitutive model. In the model, each bond is assumed to be a simple spring operating independently. As a result, this simple bond interaction modeling restricts the material behavior having a fixed Poisson’s ratio of 1/4 and not being capable of expressing shear deformation. We consider a state-based peridynamics as a generalized peridynamic model. Constitutive models in the state-based peridynamics are corresponding to those in continuum theory. In state-based peridynamics, thus, the response of a material particle depends collectively on deformation of all bonds connected to other particles. So, a state-based peridynamic theory can represent the volume and shear changes of the material. In this paper, the perfect plasticity is considered to express plastic deformation of material by the state-based peridynamic constitutive model with perfect plastic flow rule. The elastic-plastic behavior of the material is verified through the stress-strain curves of the flat plate example. Furthermore, we simulate the high-speed impact on 3D granite model with a nonlocal contact modeling. It is observed that the damage patterns obtained by peridynamics are similar to experimental observations.

본 논문에서는 다중적층 유리의 고속 충돌체에 의한 충돌/침투 파괴 현상을 해석하기 위해 페리다이나믹 동적 해석 기법을 적용한다. 대부분의 다중적층 유리 구조물들은 다수의 주요 유리층들이 상대적으로 매우 얇은 탄성 필름으로 접착되어서 만들어진다. 따라서 다중적층 구조물의 수치해석 모델을 구성하는 것은 까다롭고 비용이 많이 든다. 본 연구에서는 실제 절점을 대신하여 가상의 절점들을 주요층들 사이에 위치시키고 상호작용시키는 비국부 가상 층간구조 모델링을 도입하여 보다 효율적으로 다중적층 구조를 모델링하였다. 또한 고속 충돌체와의 충돌 및 침투 현상을 해석하기 위해 페리다이나믹 비국부 접촉 모델이 고려되었다. 7개의 유리층과 하나의 탄성 백킹층이 폴리비닐부티랄 필름으로 부착된 다중적층 유리의 충돌 파괴 해석을 통해 제안된 해석 모델의 손상 파괴 적용 가능성을 확인하였다

본 연구에서는 LNG 공급계통시스템의 재기화 공정에서 배관 손상으로 인한 누출사고 발생시 LNG 성분 및 누출공의 크기에 따른 연소특성에 대한 피해범위를 산출하고, 피해영향을 해석하였다. LNG 성분에 따른 연소특성을 확인하기 위하여 7곳의 LNG 산지별 위험도를 확인한 결과 산지별 큰 차이를 보이지 않았으나, LNG 구성성분 중 메탄의 함유량이 많을수록 플래시화재 발생범위 및 증기운 폭발에 의한 과압이 발생하는 위험범위 그리고 제트화재 발생에 의한 열 복사량 피해영향이 다른 산지에 비해 비교적 낮음을 알 수 있었다. 또한 배관 누출공의 크기에 따라 누설, 파공, 파괴 3단계에 나누어 위험 범위 및 폭발에 미치는 영향에 대한 연구를 수행하였으며, 플래시화재로 인한 피해영향범위를 계산하고, 이에 따라 LNG 누출시 화재가능 위험범위를 확인했으며, 과압의 영향 및 복사열로 부터의 피해범위를 예측할 수 있었다. 이를 통해 LNG 조성 및 배관 누출공의 크기가 화재 및 폭발에 미치는 영향을 예측할 수 있었다.

Prior to the design and production stages of the center pillar, the structural analysis must be carried out at the concept stage. Commercial softwares for the structural analysis provide benefits such as performance prediction and deformation. In this study, the structural analysis using SolidWorks was performed to investigate the stress and displacement characteristics of the center pillar for two types of collision positions and velocities. As the impact velocity increased, the maximum equivalent stress and displacement of the center pillar were larger. In the case of passenger cars, the equivalent stress and displacement according to the velocity change increased by about 133% and 116% at 16.5m/s , based on 5.5m/s . Also, the equivalent stress and displacement in the SUV car increased by about 119% and 378%, respectively

This study analyzed the impact of FTA tariff elimination on the export prices for Norwegian fresh and chilled salmon, of which Korean import has significantly increased since the Korea-EFTA FTA implementation. Korea's fresh and chilled salmon market is almost monopolized by Norway, and Korea's price level is higher than other countries, so it is highly likely that price discrimination occurs. This study theoretically explained that exporters could adjust their prices by market power when tariffs are eliminated in imperfectly competitive markets. And the empirical analysis provided evidence that the exporters have made price adjustments since the FTA took effect, and similar results were found in the relative price comparison with trade statistics and Nasdaq Salmon Index. Therefore, in order to increase consumer welfare in Korean salmon market, it is required to transform the monopolistic market structure into a competitive one.

Entering the New-normal era, China has defined the start-up as a driving force for sustainable economic development. China's start-up support policy, represented by "makers", is now China's biggest issue. China has established a society based on makers and presented a new development model that enables socially diverse economic communities to continuously develop the Chinese economy. This paper intends to enhance the structural and in-depth understanding of “makers-based society” by analyzing the socially influential actors/keywords of China's makers policy. For this purpose, Big data related to makers were collected for data analysis and data mining and semantic network analysis were conducted. The results of the analysis are as follows: First, China's makers policies are steadily expanding and developing due to active government support and the enthusiasm of social entrepreneurship; Second, from the social point of view, the value of the start-up, the market orientation, and the regional support policy are important; Third, China has been actively developing and utilizing entrepreneurship-related curriculum, and it has been cultivating human resources suitable for start-up; Fourth, makers are an important platform for globalization of human resources in China as a driving force for sustainable development. It is also revealed that young people are building their own entrepreneurial ecosystem through their start-up and realizing their dreams.

Impact damage tolerance is an important design requirement for composite structures. In this study, the effect of post impact damage and hole size of the composite sandwich skin / sandwich with core specimen on compressive strength of the laminate was analyzed. Three specimen tests were performed in this research. Two tests were carried out on pure bending test specimens subjected to impact damage to the skin and specimen with a hole in one of its skin as a damage. Through this test, we compared the reduction of compressive strength due to the size of skin damage and the size of the hole. Also, core-free specimen with an open hole under uniaxial loading were tested to produce reference data for comparison with the series tested earlier. As results of the tests, the sandwich beams with damage size and open hole are almost identical, and we concluded that the prediction of compressive strength reduction after impact of the sandwich skin structure can be predicted using an analytical model assuming skin open hole as impact inputs.

고준위폐기물 처분용기를 처분장에서 처분 시 사고로 운송차량에서 추락낙하 하여 지면과 충돌하는 경우 처분용기에 가 해지는 충격력에 의해 처분용기에 응력이 발생한다. 본 논문에서는 고준위폐기물 처분용기의 구조안전성 설계과정의 일환으 로 이와 같은 충격력에 의하여 여러 가지 처분용기 모델에 발생하는 응력에 대한 비교연구를 수행하였다. 연구의 주된 내용 은 이와 같은 비교연구를 통하여 구조적으로 건전한 처분용기의 설계에 관한 것이다. 처분장에서 운반차량으로 처분용기 운 반 중 사고로 추락낙하 하여 지면과의 충돌 시에 처분용기에 가해지는 충격력은 기구동역학해석 상용 컴퓨터코드인 RecurDyn으로 구하였다. 이렇게 구한 충격력에 의하여 여러 가지 처분용기 모델에 발생하는 응력 및 변형은 유한요소해석 상용 컴퓨터코드인 NISA를 이용하여 구하였다. 이 응력과 변형 값들의 비교 검토를 통하여 구조적으로 건전한 처분용기에 대한 연구를 수행하였다. 연구결과 처분용기 내부 고준위폐기물 다발을 감싸는 외곽 벽의 두께가 두꺼워 질수록 또는 처분 용기의 직경이 커질수록 처분용기에 발생하는 응력이 커지는 것을 알 수 있었다. 그러나 처분용기에 가해지는 충격력도 처 분용기의 직경이 커짐에 따라 증가하였다. 그럼에도 불구하고, 단위 충격력 당 발생하는 변형의 크기는 직경이 증가함에 따 라 감소하였다. 따라서 결론적으로 직경이 증가할수록 처분용기는 구조적으로 건전함을 알 수 있었다.

본 연구는 한국의 현행 규제영향분석과정이 기술규제의 중요한 특성들을 반영 하는가를 확인하기 위해 기술규제영향평가 차원에서 규제영향분석의 적절성을 검토하고자 하였다. 기술규제에 대한 분석 틀을 도출하고 이를 이용하여 정부부처가 제출한 규제영향분 석서의 적절성에 대한 분석⋅평가를 수행하였다. 분석결과, [규제의 기술적 타당성], [국내 기 술규범 부합성], [국제 기술규범 부합성], [적합성평가의 타당성]의 관점에서 각 부처가 현행 규제영향분석서에 기재한 사항을 객관적 사실, 대체분석 가능, 전문가적 판단가능 등을 고려 하여 “적절”하다고 판단된 경우는 23.4%에 불과하였고, 각 부처별로도 특별한 차별성은 없었다. 규제 속성에 따른 규제영향분석서의 적절성을 검토해 본 결과, 사회적 규제와 간접적 규제들의 속성을 갖고 있는 기술규제에 대한 규제영향분석서의 적절성이 다소 높았다. 종합하면 실질적 의미의 기술규제영향평가를 수행하기에 현재 우리나라 규제영향분석서 수준은 상 당히 미흡한 편으로 나타났다. 즉, 각 부처가 기술규제를 도입하면서, 해당 규제의 기술적 속성에 대한 이해가 완전하지 않은 것일 수 있다는 것이다. 과학기술적 근거를 제대로 반영하지 못한 규제영향분석서는 해당 기술규제에 대한 타당성을 과장하여 여타의 규제 대안에 대 한 진지한 검토를 저해하는 한편, 글로벌 경쟁체제에서 기업과 국민의 경쟁력 확보를 방해하는 심각한 문제를 초래할 수 있을 것이다.

The paper applies CFD numerical simulation technology, selects the typical urban commercial block as the research object, uses PM I 0 which are from automobile exhausted gas as the source of pollution, simulates the spatial density di stribution of the inhalable pa11icle, verifies the accuracy based on the monitoring data and reveals the diffusion rule of atmospheric pollutants in the three dimensional block space. The results show that there is a close relationship between the diffusion effect of the contaminated gas and three dimensional landscape pattern in blocks. At different height levels such as I 0 meters, 30 meters and 50 meters, the decreasing trend of the density of the pollutants and the uniformity of the spatial distribution are quite obvious. The height of the buildings along the streets, the space combination and the shape of the buildings themselves determine the inner smoothness of the streets. In the urban planning, one must fully consider the effect of three dimensional pattern on air pollution in blocks. From the aspects of urban ventilation, open space, height of the horizon line and disheartened space of the bottom, three dimensional landscape pattern of urban blocks should be optimized, which can effectively improve the current situation of severe atmospheric pollution.

This study analyzed the correlation between Chl-a and water quality factors using characteristics of climate data, water quality factors, and various statistical analysis techniques during the summer season in the Nakdong River during the 2-year period. The purpose of this study is to provide the basic data for establishing water quality management policy in the Changnyeong-Haman weir section. From the end of July to the middle of August when algae mainly occur, both the years 2015 and 2016 are in the temperature range of 25 ~ 30 °C, and the total precipitation of 2015 is less than that of 2016 in this period. As a result of comparing the concentration of Chl-a, the average Chl-a concentration of 2015 was higher than that of 2016, which seems to be related to the total precipitation in the occurrence of algae. The results of the correlation analysis showed that the correlation with PO4-P was significant at most points. As a result of the factor analysis, the first principal factor group classified PO4-P, NH3-N, TP, pH, flow rate, TN and this section seems to be influenced by phosphorus and nitrogen and flow rate.

The objective of this research was to evaluate the effects of two different feeding systems on blood metabolites in Holstein heifers and analyze the economic impacts of the feeding systems. The following two experiments were conducted to investigate the effects of feeding system on blood metabolite changes in Holstein heifers and analyze the economic impacts of the two systems. In experiment 1, the effects of two different feeding systems on cortisol, progesterone, and estradiol in Holstein heifers were examined. In experiment 2, the effects of two different feeding systems on the body weights of Holstein heifers and profitability of the two feeding systems were studied. Results showed that the pasture-raised heifers showed significantly decrease in the levels of blood cortisol (p<0.05) and increases in the levels of progesterone and estradiol (p>0.05) when compared with heifers raised in indoor feeding system. The average daily gain was significantly higher (p<0.05) in indoor-raised heifers (0.73 kg/day) as compared to pasture-raised heifers (0.58 kg/day). Also, 25.2% more profits were obtained from the pasture feeding system as compared to the indoor feeding system. These results together would be useful in the investigation of feeding system and growth performance in dairy cattle.

In several industries, including the agriculture industry, information and communication technology (ICT) expenditure has been gradually increasing. This study explores the ICT investment of Korean agricultural corporations, and examines the effect of ICT investment on their profitability using an IT portfolio framework. As the organizational capabilities and environment in which ICT is used is critical in examining its impact, the IT-savvy level is used as a moderator. An increase in ICT investment size results in a significantly positive effect on profitability in organizations with higher IT-savvy levels, whereas there is no effect in organizations with lower IT-savvy levels. This study shows the necessity of understanding the structure of ICT investments in the agriculture industry, and suggests the importance of organizational capabilities and environment in making best use of ICT.

Recently damage of structures and loss of life by terrorism are internationally increasing. Among these terror that have a possibility to can happen in korea and that can caused lot of human life loss is the vehicle terror. To prevent the vehicle terror, the anti-ram barriers are needed. But domestic standard about anti-ram barriers are not clear. So, in this study, we will utilize and analyze the vehicle impact to evaluate the efficiency of the domestic bollard and suggest the installation standard of those. In Korea, granite, elastic, steel and stainless bollard are used. The performance of those bollard is not available. Elastic bollard couldn’t stop the vehicle, and the others just could stop the vehicle only at the speed under 10kph. Therefore, set the variable to reinforce, and evaluate the defence efficiency of bollard. As a result, granite and elastic bollard was not suitable for the anti-ram barriers. Performance of steel bollard increased as thickness grew. So steel bollard should must be thicker than 10T. And the concrete compressive strength effected insignificantly on the defence efficiency, so more than 24MPa compressive concrete be used. Performance of stainless bollard increased as thickness grew. So stainless bollard should must be thicker than 13T.