탄소섬유 강화 플라스틱 (Carbon fiber reinforced plastics, CFRP)은 고함량의 탄소섬유 (Carbon fiber, CF)와 고분자로 이루어진 복합재료로서, 뛰어난 기계적 성능으로 항공우주, 자동차, 토목 등 다 양한 산업 분야에서 사용되고 있다. 하지만 사용량 증가에 따른 폐기물의 환경문제와 추출한 재활용 탄소섬유 (Recycled carbon fiber, rCF)의 적용 가능 분야의 한계로 인해 재활용이 제한적인 실정이 다. 본 연구에서는 rCF와 CF 혼입 시멘트계 전자파 복합재를 제작하여 그 성능을 비교 분석하기 위 한 실험을 수행하였다. 구성재료는 시멘트, 잔골재, 고성능 감수제를 사용하였으며, 비교 분석을 위해 CF와 rCF를 각각 6 mm, 12 mm 길이를 0.1, 0.3, 0.5, 1.0 wt.% 함량으로 사용하였다. 전자파 복합 재의 흡수 성능 향상을 위해 각각 다른 함량의 다층 구조를 형성하였으며, 전자파 투과를 낮은 함량에 서 높은 함량 방향이 되도록 측정을 진행하였다. 전자파 차폐성능은 재령 28일 이후 네트워크 분석기 를 사용하여 자유 공간에서 측정하였으며, C-band (4~8 GHz)와 X-band (8~12 GHz) 주파수 영역 에서의 반사율과 투과율을 각각 측정하였다.

PURPOSES : The numeric-based Highway Pavement Management System (HPMS), along with an advanced three-dimensional pavement condition monitoring profiler vehicle (3DPM), in South Korea has presented remarkable advancements in pavement management since the early 2000. Based on these results, visual distress on pavement surfaces can be easily detected and analyzed. Additionally, the entire expressway pavement surface conditions in South Korea can be easily monitored using the current graphical user interface-based advanced information graphic (AIG) approach. Therefore, a critically negative pavement section can be detected and managed more easily and efficiently. However, the actual mechanical performance of the selected pavement layer still needs to be investigated in a more thorough manner not only to provide more accurate pavement performance results but also to verify the feasibility of the current 3DPM and AIG approaches. In this study, the low-temperature performance of the selected asphalt pavement layer section was evaluated to further verify and strengthen the feasibility of the current 3DPM and AIG approaches developed by the Korea Expressway Corporation. METHODS : Based on 3DPM and AIG approach, the positive and negative-riding-quality road sections were selected, respectively. The asphalt material cores were extracted from each section then bending beam rheometer mixture creep test was performed to measure their low-temperature properties. Based on the experimental results, thermal stress results were computed and visually compared. RESULTS : As expected, the asphalt material from the negative driving performance section presented a poorer low-temperature cracking resistance than that from the positive driving performance section. CONCLUSIONS : Current 3DPM equipment can successfully evaluate expressway surface conditions and the corresponding material performance quality. However, more extensive experimental studies are recommended to verify and strengthen the findings of this study

PURPOSES : The purpose of this study was to quantitatively evaluate the variability of LiDAR performance indicators, such as intensity and Number of Point Cloud(NPC), according to various environmental factors and material characteristics. METHODS : To consider the material characteristics of road safety facilities, various materials (Reference Material(RM), reflective sheet, matte sheet, granite, plastic, and rubber) were used in a darkroom, and the performance indicators of LiDAR were repeatedly measured in terms of changes in the measurement distance, rainfall, and angle of observation. RESULTS : In the case of standard reflective materials, the intensity measurement value decreased as the measurement distance and rainfall increased. The NPC showed a tendency to decrease as the measurement distance increased, regardless of rainfall intensity. For materials with high-intensity values, it was found that rainfall intensity and color had negligible effect on the change in intensity compared with the measurement distance. However, for materials with low-intensity values, it was found that the measurement distance, rainfall intensity, and color all had a significant effect on the change in intensity. CONCLUSIONS : For materials with high-intensity values, it was found that rainfall and color had negligible effect on change in intensity compared with the measurement distance. However, for materials with low-intensity values, the measurement distance, rainfall, and color all had a significant effect on the change in intensity value.

Glass wool is widely used as a typical soundproofing material because it has superior characteristics as a soundproofing material as well as excellent marketability. However, moisture penetration through condensation and cleaning up causes deterioration of insulation and soundproofing performance. In this study, we evaluate the wettability and sound absorption performance when the metal is deposited on the surface of glass wool. The performance is examined based on parameters such as the angle test, drying speed, the absorbency, the moisture content, the wettability. The wettability data shows that Cu coated glass wool is the best performance compaed to Ti coated one. The sound insulation characteristics are also compared by using the impedance tube. At the low frequency range, there is no difference among the test specimens, however, at the frequency above the 250 Hz range, Cu coating shows 10 % better in th sound asorption. Ti coating has almost same to the existing glasss wool performance. It turns out that metal coating on the glass wool seems to be very promising: the metal deposition reveals strong water repellency and sound absorption performance is equivalent to the existing glass wool.

In this study, we conducted a shake table test to verify the seismic performance of the paneling system with steel truss composed of bolt connections. The control group was set to the traditional paneling system with steel truss connected by spot welding method. Test results showed that the bolted connection type paneling system has excellent deformation capacity without cracking or brittle fracture of the steel truss connection parts compared to the welding type paneling system. Furthermore, in the bolted connection type, slight damage occurred at the time of occurrence of the same story drift angle as compared with the existing method, it is considered that it has excellent seismic performance. In compliance with the performance-based design recommended for the current code (ASCE 41-13) on non-structural components, it is judged that in the case of the bolted connection type paneling system, it can be applied to all risk category structures without restriction. However, in the case of traditional paneling system with spot welding method, it is considered that it can be applied limitedly.

To satisfy the demand of higher cutting performance, mechanical properties with tungsten carbide (WC-Co) tool materials were investigated. Hardness and transverse rupture strength with WC grain size, Co content and density were measured. Compared to H, K, and S manufacture maker as tungsten carbide (WC-Co) tool materials were used for high-speed machining of end-milling operation. The three tungsten carbide (WC-Co) tool materials were evaluated by cutting of STD 11 cold-worked die steel (HRC25) under high-speed cutting condition. Also, tool life was obtained from measuring flank wear by CCD wear measuring system. Tool dynamometer was used to measure cutting force. The cutting force and tool wear are discussed along with tool material characteristics. Consequently, the end-mill of K, H manufacture maker showed higher wear-resistance due to its higher hardness, while the S maker endmill tool showed better performance for high metal removal.

본 연구에서는 캐스트 인 채널의 반복가력 시험을 수행하고 그 성능을 평가하였다. 반복가력 시험결과, 1,111,111번 동안 콘크리트 파괴 및 캐스트 인 채널 파괴는 발생하지 않았다. 또한, 캐스트 인 채널의 인발강도를 반복가력 시험 전․후로 나누어 평가한 결과 최대하중 차이는 1.5kN로 나타나 매립형 찬넬의 내구성 및 안전성은 확보된 것으로 판단된다.

본 연구에서는 프라이머 도포 여·부 및 압축강도수준 그리고 바닥 마감재 시공재령에 따른 주차장용 바닥 마감재 부착성능을 평가 하였다. 또한 현행 KS 기준에서는 바닥 마감재 부착성능을 모르타르 공시체를 활용하여 평가하도록 제안하고 있지만, 실제 현장에서 바닥 마 감재는 콘크리트 상부면에 시공되기 때문에 바탕면 변화에 따른 부착성능을 추가변수로 계획하여 평가를 진행하였다. 모르타르는 현행기준에 서 제안하고 있는 배합표에 준하여 제작하였으며, 콘크리트 설계기준강도는 18, 30, 50 MPa로 계획하였다. 프라이머는 모르타르 및 콘크리트 재령 28일 변수에 따라 바닥 마감재와 함께 도포되었으며, KS 기준에 준하여 바닥 마감재 재령 일에 따라 부착성능을 평가하였다. 변수에 따른 부착성능 평가결과 바닥 마감재 재령이 경과함에 따라 바닥 마감재 부착성능은 향상되는 것으로 나타났으며, 압축강도가 높아짐에 따라 바닥 마감재 부착성능 또한 향상되는 것으로 나타났다. 이는 파괴양상을 고려하였을 때 콘크리트 쪼갬 인장강도의 영향을 받은 것으로 판단된다. 프 라이머 도포에 따른 부착성능은 유사한 것으로 나타났으며, 프라이머의 사용은 부착강도에 문제없이 콘크리트 표면의 내구성을 향상시킬 수 있을 것으로 판단된다. 또한 콘크리트 및 모르타르 바탕면의 부착강도 특성을 비교한 결과 바닥재의 부착강도는 구성재료 보다 압축강도에 큰 영향을 받는 것으로 나타났다. 따라서 현행 KS 기준의 모르타르 바탕면 실험체의 부착강도를 근거로 실제현장의 부착강도를 예측할 수 있을 것으로 판단된다.

현재 전 세계적으로 석탄, 석유 등 화석연료의 사용으로 지구 온난화가 진행되고 있다. 이러한 원인으로 폭염, 폭설, 폭우 및 슈퍼태풍 등과 같은 이상기후, 극한기후 현상이 지속적으로 증가 하고 있다. 또한 심각한 자연재해로 콘크리트 구조물 및 사회기반시설의 심각한 손상과 붕괴가 발생한다. 이러한 문제들을 해결하기 위해서는 기후변화에 적합한 기준 및 시공 기술 등이 필요한 실정이므로 본 연구에서는다양한 온도와 습도 양생조건이 콘크리트 배합에 미치는 영향을 검토해 보았다. 다양한 온도와 습도 조건에서 양생된 콘크리트의 압축강도와 할렬인장강도 실험을 수행하였다. 또한 성능중심평가 (performance based evaluation (PBE))방법을 사용하여 다양한 양생조건에서 경화된 콘크리트 강도의 만족도확률을 평가하였다. 또한 콘크리트의 성능중심평가로부터 얻는 결과 값을 바탕으로 기후변화가 배합에 미치는영향을 고려하여 배합설계에 적용할 수 있다.

This paper deals with an experimental study on the tensile performance of recently developed “FRP Hybrid Bars” by authors. The objective of this study is to investigate tensile strength of FRP Hybrid Bars. FRP Hybrid Bar uses the concept of material hybridization to increase elastic modulus to be used in concrete structures, especially for marine and port concrete structures. The effect of hybridization on tensile properties of FRP Hybrid Bars was evaluated by comparing the results of tensile test with those of non-hybrid FRP bars. The results of this study indicated that the elastic modulus of the hybrid GFRP bar was increased by up to approximately 5 to 204 percent by the material hybridization.

In this strudy, it establish nonlinear finite element analysis for beam-to-column connections constituted high strength steel beam and general mild steel beam. it analyze major structural performance of connections according to stiffness and strength of both-way beams and it consider the structural problem of application of high strength steel beam through the analysis results.

Several researches of durability are proceeded domestically and internationally based on this circumstances and apply various integrity evaluation techniques and reinforcement methods of reinforced concrete structures to maintain the durability. Application of building coating materials on building external is effective as a popular material method to maintain durability of reinforced concrete structures as design.