According to attached Table 1 of the Enforcement Ordinance of the Nuclear Safety Act, the effective dose limit of transport workers shall not exceed 6 mSv per year. In addition, the enforcement ordinance defines a transport worker as a person who transports radioactive substances outside the radiation management area and does not correspond to a radiation worker. In the nuclear power plants (NPPs), substances in radiation management areas are frequently transported inside or outside the plant. During loading of substances in the radiation management area onto the vehicle, the transport workers (including driver) are located outside the radiation management area. And also the exposure dose of transport workers is managed by using Automatic Dose Reader (ADR). However, the exposure dose of transport workers managed by NPP licensee is limited to the exposure caused by the transport actions required by the plant. This means that radiation exposure caused by the transport of radioactive materials carried out separately by individual transport workers other than the plant requirements cannot be managed. Therefore, even if the NPP licensee manages the transport worker’s dose below 6 mSv, it is difficult to guarantee that the total annual exposure dose, including the transport worker’s individual transport behavior, is less than 6 mSv. Therefore, it would be appropriate to manage the dose of the transport worker by the transport worker’s agency rather than by the NPP licensee.

Kori-1 and Wolseong-1 nuclear power plants were permanently shut down in June 2017 and December 2019, and are currently in the preparation stage for decommissioning. In this regard, it is necessary to secure nuclear power plant decommissioning capacity in preparation for the domestic decommissioning marketplace. To address this, the Korea Research Institute of Decommissioning (KRID) was established to build a framework for the development of integrated nuclear decommissioning technology to support the nuclear decommissioning industry. The institute is currently under construction in the Busan-Ulsan border area, and a branch is planned to be established in the Gyeongju area. Recently, R&D projects have been launched to develop equipment for the demonstration and support verification of decommissioning technology. As part of the R&D project titled “Development and demonstration of the system for radioactivity measurement at the decommissioning site of a nuclear power plant”, we introduce the plan to develop a radioactivity measurement system at the decommissioning site and establish a demonstration system. The tasks include (1) measurement of soil radioactive contamination and classification system, (2) visualization system for massive dismantling of nuclear facilities, (3) automatic remote measurement equipment for surface contamination, and (4) bulk clearance verification equipment. The final goal is to develop a real-time measurement and classification system for contaminated soil at the decommissioning site, and to establish a demonstration system for nuclear power plant decommissioning. The KRID aims to contribute and support the technological independence and commercialization for domestic decommissioning sites remediation of nuclear power plant decommissioning site by establishing a field applicability evaluation system for the environmental remediation technology and equipment demonstration.

Among the twenty six nuclear power plants in Korea, twenty four plants are currently in operation excluding the two permanently shut-down Kori #1 and Wolsung #1 plants. The decommissioning process includes many tasks such as cutting, decontamination, disposal and treatment. Among the tasks, because cutting is one of the tasks performed close to the target structure, there is a possibility for the workers to be exposed excessively to the radiation. There are representative large structures such as steam generators, nuclear reactors, reactor coolant pump, and pressurizer, made of metals, and radioactive concrete, made of concrete. Especially, compared to the trend of research to manage the radiation exposure of steam generators that are directly connected to pressurizers, the trend of research to manage the radiation exposure of pressurizers to workers is not satisfactory. Moreover, although there have been many studies on radioactive concrete, the studies to manage the radiation exposure to workers with a systematic cutting scenario are insufficient. In this study, radioactive concrete, a representative large structure made of concrete, was selected as the target for evaluation. The conditions for evaluation were cutting speed (1~10 m2/hr) and the time for cutting (permanent shutdown~30 years after the shutdown). A cutting scenario was developed by applying the situation for abrasive decontamination beforehand and Hot-to-Cold and Cold-to-Hot, and effort was made to derive a reasonable plan. The evaluation result derived were hourly radiation dose distribution of 1.19~0.103 mSv/hour and 1.29~0.0113 mSv/hour for a scenario without abrasive decontamination (in the order of Hot to Cold, Cold to Hot), and hourly radiation dose distribution of 0.547~0.0479 mSv/hour and 0.608~0.0522 mSv/hour for a scenario with abrasive decontamination. The maximum value of collective dose derived was 1.54E+04 mSv at the cutting time of permanent shutdown with cutting speed of 1 m2/hour in the Cold to Hot scenario before abrasive decontamination, and the minimum value derived was 5.15E+01 mSv at the cutting time of 30-year after the permanent shutdown with cutting speed of 10 m2/hour in the Hot to Cold scenario after abrasive decontamination.

The type of radioactive waste that may occur in the process of nuclear power plant dismantling can be classified into solid, liquid, gas, and mixed waste. In addition, according to the level of radioactivity, it can be divided into high level, intermediate level, low level, and clearance level waste. In the case of solid radioactive waste, it is necessary to secure disposal suitability in order to deliver it to a disposal facility, so safe and efficient treatment of a large amount of radioactive waste generated during decommissioning is one of the most important issues. For the treatment of radioactive waste generated during decommissioning, technologies in various fields such as cutting, decontamination, melting, measurement, and packaging are required. Therefore, this study intends to present and application plan for decommissioning domestic nuclear power plants through overseas case studies for the treatment of radioactive waste expected to occur during nuclear power plant decommissioning.

The concept of clearance is to manage radioactive waste by incineration, reclamation, or recycling as non-radioactive waste, excluding those found to have a concentration of less than the allowable concentration of clearance. Among the types of waste subject to clearance, concrete is managed by recycling and landfill, metal by recycling and reuse, combustible materials by incineration, and soil by landfill. In Korea, clearance has been implemented in earnest since 2000, and the types and quantity of waste subject to clearance are increasing. For clearance, the nuclear-related operator submits its clearance plan to the regulatory body, and the regulatory body reviews the clearance plan and notifies the operator of its suitability. Since a significant amount of radioactive waste generated when decommissioning nuclear power plants is expected to be classified as clearance waste, this study will present clearance waste disposal measures for nuclear power plant through a review of overseas cases related to clearance.

Transport packages have been developed to transport the decommissioning waste from the nuclear power plant. The packages are classified with Type IP-2 package. The IAEA requirements for Type IP-2 packages include that a free drop test should be performed for normal conditions of transport. In this study, drop tests of the packages were performed to prove the structural integrity and to verify the reliability of the analysis results by comparing the test and analysis results. Half-scale models were used for the drop tests and drop position was considered as 0.3 m oblique drop on packages weighing more than 15 tons. The strain and impact acceleration data were obtained to verify the reliability of the analysis results. Before and after the drop tests, radiation shielding tests were performed to confirm that the dose rate increase was within 20% at the external surface of the package. Also, measurement of bolt torque, and visual inspection were performed to confirm the loss or dispersion of the radioactive contents. After each drop test, slight deformations occurred in some packages. However, there was no loss of pretension in the lid bolts and the shielding thickness was not reduced for metal shields. In the package with concrete shield, the surface dose rate did not increase and there was no cracks or damage to the concrete. Therefore, the transport packages met the legal requirements (no more than a 20% increase of radiation level and no loss or dispersion of radioactive contents). Safety verifications were performed using the measured strain and acceleration data from the test, and the appropriate conservatism for the analysis results and the validity of the analysis model were confirmed. Therefore, it was found that the structural integrity of the packages was maintained under the drop test conditions. The results of this study were used as design data of the transport packages, and the packages will be used in the NPP decommissioning project in the future.

Fault activity acts as the greatest risk factor in relation to the stability of the radioactive waste disposal facilities and nuclear power plant site, and for this reason, geological studies on areas with past fault activity history must precede site evaluation studies. This study aims to trace the fault activity history of large fault zones, including the Yangsan fault in the southeastern part of the Korean Peninsula, where two major earthquakes occurred, and to obtain fault activity direction information that is the basis for stability evaluation. The 3D-Shape Preferred Orientation (SPO) of particles in the fault rock created by the earthquake was investigated to analyze the direction of fault plane activity, and the age of fault activity was estimated through Illite Age Analysis (IAA) analysis. It is expected that the large-scale fault activity information in the southeastern part of the Korean Peninsula obtained through the SPO and IAA analysis can be used as basic data for safety evaluation of existing or future nuclear power plants and radioactive waste facilities.

Considering the non-linear behavior of structure and soil when evaluating a nuclear power plant's seismic safety under a beyond-design basis earthquake is essential. In order to obtain the nonlinear response of a nuclear power plant structure, a time-domain SSI analysis method that considers the nonlinearity of soil and structure and the nonlinear Soil-Structure Interaction (SSI) effect is necessary. The Boundary Reaction Method (BRM) is a time-domain SSI analysis method. The BRM can be applied effectively with a Perfectly Matched Layer (PML), which is an effective energy absorbing boundary condition. The BRM has a characteristic that the magnitude of the response in far-field soil increases as the boundary interface of the effective seismic load moves outward. In addition, the PML has poor absorption performance of low-frequency waves. For this reason, the accuracy of the low-frequency response may be degraded when analyzing the combination of the BRM and the PML. In this study, the accuracy of the analysis response was improved by adjusting the PML input parameters to improve this problem. The accuracy of the response was evaluated by using the analysis response using KIESSI-3D, a frequency domain SSI analysis program, as a reference solution. As a result of the analysis applying the optimal PML parameter, the average error rate of the acceleration response spectrum for 9 degrees of freedom of the structure was 3.40%, which was highly similar to the reference result. In addition, time-domain nonlinear SSI analysis was performed with the soil's nonlinearity to show this study's applicability. As a result of nonlinear SSI analysis, plastic deformation was concentrated in the soil around the foundation. The analysis results found that the analysis method combining BRM and PML can be effectively applied to the seismic response analysis of nuclear power plant structures.

‘탄소중립’에 대한 관심이 높아짐에 따라 CO2를 농업적으 로 이용하기 위한 시도가 증가하고 있다. 본 실험은 발전소에 서 부산물로 배출되는 CO2를 포집하여 액화·정제 후 시설 엽 채류의 생육 및 생산성 증대를 위한 시비용 CO2로의 활용 가 능성을 평가하기 위해 수행되었다. 경상남도 하동지역의 부추, 취나물, 미나리 농장에 드라이아이스가 공급되었고 각 농 장의 온실 중 하나의 온실은 대조군, 하나의 온실은 CO2 처리 구로 사용되었다. CO2의 시비는 자체 제작한 장치를 사용하 여 드라이아이스에서 승화된 가스를 온실에 공급했다. 부추 온실은 대조군과 CO2 처리에서 온실 내 CO2 농도의 차이가 없었고 두 온실 모두 높은 CO2 농도를 보였다. 반면에 취나물 과 미나리 온실에서는 CO2 시비 처리에서 높은 CO2 농도가 측정되었다. 취나물 및 미나리의 생육은 CO2 시비 처리구에 서 유의성 있게 증가하였으며 수확량도 각각 36%와 25%로 증가하였다. 경제성 분석 결과, 취나물 농가에서는 소득률이 증가하였지만, 부추와 미나리 농가는 감소하는 것으로 나타 났다. 따라서 화력발전소에서 부산물로 발생한 드라이아이스 의 이용은 시설 엽채류의 생산성을 높일 수 있었다

This study presents a rapid and quantitative radiochemical separation method for Nb isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin after Fe coprecipitation. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the Nb isotopes were coprecipitated with Fe after filtering the leaching solution with 0.45 micron HA filter, while the Sr, Tc and Ni isotopes were in the solution. The Nb isotopes were separated in HCl medium with anion exchange resin. The purified Nb isotopes were measured using a low level liquid scintillation counter after installing quenching curve with standard Nb-94 isotopes. The separation method for Nb isotopes investigated in this study was applied to neutron dosimeter samples from the nuclear power plant after validating the Nb activity concentration with gamma spectrometry system.

The decommissioning of a nuclear power plant is a project that consists of several stages, and various technologies are applied when performing various tasks at each stage. And it is essential to secure safety and economic feasibility. As the paradigm has changed due to digital transformation in various industries, digitalization is applied to the life cycle of nuclear power plant from construction, operation and decommissioning project. Element technologies are being developed for decommissioning plan establishment, process design, econtamination method, decommissioning work process, waste management, environmental monitoring and radiation dose simulation. The utilization of digital twin in the decommissioning stage is classified into three categories. ① Process Monitoring (decommissioning work procedure, work progress (plan/actual), real-time work status and etc.) ② Facility Monitoring (real-time sensing and video data monitoring, decommissioning SSCs information, work alarm and etc.) ③ Safety Monitoring (work safety, radiation exposure, fire monitoring, work risk and etc.) A system suitable for the decommissioning stage and work should be developed in consideration of the target of use, development function, and when to create data according to the purpose of the system. Simulation module according to user purpose should be provided. In addition, data-base management should be performed according to the decommissioning characteristics in consideration of the data associated with the existing operating system. The system to be developed should support the project management to comply with the domestic standards and regulations to be determined in the future. This will improve the competitiveness of domestic and foreign markets.

Under Article 17 of the Radioactive Waste Management Act and Article 12 of the Enforcement Decree of the Radioactive Waste Management Act, KHNP shall reserve the cost for the decommissioning of NPPs as provisions. To preserve the value, an additional amount considering the discount rate is to be added annually. The initial provision is decided by estimating the decommissioning cost of NPP at the time of commercial operation, calculating the future cost by applying the inflation rate to the expected start date of decommissioning, and then discounting it at a discount rate to the present value. According to the current notice, the period for applying inflation and discount rate is defined as the period of 5 years added to the design life of NPP, which is presumed to be due to the assumption that all decommissioning costs are incurred at once 5 years after the permanent shutdown of the power plant. However, assuming that the actual decommissioning period of a domestic nuclear power plant is generally planned for 15 years, it can be expected that most of the decommissioning activities will begin after the decommissioning preparation and transition period, or 5 years after permanent shutdown of the plant. Considering this, it can be said that the current period (5 years + design life) for applying inflation and discount rate is set a little conservatively. In this paper, the initial provision is calculated by appropriately distributing the decommissioning costs of overseas NPPs categorized by International Structure for Decommissioning Costing (ISDC) during the planned decommissioning period of domestic NPPs, and then adding up the decommissioning cost each year by separately applying the inflation and discount period, which was compared with the results calculated using the current method. Through this, it was confirmed that the revised method had the effect of reducing the initial provision by 2.2% to 5.7% compared to the current method depending on the gap between inflation rate and discount rate, which can be converted to about 8 years of inflation and discount period used in the current method. It is expected that this paper will be used in the future as a basic reference for developing a more accurate method for calculating the initial provision of decommissioning cost.

The decommissioning of nuclear power plant (NPP) consists of various activities, such system decontamination, take out of activated components, segmentation of the activated components, site remediation, etc. During various activities, the generation of radioactive wastes and radiation exposure to workers is expected. The systematic waste management during the activities is important to implement the decommissioning. The inefficient waste management usually bring significant delay in decommissioning process and results in increase of decommissioning cost. The radiation exposure management is also an important issue. It is generally accepted that the hot spot, generated from operation and decommissioning of NPP, is observed in many places within containment building. Although the health physicists measure the radiation in various points, the unintended hot spots are sometimes generated and observed. The effective radiation exposure management also requires the control of personnel and space during various activities. In this study, the radiation exposure and waste management experiences of Zion NPP is reviewed. The primary nuclides and radiation exposure during various activities are systematically studied to achieve the main objectives of this paper.

Reliable evaluation of radioactivity inventory for the nuclear power plant components and residual materials is very important for decontamination and decommissioning. This can make it possible to define optimum dismantling approaches, to determine radioactive waste management strategies, and to estimate the project costs reasonably. To calculate radioactivity of the nuclear power plant structure, various information such as interest nuclide, cross-section, decay constant, irradiation time, neutron flux, and so on is required. Especially irradiation time and neutron flux level are very changeable due to cycle specific fuel loading pattern, the plant overhaul, cycle length. However most of the radioactivity calculations have generally been performed assuming one representative or average neutron flux during the lifetime of the nuclear power plant. This assumption may include excessive conservatism because the radioactivity level has the characteristics of saturation and decay. Therefore, considering these variables as realistically as possible could prevent overestimation. In order to perform realistic radioactivity calculation, we developed monthly relative power contribution factor applying plant-specific operation history and cycle-specific neutron flux. The factors were applied to the radioactivity calculation. The calculation results ware compared with measured values of the neutron monitors that were actually installed and withdrawn from the nuclear power plant. As a result of the comparisons, there are good agreements between the calculated values and measured values. These accurate calculation results of radioactivity could contribute to the establishment of radioactive waste dismantling strategies, the classification of radioactive waste, and the deposit of disposal costs for safe and reasonable decommissioning of the nuclear power plant.

Solid radioactive waste such as rubble, trimmed trees, contaminated soil, metal, concrete, used protective clothing, secondary waste, etc. are being generated due to the Fukushima nuclear power plant accident occurred on March 11, 2011. Solid radioactive waste inside of Fukushima NPP is estimated to be about 790,000 m3. The solid radioactive waste includes combustible rubble, trimmed trees, and used protective clothing, and is about 290,000 m3. These will be incinerated, reduced to about 20,000 m3 and stored in solid waste storage. The radioactive waste incinerator was completed in 2021. About 60,000 m3 of rubble containing metal and concrete with a surface dose rate of 1 mSv/h or higher will be stored without reduction treatment. Metal with a surface dose rate of 1 mSv/h or less are molten, and concrete undergoes a crushing process. About 60,000 m3 of contaminated soil (0.005 ~1 mSv/h) will be managed in solid waste storage without reduction treatment. The amount of secondary waste generated during the treatment of contaminated water is about 6,500 huge tanks, and additional research is being conducted on future treatment methods.

In 2017, Kori unit 1 nuclear power plant was permanently shut down at the end of its life. Currently, Historical Site Assessment (HSA) for MARSSIM characteristics evaluation is being conducted according to the NUREG-1575 procedure, this is conducted through comprehensive details such as radiological characteristics preliminary investigation and on-site interview. Thus, the decommissioning of nuclear power plant must consider safety and economic feasibility of structures and sites. For this purpose, the establishment of optimal work plan is required which simulations in various fields. This study aims to establish procedure that can form a basis for a rational decommissioning plan using the virtual nuclear power plant model. The mapping procedure for 3D platform implementation consisted of three steps. First, scan the inside and outside of the nuclear power plant for decommissioning structure analysis, 3D modeling is performed based on the data. After that, a platform is designed to directly measure the radiation dose rate and mapped the derived to the program. Finally, mapping the radiation dose rate for each point in 3D using the radiation dose rate calculation factor according to the time change the measured value created on the 3D mapping platform. When the mapping is completed, it is possible to manage the exposure dose of workers according to the ALARA principle through the charge of radiation dose rate over time because of visualization of the color difference to the radiation dose rate at each point. For addition, the exposure dose evaluation considering the movement route and economic feasibility can be considered using developed program. As the interest in safety accidents for workers increases, the importance of minimum radiation dose and optimal work plan for workers is becoming increasingly important. Through this mapping procedure, it will be possible to contribute to the establishment of reasonable process for dismantling nuclear power plant in the future.

Regulations on the concentration of boron discharged from industrial facilities, including nuclear power plants, are increasingly being strengthened worldwide. Since boron exists as boric acid at pH 7 or lower, it is very difficult to remove it in the existing LRS (Liquid Radwaste System) using RO and ion exchange resin. As an alternative technology for removing boron emitted from nuclear power plants, the electrochemical boron removal technology, which has been experimentally applied at the Ringhal Power Plant in Sweden, was introduced in the last presentation. In this study, the internal structure of the electrochemical module was improved to reduce the boron concentration to 5 mg/L or less in the 50 mg/L level of boron-containing waste liquid. In addition, the applicability of the electrochemical boron removal technology was evaluated by increasing the capacity of the unit module to 1 m3/hr in consideration of the actual capacity of the monitor tank of the nuclear power plant. By applying various experimental conditions such as flow rate and pressure, the optimum boron removal conditions using electrochemical technology were confirmed, and various operating conditions necessary for actual operation were established by configuring a concentrated water recirculation system to minimize secondary waste generation. The optimal arrangement method of the 1 m3/hr unit module developed in this study was reviewed by performing mathematical modeling based on the actual capacity of monitor tank and discharge characteristics of nuclear power plant.

Nuclear power plants (NPPs) are designed in consideration of redundancy, diversity, and independence to prevent leakage of radioactive materials from safety of view, and a contingency plan is established in case of DBA (Design Basis Accident) occurrence. In addition, NPPs have established contingency plans for physical attacks, including terrorist intrusions and bomb attacks. However, the level of contingency plan caused by cyberattacks is quite insufficient compared to the contingency plan in terms of safety and physical protection. The purpose of this paper is to present the problems of cyberattack contingency plan and methods to supplement it. The first problem with cyberattack contingency plan is that the initiating event for implementing the contingency plan is undecided. In terms of safety, the DBA is identified as an initial event, and each contingency plan is based on the initial events specified in the DBA such as Loss of Coolant Accident and Loss of Offsite Power. In terms of physical protection, each has a contingency plan by identifying bomb attacks and terrorist intrusions in Protected Area and Vital Area as initial events. On the other hand, in the contingency plan related to a cyberattack, an initial event caused by a cyberattack is not identified. For this, it is necessary to classify the attack results that may occur when the CDA is compromised based on the attack technique described in Design Basis Threat. Based on this, an initiating event should be selected and a contingency plan according to each initiating event should be established. The second problem is that there is no responsibility matrix according to the occurrence of the initiating event. From a safety point of view, when a DBA occurs, the organization’s mission according to each initial event is described in the contingency plan, and related countermeasures are defined in case of an accident through Emergency Operation Procedure. In the case of physical protection, referring to IAEA’s Regulatory Guide 5.54, the organization’s responsibility is defined in matrix form when an initial event such as a bomb attack occurs. In this way, the responsibility matrix to be carried out in case of initiating events based on the defined initial event should be described in the contingency plan. In this paper, the problems of the cyberattack contingency plan are presented, and for this purpose, the definition of the initial event and the need for a responsibility matrix when the initial event occurs are presented.