of hazardous risk factors, risk estimation and determination steps by reflecting the trend of overseas risk assessment. METHODS : In deriving, estimating and determining risk factors, comparing the procedures presented by the ILO with the domestic guidline to find out the differences in procedural. and, According to the domestic manual, after setting the criteria for determining a deterministic perspective, analyze the risk assessment data of a specific domestic company and three overseas risk assessment research data to analyze the differences in methodology domestic and abroad. RESULTS : Within the country, there is a possibility that a deterministic view may be applied to all stages of procedure, and certain corporate data to the risk estimation and determination stage. In the case of overseas, the trend of applying deterministic perspectives to the risk determination stage was confirmed. CONCLUSIONS : Present the need for a standard model for improving deterministic methods in the other two stages, excluding risk determination in the domestic evaluation procedure.

In this study, dual drainage system based runoff model was established for W-drainage area in G-si, and considering the various rainfall characteristics determined using Huff and Mononobe methods, the degree of flooding in the target area was analyzed and the risk was compared and analyzed through the risk matrix method. As a result, the Monobe method compared to the Huff method was analyzed to be suitable analysis for flooding of recent heavy rain, and the validity of the dynamic risk assessment considering the weight of the occurrence probability as the return period was verified through the risk matrix-based analysis. However, since the definition and estimating criteria of the flood risk matrix proposed in this study are based on the return period for extreme rainfall and the depth of flooding according to the results of applying the dual drainage model, there is a limitation in that it is difficult to consider the main factors which are direct impact on inland flooding such as city maintenance and life protection functions. In the future, if various factors affecting inland flood damage are reflected in addition to the amount of flood damage, the flood risk matrix concept proposed in this study can be used as basic information for preparation and prevention of inland flooding, as well as it is judged that it can be considered as a major evaluation item in the selection of the priority management area for sewage maintenance for countermeasures against inland flooding.

In this study, dual drainage system based runoff model was established for W-drainage area in G-si, and considering the various rainfall characteristics determined using Huff and Mononobe methods, the degree of flooding in the target area was analyzed and the risk was compared and analyzed through the risk matrix method. As a result, the Monobe method compared to the Huff method was analyzed to be suitable analysis for flooding of recent heavy rain, and the validity of the dynamic risk assessment considering the weight of the occurrence probability as the return period was verified through the risk matrix-based analysis. However, since the definition and estimating criteria of the flood risk matrix proposed in this study are based on the return period for extreme rainfall and the depth of flooding according to the results of applying the dual drainage model, there is a limitation in that it is difficult to consider the main factors which are direct impact on inland flooding such as city maintenance and life protection functions. In the future, if various factors affecting inland flood damage are reflected in addition to the amount of flood damage, the flood risk matrix concept proposed in this study can be used as basic information for preparation and prevention of inland flooding, as well as it is judged that it can be considered as a major evaluation item in the selection of the priority management area for sewage maintenance for countermeasures against inland flooding.

이 연구는 운항자가 항해 중 위험을 느끼는 고정 및 이동 물표에 대한 해상교통위험성평가에 대한 것이다. 이를 위해 선박 길이와 속력, 선박조종성능이 고려된 동적선박영역을 기초로 한 충돌위험평가식을 구하였다. 특히, 동적선박영역과 충돌위험평가식을 하이브리드 결합하여 자선의 크기, 속력 등의 영향을 정량적으로 지표화한 항해위험성평가모델을 검토 및 개선하고자 한 것이다. 기존 항해위험성평가 모델에 적용이 부족한 속장비(speed length ratio) 즉, 선박의 길이와 속력에 대한 비가 고려된 새로운 형태의 해상교통위험성평가 모델을 제안하고자 한다. 그 결과 무차원 속력 즉, 속장비가 클수록 CJ 값이 크며, CJ 값은 속장비에 의해 잘 표현되고 있다. 또한, 속장비가 크면 속장비가 작은 경우보다, 보다 먼 거리에서부터 [주의], [경계], [위험] 또는 [매우위험]상태에 도달한다. 이 연구의 결과는 위험항로 회피 또는 최적항로 구축, 방파제폭이나 교량경간 등을 포함한 항로나 항만개발, 연안항해용 안전해도 개발 및 향후 자율운항선박과 같은 스마트선박의 운항 중 충돌방지와 최적항로 선정에 자료로 사용될 수 있을 것이다.

Abstract It has come to attention that a risk-assessing organization, that will benchmark a company’s safety department, is imperative, following an increase in large-scale SOC-business project, construction of higher-raised buildings, development of underground space; all that have increase accident rates. Having faced problems that arise in firms that demand diversity, complexity and instantaneity, the purpose of the thesis is to arrive at efficient and practical problem-solving means. In order to solve the problems that would surface theoretically during an actual risk assessment, the state of the operation systems of the top five national construction firms having a hazard rate of 0.25 times less than the average rate have been analyzed, while a hierarchal recognition research of the employees who not only function at the operating level but are the practice subjects of a firm, has also been conducted, bringing the main text.

As the global uncertainty of manufacturing has increased and the quality problem has become global, the recall has become a fatal risk that determines the durability of the company. In addition, as the convergence of PSS (product-service system) product becomes common due to the development of IT convergence technology, if the function of any part of hardware or software does not operate normally, there will be a problem in the entire function of PSS product. In order to manage the quality of such PSS products in a stable manner, a new approaches is needed to analyze and manage the hardware and software parts at the same time. However, the Fishbone diagram, FTA, and FMEA, which are widely used to interpret the current quality problem, are not suitable for analyzing the quality problem by considering the hardware and software at the same time. In this paper, a quality risk assessment model combining FTA and FMEA based on defect rate to be assessed daily on site to manage quality and fishbone diagram used in group activity to solve defective problem. The proposed FTA-FMEA based risk assessment model considers the system structure characteristics of the defect factors in terms of the relationship between hardware and software, and further recognizes and manages them as risk. In order to evaluate the proposed model, we applied the functions of ITS (intelligent transportation system). It is expected that the proposed model will be more effective in assessing quality risks of PSS products because it evaluates the structural characteristics of products and causes of defects considering hardware and software together.

본 연구에서는 강풍 위험 모델과 강풍 취약도 모델을 개발하여 옥외 광고물의 강풍 위험도를 정량적으로 평가하였다. 강풍 위험 모델과 강풍 취약도 모델 모두 확률론적 접근법인 몬테카를로 모사 모형을 적용하여 개발되었으며, 강풍 위험도 모델은 평가된 강풍 위험과 강풍 취약도의 수학적 계산을 통해서 평가되었다. 강풍 위험은 국내 내륙과 해안지역의 대도시인 서울과 부산 지역에 대하여 평가되었으며, 강풍 취약도 모델은 현장 조사와 문헌 조사를 통하여 파악된 10종의 벽면 이용형, 8종의 돌출형 옥외 광고물을 대상으로 개발되었다. 강풍 위험도에 영향을 미치는 요인을 파악하기 위하여 지표조도구분, 옥외 광고물의 형태, 설치 지역, 설치 높이 등에 따른 강풍 위험도를 정량적으로 평가하였다. 본 연구에서 제안한 강풍 위험도 평가 방법은 강풍으로 인한 옥외 광고물의 손실 추정 및 피해 저감 대책 수립을 위하여 활용될 수 있을 것으로 판단된다.

침몰선박은 침몰 당시뿐만 아니라 오랜 시간이 경과된 후에도 선체 내에 잔존하고 있는 연료유 등 유해물질의 지속적 혹은 일시적 유출로 2차 해양오염사고를 발생시킬 수 있다. 정부에서는 1999년부터 침몰선박에 대한 관리업무를 수행하고, 침몰선박의 잠재적 위해도를 정량적으로 평가할 수 있는 위해도 평가표를 개발하여 운영함으로써 침몰선박에 대한 국가적 관리체계를 구축하고 있다. 그러나 현재의 침몰선박의 위해도 평가는 침몰선박에 잔존하고 있는 연료유 등의 양에 의해 평가점수가 판이하게 달라짐에도 불구하고, 침몰선박 현황보고자료 중 상당수가 연료유 잔존량 항목이 누락되고 있는 실정이다. 이에 본 연구에서는 선박 연료유 잔존량에 대한 추정모델을 개발하여, 현행 침몰선박 위해도 평가에 적용함으로써 보다 정확한 평가를 수행할 수 있는 방안을 마련하였다.

본 연구에서는 강풍 위험과 강풍 취약도의 합성곱을 통하여 강풍 위험도를 평가할 수 있는 확률적 체계를 수립하였으며, 수치적으로 개발한 모형으로 아파트 창호 시스템의 강풍 위험도를 평가하였다. 강풍 위험 모형은 1951년부터 2013년까지에 한반도에 영향을 준 태풍의 기후학적 자료를 몬테카를로 모사기법에 적용하여 개발되었다. 또한 몬테카를로 모사기법으로 창호 시스템의 저항성능과 풍하중의 확률 분포를 비교하여 강풍에 대한 4가지 피해단계의 구조적 파괴확률을 평가할 수 있는 취약도 모형이 개발되었다. 개발된 몬테카를로 모사기법으로 평가한 강풍 위험과 강풍 취약도는 각각 웨이블 분포와 로그정규분포로 곡선맞춤 되었으며, 합성곱을 통한 강풍 위험도 평가에 사용되었다. 본 연구에서 개발한 확률적 위험도 평가체계를 통하여 평가지역, 지표조도, 지형, 지붕 경사각, 건물 높이 등이 아파트 창호 시스템의 강풍 위험도에 미치는 영향성을 정량적으로 평가할 수 있었다. 향후 본 연구를 통하여 개발된 강풍 위험도 평가 모델은 평가지역의 존재하는 건축물에 대한 데이터베이스와 결합하여 손실추정 및 피해 저감대책 수립 등의 분야에서 활용이 가능할 것으로 판단된다.

The major issue in aircraft industry is aviation safety management because of demand improvement and advancement of the aircraft. This study is to assess the risks for aviation safety management using IRPN( importance-risk priority number) which is added to importance coefficient from RPN(risk priority number). In FMEA, RPN requires the factors like the occurrence (O), Severity (S), and Detection (D) of each failure mode to be precisely evaluated. Therefore, the severity and detection is derived by the value from FMEA of expert group based on the Fuzzy theory. The occurrence is calculated from the accident statistics of IATA(international air transport association) database. Particularly, this study introduces importance coefficient to prevent from RPN distortions. It is also derived from FMEA based on the Fuzzy theory. Finally, the critical ranking of risk factors according to I-RPN is compared with the existing research.

The occupational health and safety accidents were continuously increased during handling, usage and manufacturing the chemical materials according to increase of small and medium sized enterprises in domestic industries. These accidents mainly resulted from insufficient occupational health and safety management and deteriorative facilities and focused on corresponding operation to minimize the damage of accidents after occurrence. But, it was required that we grasped the occurrence causes of occupational health and safety risk in handling, usage and manufacturing the chemical materials and develop the adequate corresponding operation and system according to the possible occurrence of occupational health and safety risk. This study deals with the development of risk assessment model to derive the risk and important risk of occupational health and safety and then help to construct the self-controlled occupational health and safety system for small and medium sized enterprises handling the chemical materials.

Constructions sites are affected by Diversity workplace, complexity of construction, Change of place, Mobility of workers and so on. In a single establishment, Prime contractors and subcontractors have to conduct their work at the same time. There are a lot of unpredictable risks when the construction is running, coordination between contractors is very important to do a risk assessment under the condition. Large Construction companies were investigated by previous studies. Survey research is applied to the risk assessment. In the writing, Risk assessment of the entire lower level. Because of the low level of risk factors to find. Also, There was a limit to investigate accidents. Confirmed that Effort to derive a risk factors were desperately of the risk assessment. Results were obtained through previous studies. The PCM is several experts should be joined. Experts Site Manager, Supervisor, Safety Manager, Director Contractor, Work team leader is required to participate. Construction plans, Process Planning to the risk find beforehand. And Determines how the operations and the control. Also, Made it into the database. and PCRA can be used in the risk assessment was developed.

Constructions sites are affected by Diversity workplace, complexity of construction, Change of place, Mobility of workers and so on. In a single establishment, Prime contractors and subcontractors have to conduct their work at the same time. There are a lot of unpredictable risks when the construction is running, coordination between contractors is very important to do a risk assessment under the condition. Large Construction companies were investigated by previous studies. Survey research is applied to the risk assessment. In the writing, Risk assessment of the entire lower level. Because of the low level of risk factors to find. Also, There was a limit to investigate accidents. Confirmed that Effort to derive a risk factors were desperately of the risk assessment. Results were obtained through previous studies. The PCM is several experts should be joined. Experts Site Manager, Supervisor, Safety Manager, Director Contractor, Work team leader is required to participate. Construction plans, Process Planning to the risk find beforehand. And Determines how the operations and the control. Also, Made it into the database. and PCRA can be used in the risk assessment was developed.

구제역 바이러스는 소나 돼지 등의 우제류 가축에 경구 또는 흡입 노출 등의 다양한 노출 경로를 통해 심각한 감염성을 유발하는 생물학적 유해인자로 국내 축산업 운영에 있어 막대한 경제적 손실을 초래하는 병원균들 중 하나다. 구제역 발병에 대한 사전적 예방 관리를 도모할 수 있는 조치 방안 중 하나는 공기를 통해 전파되는 구제역 바이러스 확산에 대해 수학적 모델 적용을 통해 예측된 분석 결과에 따라 설정될 수 있다. 대기 확산 모델들은 일반적으로 구제역 바이러스의 주요 전파 경로인 경구 및 접촉 감염의 노출 시나리오를 예측할 수는 없으나, 상대적으로 예측도가 높은 대기 확산 모델의 경우 공기 전파에 대한 구제역 바이러스의 위해성 관리 방안을 결정하는 데 주요 역할을 담당할 수 있는 유용가능한 수단으로 여러 나라에서 활용되어 왔다. 구제역 바이러스 전파를 억제하기 위한 엄격한 관리 방안 중 다량의 가축 살처분 방법은 축산 농가들에게 심각한 경제적 손실을 초래하여 심각한 경우 새로운 자립의 여건마저도 상실시킬 수도 있다. 반면 낮은 수준의 대응 방안은 향후 구제역 발생에 따른 추가적 피해를 근원적으로 억제할 수 없는 역학적 한계에 봉착할 수 있다. 본 연구는 구제역 바이러스의 기본 특성 및 발생 모델 적용에 따른 공기 중 전파의 감염 위험성 평가 관련 선행 문헌들을 고찰하였다. 또한 1970년대 이후 구제역 바이러스의 공기 전파 경로를 예측하기 위해 여러 나라에서 실제 활용된 다양한 대기 확산 모델들의 적용 사례 및 장/단점을 비교 분석하였다.

The objective of this study is to develop an evaluation model for the National highway risky areas. Thus, for the purposes of doing this, National highway risky area evaluated targeting to provide determination ranking and suggesting rival-superiority factors as well as under-inferiority factors in ten National highway risky areas. This study developed for modules of risky areas evaluation, using fuzzy set theory and analytic hierarchy process for evaluation model of National highway risky area in transport environment. The preceding studies assess risk analysis through analysis of causal relationships by National highway safety sector not only handles rating scale development suitable for assessment area by referring to accident frequency model but also geometric structures model. As result of this study, this model of Fuzzy Ahp Risk Analysis (FARA) apply for programmable design in real time processing through easily derive strategy for improvement activities to provide a decision-making effectively. Furthermore, this study contributes frame for improvements of National highway construction for renovation's priority strategy as well as future's policy schemes.

The risk assessment model is an important subsystem for effective establishment and operation of EMS (environment management system). In case of poor risk assessment long-term and large-scale failure expense might be brought. Managing policy, target and other indices based on risk assessment can guarantee successful EMS. In this paper, we aim at comparative analysis of various risk methods and propose an alternative risk assessment model for EMS.