샤피 V-노치 충격 하중-변위 곡선으로부터 얻은 균열정지하중을 이용하여 원자로압력용기강의 균열정지파괴인성(KIa)을 예측할 수 있는 방법을 모색하고 그 타당성을 고찰하였다. 샤피충격 하중-변위 곡선으로부터 얻은 균열정지하중값의 변화는 특성온도로 보정된 지수함수의 형태로 잘 표현될 수 있었다. 특성온도 TPa=2kN은 실험적인 무연성천이온도(TNDT) 및 T41 J과 높은 상관성을 나타냈으며, 원자로압력용기강의 균열정지파괴인성을 표현하는 새로운 특성온도로 사용할 수 있을 것으로 판단되었다. 또한 균열정지하중값의 변화는 파면으로부터 측정된 안정균열길이의 변화와 매우 높은 상관성을 나타내었다. 따라서 무딘 노치를 갖는 시편에 대한 계장화샤피충격시험을 통하여 균열정지하중 및 안정균열길이를 측정하믈써 비교적 정확하게 원자로압력용기강에 대한 하한값의 파괴인성치(KIa)를 평가하는 것이 가능한 것으로 판단되었다.

This study was evaluated dynamic impact tensile properties of 80 MPa sprayed HPFRCC by I-SEFIM test as a part of the research for development of sprayed HPFRCC for protection and blast resistant of existing structures.

This research developed the fiber pullout impact test machine to investigate interfacial bond strength between fiber and cement based matrix under high velocity. To achieve the goal, firstly the existing pullout test machines were investigated. And then, these drawback were comprehended. Finally, Fiber pullout impact test machine base on strain energy frame impact machine was proposed.

This study was evaluated dynamic impact fracture behaviour of 80 MPa sprayed HPFRCC by Gas-gun test as a part of the research for development of sprayed HPFRCC for protection and blast resistant of existing structures.

This study performed gas-gun propelled projectile impact tests with high strength steel fiber reinforced concrete. Also, from the impact tests, failure modes and protection performances of HIgh Performance Concrete which is reinforced by steel fibers were assessed. High strength steel fiber reinforced concrete showed excellent protection performances against impact loads.

In this study, preliminary analytical study on the middle scale impact test of SC(steel plate concrete) walls were carried out to evaluate the impact resistance performance of SC walls subjected to missile impact load. A total of 15 middle-scale impact tests will be carried out to investigate the impact behavior of SC walls. Pre-test impact analysis for all test cases were performed to decide the initial impact velocity. Calibrations of the analytical parameter were performed using preliminary test results.

This research developed the fiber pullout impact test machine to investigate interfacial bond strength between fiber and cement based matrix under high velocity. To achieve the goal, firstly the existing pullout test machines were investigated. And then, these drawback were comprehended. Finally, Fiber pullout impact test machine base on strain energy frame impact machine was proposed.

This study was evaluated dynamic impact fracture behaviour of 80 MPa sprayed HPFRCC by Gas-gun test as a part of the research for development of sprayed HPFRCC for protection and blast resistant of existing structures.

The purpose of this study is to evaluate propriety of impact factor in railway design code about truss bridge with dynamic loading test. This study also analyzes and compares impact factor and railway design code. A impact factor of all members of the truss is lowered by revising railway design code in 2013. The result of this study indicates that a reasonable standard for impact factor is required, because current impact factor which is specified in railway design code could not properly reflect dynamic response of specific type and member.

This paper reports the development of upgraded strain energy frame impact machine (SEFIM) with larger and faster impact capacity. The impact load capacity of SEFIM was improved by applying a 200 tonf hydraulic jack while the impact velocity was significantly increased by reducing the diameter of energy frame and by applying different materials in the energy frame. In addition, the length of transmitter bar was increased to capture pure material response by avoiding the influence of reflected stress wave in the transmitter bar. Experimental test results showed the faster strain rate (186 /sec) than that (10-40 /sec) of previous SEFIM.

The field application of air-coupled impact echo (IE) is evaluated in this study, where an actual in-service concrete bridge deck is tested. An IE test equipment set is deployed as part of an effort to develop new rapid measurement method. The IE data are presented as two-dimensional frequency maps. For verification of the location of shallow delamination damage, eight drilled core samples were extracted from the test area. The results show reasonably good agreement with the drilled cores.

The impact factor of general road bridges is typically calculated according to Korea Highway Design Code(KHDC) or Design Guidelines For Cable-Supported Bridges in Korea. Above design codes define the impact factor as the function of span length or effective span length. But calculated impadt factors from this function are different to the measured values of long-span bridges such as cable-stayed bridge, suspension bridge. There are several methods to estimate the impact factor of cable supported bridges. In this study, the impact factor of cable-stayed bridges is estimated from dynamic load tests and compared to calculated values from the various design codes.