PURPOSES : This study is aimed to economic analysis of the ferronickel slag pavement method carried out to suggest the necessity of developing ferronickel slag pavement technology. METHODS : A life cycle cost analysis of the application of the Ferronickel Slag pavement method and the cutting + overlay pavement method was performed to compare the economic indicators and greenhouse gas emissions for each pavement method. RESULTS : As a result of the analysis, regardless of the Ferronickel Slag mixing rate, if the common performance of the Ferronickel Slag pavement method is the same or superior to the existing pavement method, it is more economical than the existing pavement method. Furthermore, the lower the maintenance cost of the Ferronickel Slag pavement method, the higher the economic feasibility due to the high Ferronickel Slag mixing rate. Greenhouse gas emissions can be reduced from at least 9% to up to 53% through the application of the Ferronickel Slag pavement method, except for some scenario analysis results. CONCLUSIONS : This study provided that the Ferronickel Slag pavement method was superior to the existing pavement method in terms of economic and environmental aspects. Therefore, it was found that the objective justification of developing road pavement technology using Ferronickel Slag was secured.
PURPOSES : So far, aged cement concrete pavement on express highways has been rehabilitated mainly with asphalt concrete inlay. However, potholes were the major problem, and they shortened the life of the inlay mainly owing to the poor drainage of water once it infiltrated the interface of the concrete and asphalt. The purpose of this study is to compare the performance and economic efficiency of asphalt overlay and inlayMETHODS: Overlay and inlay were compared through accelerated pavement testing, and a life-cycle cost analysis was conducted in this study using the CA4PRS program.RESULTS and CONCLUSIONS : It was found from accelerated pavement testing that the overlay exhibited reflective crack resistance that was more than twice as effective as that of inlay. The total cost (construction cost + user cost) within the analysis period (20 years) of the overlay was 37% lower than that of the inlay.
PURPOSES: Concrete pavement has been used in the construction of the Jungbu expressway in 1987. More than 60% of the pavement on the expressway is currently made of concrete, but most has been used far beyond their design life. Pavement life has been extended through routine maintenance or overlay. However, the structural capacity of the pavement has reached its limit, and extensive rehabilitation/reconstruction with long time traffic blocking should be considered. The three following issues on concrete rehabilitation/reconstruction will be discussed: (1) economic comparison of asphalt inlay and asphalt overlay, (2) economic comparison preventive overlay on a section which is currently good and routine overlay on the section which will be poor, and (3) economic analysis of early-strength concrete when it is used in concrete reconstruction. METHODS: First, various life cycle cost analysis tools were compared, and the proper tool for the extensive rehabilitation/reconstruction was selected. Second, a sensitivity analysis of the selected tool was performed to find the influential input variables, which should be carefully selected in the analysis. Third, three case studies, which can be issues in the rehabilitation/reconstruction of the expressway concrete pavement in Korea, were performed. RESULTS: Asphalt overlay without milling the deteriorated concrete showed 18~25% lower life cycle cost than the current asphalt inlay with milling. The good current preventive overlay on the section was economically justified within the scope of this study. The construction cost limit of the early strength concrete was suggested to be economical for 1, 3, and 7 days of construction alternative opening. CONCLUSIONS: CA4PRS was a viable tool for comparing various rehabilitation/reconstruction issue alternatives. Several concrete issues associated with the rehabilitation/reconstruction of the deteriorated concrete pavement were discussed as mentioned above.
PURPOSES : The authors set out to estimate the related carbon emissions, energy use, and costs of the national freeways and highways in Korea. To achieve this goal, a macro-level methodology for estimating those amounts by road type, road structure type, and road life cycle was developed.
METHODS : The carbon emissions, energy use, and costs associated with roads vary according to the road type, road structure type, and road life cycle. Therefore, in this study, the road type, road structure type, and road life cycle were classified into two or three categories based on criteria determined by the authors. The unit amounts of carbon emissions and energy use per unit road length by classification were estimated using data gathered from actual road samples. The unit amounts of cost per unit road length by classification were acquired from the standard cost values provided in the 2013 road business manual. The total carbon emissions, energy use, and cost of the national freeways and highways were calculated by multiplying the road length by the corresponding unit amounts.
RESULTS: The total carbon emissions, energy use, and costs associated with the national freeways and highways in Korea were estimated by applying the estimated unit amounts and the developed method.
CONCLUSIONS: The developed method can be employed in the road planning and design stage when decision makers need to consider the impact of road construction from an environmental and economic point of view.
This study was carried out to evaluate the Life Cycle Cost(LCC) of four types of BIPV(Building Integrated Photovoltaic) systems -Glass plus Granite, Crystalline BIPV, Crystalline BIPV + Glass plus Granite and See through Amorphous BIPV -which were vertically installed to generate the same capacity(2kW) and the same area. Initial investment costs, cost savings and maintenance costs had been predicted during the period of analysing the LCC of four types of BIPV(Building Integrated Photovoltaic) systems installed for the purpose of evaluating the LCC. In case of cost savings, it had been analyzed by measuring the amount of electric power generated, reduction in lighting load and heat & cooling loads through simulation. From this analysis, it was predicted that the See-through amorphous BIPV offering cost saving advantages demonstrated the economical efficiency similar to the Glass plus Granite when it is backed by more than 20 years of durability.
The purpose of this study was to determine the effect of expansion joint spacing (slab size) on the life cycle costs of owning Portland Cement Concrete (PCC) airfield pavements. Previous research has shown that slab size has a statistically significant impact on pavement performance. A probabilistic life cycle cost analysis was performed to determine if the effect of slab size on pavement performance would affect the total cost of ownership of PCC pavements. Data from 48 Pavement Condition Index (PCI) inspections of military and civilian airfields were used to develop probability-of-distress-by-condition curves, which were then used to develop probabilistic cost-of-repair-by-condition curves. A present worth life cycle cost analysis was then performed for various slab sizes, using construction costs, rehabilitation costs, and maintenance costs. Maintenance costs were determined by assuming a condition deterioration rate appropriate for each slab size and applying the cost-by-condition curves. The probabilistic cost-of-repair-by-condition curves indicated that smaller slabs are more expensive to repair on a unit cost basis. Life cycle cost analysis showed that larger slabs have a higher total cost of ownership than smaller slabs due to a faster rate of deterioration.
본 논문에서는 강박스 거더의 생애주기비용을 최소화하기 위한 방법을 제시하였다. 본 논문에서 고려된 강박스 거더의 생애주기비용은 초기비용, 유지관리비용 및 보수비용으로 구성되었다. 강재 주형의 상태등급곡선과 안전진단 결과 측정된 내하력을 바탕으로 내하력곡선을 추정하였으며, 이 곡선을 이용하여 생애주비용을 고려한 강박스 거더의 최적설계를 수행하였다. 또한 내하력곡선을 통해 강박스 거더의 공용수명과 보수 보강 시기 및 횟수를 결정하고 초기 내하력에 따른 생애주기 동안 발생하는 연간비용을 비교, 분석하였다. 본 논문에서 제안한 생애주기비용을 고려한 강박스 거더의 최적설계를 통하여 기존의 설계에 비해 보다 경제적이며 안전한 설계를 유도할 수 있으리라 판단된다.
Parametric life-cycle cost(LCC) models have been integrated with traditional design tools, and used in prior work to demonstrate the rapid solution of holistic, analytical tradeoffs between detailed design variations. During early designs stages there may be competing concepts with dramatic differences. Additionally, detailed information is scarce, and decisions must be models. for a diverse range of concepts, and the lack of detailed information make the integration make the integration of traditional LCC models impractical. This paper explores an approximate method for providing preliminary life-cycle cost. Learning algorithms trained using the known characteristics of existing products be approximated quickly during conceptual design without the overhead of defining new models. Artificial neural networks are trained to generalize on product attributes and life cycle cost date from pre-existing LCC studies. The Product attribute data to quickly obtain and LCC for a new and then an application is provided. In additions, the statistical method, called regression analysis, is suggested to predict the LCC. Tests have shown it is possible to predict the life cycle cost, and the comparison results between a learning LCC model and a regression analysis is also shown
점탄성감쇠기가 설치된 구조물의 통합최적설계기법 및 비용효율성 평가기법을 제시하였다. 구조부재와 점탄성감쇠기의 사용량을 설계변수로 하여, 생애주기비용을 최소화하도록 최적화문제를 정식화하였으며, 유전자알고리즘을 적용하여 최적의 설계변수를 검색하였다. 수치예제에 대한 통합최적설계 수행 결과를 통해 지반운동 특성에 따른 점탄성감쇠기의 최적배치 및 각 층 강성의 최적분포 경향을 분석하였으며, 점탄성감쇠기가 설치되지 않은 구조시스템과의 생애주기비용 비교를 통하여 비용효율성을 평가하였다. 점탄성감쇠기는 특히 중약진지역에서 높은 비용효율성을 보이는 것으로 나타났다.
본 논문에서는 강상자형교의 바닥판과 주형에 대한 생애주기비용(Life-Cycle Cost : LCC)를 고려한 최적설계 방법을 제안하였다. 생애주기비용의 최적설계 문제는 초기비용, 유지관리비용 그리고 강도와 처짐 그리고 균열에 대한 파손 기대비용의 최소화 문제로 정식화할 수 있다. 기존의 재래적인 설계방법과의 비교를 동해서 강상자형교의 생애주기비용 최적설계의 우수성을 입증하였다. 또한 수치적인 결과의 고찰을 통하여 LCC에 근거한 최적설계가 여타의 설계방법들보다 좀 더 합리적이고 경제적이며 안전한 설계를 유도하는 것으로 분석되었다.
본 논문은 교량의 예방적 유지관리 효과를 생애주기비용 절감 측면에서 분석 하였다. 예방적 유지관리는 현재 실시되고 있는 대응 적 유지관리 전략과 대비 되는 유지관리 전략으로 교량의 열화지연을 통해 궁극적으로는 교량의 사용수명을 연장 시키며 생애주기비용을 절 감시키는 유지관리 전략이다. 이러한 예방적 유지관리 효과를 분석하기 위해 교량의 공용연수에 따른 건전도 점수 변화 모델과 FHWA 자료를 바탕으로 한 국내 고속도로 교량의 건전도 점수에 따른 보수·보강 비용 모델을 제시 하였다. 제시한 복수의 모델과 국내외 참고 문헌을 바탕으 로 제안된 예방적 유지관리 항목(청소와 도장)의 비용과 주기를 활용하여 사용수명 100년까지의 표준교량(1,730 m2/교량) 당 생애주기 비용과 향후 20년간의 고속도로 총 유지관리 비용을 산정 하였다. 분석 결과 100년간 예방적 유지관리 활동으로 인해 교량 당 5억원의 절감효과를 볼 수 있으며 현재 예방적 유지관리 활동을 실시할 경우 20년 후(2035년)에는 총 1,837억원, 즉 연간 약 92억원의 비용 절감효과를 볼 수 있는 것으 로 분석 되었다.
산업의 발달 및 도시화에 따라 도시에 인구밀도가 높아지고 교통수단이 증가됨에 따라 도로 교통 소음과 관련된 피해가 해마다 급증하고 있는 추세이다. 최근에는 도로와 인접한 인구 밀집 지역인 주거지역, 학교, 병원 등에서 각종 소음에 대한 문제가 지속적으로 발생되고 있는 것으로 조사되었으며 환경분쟁위원회의 발표에 따르면 2014년까지의 환경분쟁 중 약 80%가 소음관련 문제로 해결책이 시급함을 알 수 있다. 본 연구는 복층 저소음 아스팔트 콘크리트 포장의 소음 저감효과 및 경제성에 관한 포스터이다. 본 연구에서는 콘크리트 포장의 시공 전, 후의 5분 등가소음도 측정을 실시하여 일반 밀입도 아스팔트 콘크리트 포장을 시공하였을 때와 복층 저소음 아스팔트를 시공하였을 때의 도로교통 소음 저감량을 비교하였다. 측정된 5분 등가 소음은 소음 예측 프로그램의 변수로 사용하여 복층 저소음 아스팔트 콘크리트 포장을 실시한 지역의 아파트의 15층 전체에 대한 도로교통 소음을 예측 하여 경제성 분석의 기초자료로 사용하였다. 소음 예측 결과를 바탕으로 소음 편익 비용을 산정하였으며 복층 저소음 아스팔트 콘크리트 포장과 일반 밀입도 아스팔트 콘크리트 포장의 생애주기 비용을 비교 분석하였다.
This study is necessity for waterproofing construction using a Life Cycle Cost(LCC). On the purpose of expanding the technology to build and optimize leakage prevention design reasonable selection of center performance evaluation system and possible economic evaluation system.
In this study, a bridge maintenance system is developed to generate performance based maintenance strategy by considering the life cycle cost(LCC). And it is proposed that the concept of generally annual maintenance are practically and easily used to perform LCC analysis. Some of generally annual maintenance data are suggested through existing data analysis due to the proposed concept and LCC analysis of by a real bridge structures is preformed by comparison with a current approach. This paper presents the development of bridge maintenance strategy and can be utilized as an efficient tool to provide the best economical bridge maintenance scenario corresponding to the various constraints and requirements of bridge agency.
This study mainly focuses on presenting a rational procedure of assessing target reliability level of nuclear containment. The target reliability level can be obtained by considering LCC(Life Cycle Cost) of damage and operation. The LCC evaluation results in the different environmental situations. It is verified that this deviation of LCC can be adjusted by selecting the proper initial target reliability. In addition, slight increase of initial target reliability for the nuclear containment aiming a longer service life, therefore, the total expected loss during the extended service years can be maintained in the same level as the total loss expected in the 20-year service life for the existing containment structures.
This paper presents the results of a life-cycle cost (LCC) analysis to select an efficient maintenance action for a deteriorated waterfront structure. Three different maintenance actions, a routine maintenance and two types of rehabilitation methods, were assumed and the corresponding the LCCs were calculated using a LC activity profile. The results of the analysis indicate that the LCC analysis can be effectively used to examine the maintenance alternative actions during the decision making process.
신뢰성평가는 고속철도교량에 포함된 불확실성의 영향을 고려하여 정량적 구조안전성을 검토하기 위한 효율적인 방안이며, 신뢰성평가에 기초한 기대생애주기비용은 고속철도교량의 합리적인 안전수준 및 설계기준을 제공할 것이다. 따라서 이 연구에서는 수치해석과 신뢰성평가 결과를 바탕으로 고속철도교량의 기대생애주기비용 및 최적설계 방안을 결정하고자 한다. 이를 위해, 고속철도교량의 표준설계를 기준으로 다양한 설계방안을 설정한 후, 각각의 설계방안에 대해 수치해석을 수행하였으며, 설계강도 한계상태방정식에 따른 신뢰성평가는 수치해석결과를 토대로 외적 불확실성의 영향을 고려하여 수행하였다. 고속철도교량의 기대생애주기비용은 각각의 설계방안에 따른 신뢰성평가 결과를 바탕으로 산정하였다. 또한 최적설계 방안은 산정된 기대생애주기비용을 이용하여 결정하였다. 아울러, 최적설계 방안의 신뢰성평가 결과 및 기대생애주기비용에 대해 내적 불확실성의 영향을 고려하여 검토하였다. 이 연구결과는 고속철도교량의 체계적인 안전성 평가 및 최적 구조설계를 위한 기초자료로 활용될 것으로 기대된다.