When confronted with the host states’ increasing enthusiasm of invoking the corruption defense as an arbitral strategy to frustrate foreign investors’ claims, the International Centre for Settlement of Investment Disputes (ICSID) tribunals encounter realistic difficulties in arbitration. The inherent insufficiency of anti-corruption investigative powers bestowed to ICSID tribunals highlights the importance of constructing a coordinative mechanism between the ICSID and any domestic enforcement authorities enlisted to repudiate corruption. The enacted International Criminal Judicial Assistance Law of the People’s Republic of China provides the domestic legal basis for establishing a coordinative international criminal judicial assistance mechanism between such international organizations as ICSID and China’s domestic anti-corruption enforcement authorities. Eventually, the proposed ICSID-China’s anti-corruption mechanism will help the global community fight against international investment corruption in a coordinated way, substantially enhancing any host state’s ability to confront the on-going difficulties also experienced by investment arbitral tribunals.

Most commercial buildings among existing RC buildings in Korea have a multi-story wall-frame structure where RC shear wall is commonly used as its core at stairways or elevators. The members of the existing middle and low-rise wall-frame buildings are likely arranged in ordinary details considering building occupancy, and the importance and difficulty of member design. This is because there are few limitations, considerations, and financial burdens on the code for designing members with ordinary details. Compared with the intermediate or unique details, the ductility and overstrength are insufficient. Furthermore, the behavior of the member can be shear-dominated. Since shear failure in vertical members can cause a collapse of the entire structure, nonlinear characteristics such as shear strength and stiffness deterioration should be adequately reflected in the analysis model. With this background, an 8-story RC wall-frame building was designed as a building frame system with ordinary shear walls, and the effect of reflecting the shear failure mode of columns and walls on the collapse mechanism was investigated. As a result, the shear failure mode effect on the collapse mechanism was evident in walls, not columns. Consequently, it is recommended that the shear behavior characteristics of walls are explicitly considered in the analysis of wall-frame buildings with ordinary details.

ATP-binding cassette (ABC) transporter는 다양한 기질을 세포 밖과 세포 안으로 수송하는 대표적인 수송단백질이다. 곤충에서 ABC transporter는 살충제에 대한 저항성을 발달시키는 중요한 역할을 한다. 현재까지 모델곤충인 초파리를 대상으로 ABC transporter의 살충제 교차저항성에 관한 연구는 많이 수행되어오지 않았다. 본 연구에서는 ABC transporter에 속하는 Mdr49A 유전자가 여섯 종류의 살충제에 보이는 교차저항성 기작을 형질전환 초파리를 이용하여 구명하였다. 초파리 91-R과 91-C 계통은 공통된 조상으로부터 유래되었으며 91-R은 60년 이상 DDT에 노출되었지만 91-C는 어떠한 살충제에도 노출되지 않고 유지되어 왔다. 91-R 계통의 MDR49A 단백질에서 유래된 3개의 아미노산 돌연변이를 형질전환 초파리에 과발현 시켰을 때 carbofuran에 대해서 2.0~6.7배 그리고 permethrin에 대해서 2.5~10.5배의 교차저항성을 나타 낸 반면 다른 약제, abamectin, imidacloprid, methoxychlor, prothiofos에 대해서는 어떠한 교차저항성도 나타내지 않았다. 이상의 결과는 Mdr49A 유전자의 과발현과 더불어 3개의 아미노산 돌연변이는 두 개 약제, carbofuran과 permethrin에 대해 교차저항성 기능을 한다고 제시하고 있다

We investigate the plausibility of mass return, from stellar mass loss processes within the central ~100 pc region of the Milky Way (the inner nuclear bulge), as a mass supply mechanism for the Circumnuclear Disk (CND). Gas in the Galactic disk migrates inward to the Galactic centre due to the asymmetric potential caused by the Galactic bar. The inward migration of gas stops and accumulates to form the central molecular zone (CMZ), at 100{200 pc from the Galactic center. It is commonly assumed that stars have formed in the CMZ throughout the lifetime of the Galaxy and have diffused inward to form a 'r-2 stellar cusp' within the inner nuclear bulge. We propose that the stars migrating inward from the CMZ supply gas to the inner nuclear bulge via stellar mass loss, resulting in the formation of a gas disk along the Galactic plane and subsequent inward migration down to the central 10 pc region (CND). We simulate the evolution of a gas distribution that initially follows the stellar distribution of the aforementioned stellar cusp, and illustrate the potential gas supply toward the CND.

본고에서는 주관성을 기저로 ‘一会儿’과 ‘不一会儿’ 구문의 생성조건을 분석하여 두 구문의 차이를 살펴보았는데, ‘一会儿’은 객관량과 주관대량 및 주관소량을 나타내고, ‘不一会儿’은 주관소량만을 나타내며 주관성이 더 강조된다. 그 중 ‘不’는 주관정태표 지사로 작용할 뿐만 아니라 두 구문 사이에 양의 등급성을 구현한다. 나아가 ‘不一会 儿’ 구문의 주관성 획득 과정 및 부정표지사가 여전히 구문에 존재하는 내부 원인을 분석해 보았다. ‘(不)一会儿’ 구문은 전체는 부분을 우선한다는 인지적 현저성을 근거 로 잉여부정구문으로 부호화된 구문 전체를 우선 지각한 다음 구성소로서 부정표지 사의 정보를 지각하고 선택 배치한다. 이때 구문 내 부정표지사 ‘不’의 주관성이 강 요되며, ‘不’는 주관소량의 표지사로서 구문의 표의에는 어떠한 변화도 생기지 않은 채 문장의 표면에 명시되어 화자의 강한 주관정태를 전달함을 알 수 있었다.

The social media influencer (SMI) phenomenon is attracting attention from academia and business. A SMI refers to an individual who has accumulated a sizable social network of followers and thereby has influence over others (Ki et al., 2020). Due to the influence SMIs possess, an increasing number of brands are approaching SMIs and asking them to create and share branded content that includes product placements or brand recommendations. This practice is commonly referred to as influencer marketing. Reflecting the trend of influencer marketing, this study investigated: (1) whether consumers are ‘inspired-by’ SMIs and ‘inspired-to’ adopt the exemplars of SMIs (e.g., SMIs’ lifestyles, styles, and recommendations) as their social defaults that provide desirable standards that consumers will like and follow, and if so, (2) what are its causal factors and effects, and (3) whether the inspiration mechanism between SMIs and consumers differs between male and female consumers. In so doing, we drew on social defaults theory (Huh et al., 2014) and customer inspiration theory (Böttger et al., 2017).

Based on the Anthropomorphism theory and the Computers Are Social Actors paradigm, this research adopts questionnaire method and explores the relationship between robot anthropomorphism, social presence, social cognition and consumer’ continued using intention. In addition, we select technology anxiety as the moderator to explore its boundary effect

For form stability of membrane structures, membrane material is required to be in tension. Therefore, in planning and maintenance management, the engineer should consider enough about introduction of stress during construction and re-introduction of stress after completion. Clamping part is an important portion with the function for introducing tension into membrane materials, and the function to transmit stress to boundary structures, such as steel frames. Then, the purpose of this research is to clarify stress condition and stress transfer mechanism including clamping part of membrane structures, and to grasp the changing tendency of membrane structures with the passage of time. In this research, following previous one, we perform well-balanced evaluation by conducting tensile fractured tests of clamping part's specimens, and by measuring individually the amount of displacement of not only overall specimen's length but membrane material and clamping part. Thereby, we consider the influence the difference in the hardness of edge rope and the difference in the direction of thread affect modification and fracture load.

This short review focuses on fouling by proteins and macromolecules in microfiltration/ultrafiltration. First, an experimental system that enables investigation of how the extent of the adsorption of proteins and macromolecules on membrane surfaces contributes to a decrease in filtrate flux in microfiltration/ultrafiltration is described. Using this system, a causal relationship - not a correlation - indicating that adsorption results in a decrease in filtrate flux could be clearly demonstrated in some cases. Second, a hydration structure at the membrane surface that can suppress adsorption is discussed, inspired by biomaterial research. In their hydrated states, polymers with low-fouling properties have water molecules with a particular structure. Finally, some successful examples of the development of low-fouling membranes via surface modification using low-fouling polymers are discussed.

This paper aims to experimentally and numerically explore fracture mechanism characteristics of ultra-thin chopped carbon fiber tape-reinforced thermoplastics (UT-CTT) hat-shaped hollow beam under transverse static and impact loadings. Three distinct failure modes were observed in the impact bending tests, whereas only one similar progressive collapse mode was observed in the transverse bending tests. The numerical model was to incorporate some hypothetical inter-layers in UT-CTT and assign them with the failure model as cohesive zone model, which can perform non-linear characteristics with failure criterion for representing delamination failure. The dynamic material parameters for the impact model were theoretically predicted with consideration of strain-rate dependency. It shows that the proposed modeling approach for interacting damage modes can serve as a benchmark for modeling damage coupling in composite materials.

Cu/PET composite films are widely used in a variety of wearable electronics. Lifetime of the electronics is determined by adhesion between the Cu film and the PET substrate. The formation of an anisotropic nanostructure on the PET surface by surface modification can enhance Cu/PET interfacial adhesion. The shape and size of the anisotropic nanostructures of the PET surface can be controlled by varying the surface modification conditions. In this work, the effect of Cu/PET interface nanostructures on the failure mechanism of a Cu/PET flexible composite film is studied. From observation of the morphologies of the anisotropic nanostructures on plasma-treated PET surfaces, and cross-sections and surfaces of the fractured specimens, the Cu/PET interface area and nanostructure width are analyzed and the failure mechanism of the Cu/PET film is investigated. It is found that the failure mechanism of the Cu/PET flexible composite film depends on the shape and size of the plasmatreated PET surface nanostructures. Cu/PET interface nanostructures with maximal peel strength exhibit multiple craze-crack propagation behavior, while smaller or larger interface nanostructures exhibit single-path craze-crack propagation behavior.

Engine components subjected to cyclic thermal and mechanical loads may experience low-cycle or high-cycle fatigue failures. In particular, both of these failures can easily occur in aluminum cylinder heads, which are exposed to high temperatures and combustion pressures. Predicting the fatigue characteristics of the cylinder head are very important in the design stage of engine development. In this study, a finite element analysis was performed to predict the low-cycle thermal fatigue around exhaust ports of the cylinder head. Temperature distributions are obtained through the heat transfer analysis considering thermal cyclic test. The analysis result involves large plastic deformations, indicating compressive stresses at high temperatures and subsequently turn into tensile stresses at cold conditions. And the results showed that the critical regions such as exhaust port with large plastic strains coincided well with crack locations from thermal cyclic test. Next, design changes were made to the critical areas of the exhaust ports, and the results showed that the durability was improved by about 60% over the initial model and there were no problems in the thermal fatigue test.

Currently many companies are interested in reduction of the carbon emissions associated with their supply chain activities such as transportation and operations. Operational decisions, such as modifications in order quantities could an effective way in reducing carbon emissions in the supply chain. Cap-and-trade regulation, sometimes called emissions trading, is a market-based tool to limit greenhouse gas emissions. Under cap-and-trade regulation, emission credits are allocated to the firms and the firms trades emissions under cap-and-trade schemes. In this paper, we propose a single-manufacturer single-buyer two-echelon supply chain problem under the cap-and-trade mechanism incorporating the carbon emissions caused by transportation and warehousing activities where a single manufacturer produces a family of items in order to deliver a family of items to a single buyer at a fixed interval of time for effective implementation of Just-In-Time (JIT) Purchasing. An integrated multi-product lot-splitting model of facilitating multiple shipments in small lots between buyer and manufacturer is developed in a JIT Purchasing environment. Also, an iterative heuristic algorithm is developed to derive the common order interval, the number of intervals for each product and the number of shipments between the buyer and the manufacturer during the common interval. A numerical example is given to illustrate the savings in reduction of total cost and carbon emissions by the inventory model incorporating cap-and-trade mechanism compared to the classical inventory model. The proposed inventory model could be useful for the practical solution of two-echelon supply chain inventory problem under cap-and-trade mechanism.

고지방식이에 의해 유도한 비만모델동물에서 지장김치의 혈액 중 유해 지질 감소, 항비만 효능 및 그 작용 메카니즘을 조사하였다. 4개의 처리구는 CD(일반식이를 섭취한 정상 대조구, chow diet as normal control), HFD(고지방식이를 섭취한 비만 대조구, high fat diet as obesity), HFDCK(고지방식이+일반김치 추출물 투여구), HFDJK(고지방식이+지장김치 추출물 투여구)로 구분하여 김치추출물을 28일 동안 경구투여 하였다. 체중, 간 및 지방조직 무게는 비만모델동물에서 HFDJK가 HFDCK에 비해서 낮았다(p<0.05). 혈액 중성지방, 총콜레스테롤, LDL-C, 혈당은 HFD와 비교할 때 CD, HFDJK, HFDCK의 순서대로 낮았으며 HFDJK는 HFDCK에 비해 낮았다(p<0.05). 간 및 지방세포의 크기는 HFD, HFDCK, HFDJK의 순서대로 증가하였으며 HFDJK는 HFDCK에 비해서 크게 낮았다(p<0.05). 결과는 비만모델동물에서 지장김치의 섭취가 일반김치에 비해서 혈액 지질과 혈당을 낮추고 지방세포의 크기를 줄여줌으로써 항비만 효능을 갖는다는 점을 나타낸다.

Titanium dioxide (TiO2) is a typical inorganic material that has an excellent photocatalytic property and a high refractive index. It is used in water/air purifiers, solar cells, white pigments, refractory materials, semiconductors, etc.; its demand is continuously increasing. In this study, anatase and rutile phase titanium dioxide is prepared using hydroxyl and carboxyl; the titanium complex and its mechanism are investigated. As a result of analyzing the phase transition characteristics by a heat treatment temperature using a titanium complex having a hydroxyl group and a carboxyl group, it is confirmed that the material properties were different from each other and that the anatase and rutile phase contents can be controlled. The titanium complexes prepared in this study show different characteristics from the titania-formation temperatures of the known anatase and rutile phases. It is inferred that this is due to the change of electrostatic adsorption behavior due to the complexing function of the oxygen sharing point, which crystals of the TiO6 structure share.