of the marketed multi-later insulating curtain was carried out. Experiments is conducted by fabricating a test apparatus for investigating the heat flux characteristics. The multi-later insulating curtain used for the experiment was compared using the P, N, S, U and T company, which are commercially available, and the heat flux due to temperature difference between the experimental apparatus and the outside was compared and analyzed. When the internal temperature of the experimental result is the maximum temperature 60℃, the heat flux of multi-later insulating curtain is T Co.(73.1W/m2) > S Co.(119.5W/m2) > U Co.(155W/m2) > N Co.(163.1 W/m2) > P Co.(177.7W/m2). The heat flux means the quantity of heat passing through the unit time per unit area, and the higher the numerical value, the higher the quantity of heat passing through the multi-layer insulating curtain. This can be determined that high heat fluxes produce low heat resistance. Further, it has been found that the weight of the insulating curtain is largely unrelated to the heat insulating property, and the heat insulating curtain having a thickness containing a high internal air layer is excellent in the heat insulating property. In the future when manufacturing a heat insulating curtain, It is judged that it is desirable to manufacture a combination of heat insulating materials that contain a high internal air layer content and that can maintain the air layer even for long-term use while minimizing the volume.

Multiple galvanized steel and aluminium alloy sheets were joined by self-piercing rivet(SPR) and hybrid joining(SPR + adhesive bonding). In this study, tensile-shear load and fatigue properties of multi-layer SPR and hybrid joints were investigated. Moreover, tensile-shear deformation behavior of the joints under different specimen configurations was investigated. Depending on the specimen configurations either top sheet tearing failure mode or rivet tail pull-out failure mode was observed during the tensile-shear tests. The top sheet tearing failure mode resulted in low maximum tensile-shear load, but it led to larger displacement value as compared to that in the tail pull-out failure mode. Maximum tensile-shear load of hybrid joints was about four times higher than that of SPR joints. Also, fatigue limit of hybrid joints was about two times higher than that of SPR joints.

본 실험은 벼 육묘장의 연중 활용을 위해 다단 재배상에서 벼 육묘판을 이용한 어린잎 채소의 적정 수확시기를 구명하고자 다단재배에서 단 위치 및 재배 일수가 생육과 품질에 미치는 영향을 알아보고자 실시되었다. 공시 작물은 배초향(Agastsche rugosa O.)과 큰다닥냉이 (Lepidium sativum L.)를 사용하였고, 코코넛코이어로 충진한 벼 육묘판에 각각의 작물을 10일 육묘한 어린잎 채소를 6단 재배상(120×45×180cm)의 1층 저단(지면으로 부터 20cm)과 6층의 고단(지면으로부터 170cm)에 배치하였다. 공급액은 EC 1.5 dS·m-1의 배양액과 지하수를 하루간격으로 번갈아 각각 격일로 공급하였고, 하루 3회, 회당 200~400ml/tray씩 두상관수하였다. 7일 또는 14일 간 재배하여 수확한 후 생육 및 항산화 함량을 분석하였다. 저단처리와 고단처리에서의 재배 기간 중 일평균 누적광량 및 온도는 5.1~6.2MJ·m-2, 26.5~26.6oC과 9.3~9.6MJ·m-2, 27.5oC로 계측되었다. 배초향의 생육(초장, 엽장, 엽폭, 엽수, 생체중)은 저단에서 14일 재배되었을 때 높았고, 고단에서 재배된 배초향의 초장은 짧고, 엽 수가 감소하였다. 큰다닥냉이의 초장, 엽폭, 엽수, 생체 중은 저단에서 14일 재배되었을 때 유의적으로 높았으며, 재배일수가 길어졌을 때 엽장, 엽폭, 엽수는 차이가 없었다. 배초향의 수량은 적산온도와 누적광량이 증가함에 따라 증가하였다. 큰다닥냉이의 수량은 적산 온도 증가시 증가한 반면, 누적광량에서는 감소하여 작물간 누적광량에 따른 수량에 차이를 보였다. 배초향의 폴리페놀 및 안토시아닌 함량은 고단에서 높았으며, 재배일수가 길어졌을 때 폴리페놀, 안토시아닌 및 플라보노이드 함량은 증가하였다. 큰다닥냉이의 폴리페놀 함량은 고단 처리에서 높았고, 안토시아닌 및 플라보노이드 함량은 다단 위치와 재배일수에 따른 차이가 없었다. 한편 두 작물의 총엽록소 함량은 저단에서 7일 재배하였을 때 가장 높았다. 따라서 고온기 다단 재배 시 생육과 품질을 고려한 어린잎 채소 재배시 육묘 후 배초향은 고단에서 14일, 큰다닥냉이는 저단에서 7일 재배하여 수확하는 것이 좋으리라 판단한다.

This study evaluated Jichang Garden in China, which features various visual arrangements for landscape experiences. The purpose of the study was to understand concrete landscape arrangement methods and structure and to analyze the landscape experience therein. The results indicated the following elements. Water spaces in Jichang Garden created synesthetic multi-layers constructed by the sounds of the Eight-pitch stream. A multi-layer landscape structure was created through symmetrical and borrowed landscapes displayed in the buildings centering on the pond. The pot-planting landscape reveals axial and complementing landscapes that extract and separate aesthetic objects from plain walls and distracting surroundings to evoke the profound beauty of mountains and waters. By creating walkways and frameworks, the corridors serve as dividing landscapes that create a sense of direction and dynamics and divide landscapes. The moon gate and openwork windows create visual frameworks, while the overlapping of the framed and window landscapes creates a sense of depth, making the space more intriguing. First, the landscape experience, with framing and layering features, offer visual diversity and illusions. One may find Jichang Garden full of stories and landscapes as it often creates illusions to separate spaces while maintaining the atmosphere through the landscape composition and overlapping unusual layers. Second, Jichang Garden offers the experience of dynamic visual perception. In doing so, Jichang Garden combines standstill and mobile views, which offers opportunities and occasions for each individual to create different layers. Third, to recapitulate huge mountains and waters in nature, Jichang Garden overlaps a range of visual layers, reminiscent of nature outside the garden.

We have demonstrated the production of thin films containing multilayer graphene-coated copper nanoparticles (MGCNs) by a commercial electrodeposition method. The MGCNs were produced by electrical wire explosion, an easily applied technique for creating hybrid metal nanoparticles. The nanoparticles had average diameters of 10–120 nm and quasi-spherical morphologies. We made a complex-electrodeposited copper thin film (CETF) with a thickness of 4.8 μm by adding 300 ppm MGCNs to the electrolyte solution and performing electrodeposition. We measured the electric properties and performed corrosion testing of the CETF. Raman spectroscopy was used to measure the bonding characteristics and estimate the number of layers in the graphene films. The resistivity of the bare-electrodeposited copper thin film (BETF) was 2.092 × 10–6 Ω·cm, and the resistivity of the CETF after the addition of 300 ppm MGCNs was decreased by 2% to ~2.049 × 10–6 Ω·cm. The corrosion resistance of the BETF was 9.306 Ω, while that of the CETF was increased to 20.04 Ω. Therefore, the CETF with MGCNs can be used in interconnection circuits for printed circuit boards or semiconductor devices on the basis of its low resistivity and high corrosion resistance.

본 연구에서는 높은 제거성능을 가지는 분리막 개발하기 위해, 상전이법을 이용하여 이중구조의 중공사형 한외여과막을 제조하였다. 방사조건에서 에어갭, 내부응고제를 조절하여 중공사를 제조하였다. 분리막의 단면과 표면 모폴로지는 전계방출형주사현미경(FE-SEM)을 이용하여 관찰 할 수 있었으며, 수투과도와 제 거성능 평가는 0.2cm2 의 테스트 모듈을 제작하여 각각 측정하였다. 50nm PS latex bead를 이용하여 분리막의 공칭공경을 측정하였다. 측정결과 50nm 이하의 공칭공경을 가지는 것을 확인 할 수 있었으며, 박테리아 제거성능은 우수한 것을 확인 하였다.

이차전지용 분리막은 양극과 음극의 물리적 접촉을 방지하면서 전해질 내에서 리튬이온을 자유롭게 이동할 수 있게 하는 역할을 수행한다. 분리막은 절연 체이며, 이온전도도가 높은 특성을 가지고 있어야 한다. 다양한 분리막 중에서 도 일반적으로 사용되는 것은 다공성 구조의 폴리올레핀계 분리막이다. 그 중에 서도 폴리에틸렌 분리막은 가격이 저렵하고, 절연성, 화학적 안정성, 기계적 강 도 등이 우수한 특징을 가지고 있다. 본 연구에서는 컴파운드된 소재를 이용하여 3층 구조의 multi-layer 필름을 제조하였고 이축 연신기를 이용하여 속도와 연신비에 따라서 분리막을 제조하였다. 제조된 분리막 표면의 모폴로지를 확인 하기 위해서 FE-SEM을 이용하여 관찰하였고, porosity와 electrolyte up-take를 측정하였다. Porosity와 electrolyte up-take는 상용화된 제품인 celgard와 비교 한 결과 celgard 보다 우수한 성능을 가지는 것을 확인하였다.

The multi-layer combination provides a very narrow pore size distribution in a specific pore size range. By utilizing the multi-layer design equations developed for each individual layer of known pore properties, it is possible to design the multi-layer microfiltration media precisely to a tailor pore size distribution.

본 연구는 역삼투막의 막오염을 해결하기 위하여 실란-에폭시 층을 형성시킨 다층 표면개질법을 이용하여 역삼투막의 내오염성을 향상시키고자 하였다. Sol-gel법을 이용하여 Octyltrimethoxysilane (OcTES)을 막 표면에 가교를 통해 고분자화 하였으며 n = 8인 OcTES의 알킬기가 자발적인 self-assembly를 통하여 막 표면에 가지구조를 형성시켰다. 그 위에 ethylene glycol diglycidyl ether (EGDE)의 ether기를 ring-opening을 통해 막 표면에 친수성을 부여하여 역삼투막의 내오염성을 향상시키고자 하였다. FE-TEM, AFM을 이용하여 막의 단면 및 표면구조 분석을 하였고 막 표면의 ridge and valley 구조와 OcTES, EGDE의 다층 표면개질로 인한 bridge 구조를 확인하였으며, 거칠기의 증가를 통해 막 표면의 가지가 잘 형성되었음을 확인하였다. XPS를 통하여 막 표면의 화학구조에 대한 관찰과 표면개질이 잘 이루어졌음을 확인하였으며, contact angle 분석을 통해 표면개질막의 표면에 친수성이 부여되었음을 확인하였다. EGDE 표면개질 조건 최적화를 진행한 결과 EGDE 농도는 0.5 wt%, ring-opening 온도는 70°C가 가장 적합하였고, 내오염성 실험 결과 및 막오염지수(MFI)는 SUL-H10, PA-OcTES1.0, PA-OcTES1.0-EGDE0.5이 68.7, 60.4, 5.4 (10E-8 hr/mL2)로 나타나 다층 표면 개질막의 내오염성이 매우 향상되었음을 확인할 수 있었다.

This study analyzed the growth characteristics of multi-layer planted trees through their growth analysis and attempted to present a management strategy. The subject of research is the Citizen's Forest Area of Seoul Forest Park located in Seoul City. Field surveys were conducted three times over eight years from 2005 when the Seoul Forest Park was created through 2013. Labels were attached to all trees in the target area, and their species, height and DBH were investigated. To identify the growth differences by trees in each area, a detailed tree location map was drawn up for use in the analysis. To check soil health, soil organic matter, soil pH and soil microbial activities were analyzed. It turned out that the growth of the multi-layer planted trees in the target area of research was higher than that of the trees in existing urban parks, and that it was similar to that of trees in natural forests. Through a field survey in the area with a remarkably low growth, high-density planting problem, soil was found to have excess-moisture and there was the problem of Pueraria lobata covering. As a result of the analysis of the soil, it was found that its organic content in the soil was lower; soil pH was higher; and microbial activities in the soil were lower when compared to that of natural forests.

Ultraviolet curable coating solution was prepared with poly(ethylene glycol) acrylate oligomer and various mono and multi-functional acrylate monomers. The optical properties of UV cured coating layer on PET film with acrylate coating solution containing metal oxides, such as fumed silica and alumina, were also investigated to reduce light reflection on films. Poly(ethylene glycol) diacrylate which has 575 of average molecular weight was used as oligomer acrylate, and pentaerythritol triacrylate and dipentaerythritolpenta-/hexa acrylate were used as multi-functional acrylate monomers. Also, butyl acrylate was used to improve the adhesion as well as to reduce glass transition temperature to give a better flexability. 1-hydroxy cyclohexyl phenyl ketone was used as photoinitiator. We found out the metal oxides in acrylate coating solution showed a homogeneous dispersion from energy dispersive spectroscopy data. Transmittance and light reflection of coated PET film was measured with UV/vis spectrometer and gloss meter, respectively. When 1.00 g of both metal oxides was added into coating solution, the transmittance and the glossiness were reduced from 90% to 30% and from 190 GU to 35 GU, respectively. However, adding up to 1.00 g of the metal oxide into coating solution did not affect on the hardness of coating layer and adhesion between coated layer and PET film. Conclusively, we can control transmittance and light reflection of coated film by adjusting the amounts of metal oxide in coating solution.

본 연구는 수출과채류 시설원예 재배농가의 에너지 절감을 위한 보온자재의 개발을 목표로 수행되었으며 본 보에서는 시설 온실에 사용되어지는 단일 보온자재와 조합형 다겹보온자재에 대해 보온 특성을 조사하기 위하여 실험과 수치해석을 수행하였다. 실험해석의 경우, 실험모듈을 통해 내부 열원의 보온 효과를 조사하기 위해 내 외부의 온도는 K형 열전대와 데이터 획득 장치로 측정하였고, 측정된 온도를 통해 보온자재의 보온특성을 구명하였다. 수치해석은 상용코드인 CFX-11을 이용하였고 다겹보온자재의 내부 공기층은 고려하지 않고 해석하였으며 해석에서 필요한 다겹보온자재의 물성치인 열전도도는 과도 열선법에 의해 측정되는 QTM-500을 사용하였다. 실험 결과, 조합형 보온자재가 단겹 보온자재에 비해 약 45~55%까지 보온율이 높았고, 조합조건에 따라 보온 효과가 달라지기 때문에 보온성이 우수한 조합 조건을 얻을 수 있을 것으로 예상된다. 수치해석 결과와 실험 결과와의 보온율을 비교해 보면 수치해석의 결과가 실험 결과의 보온율에 비해 다소 저하하는 경향을 나타내었는데 이는 다겹보온자재 내부의 공기층을 무시하여 나타난 오차로서 향후 보온자재 내부의 공기층을 고려할 경우 보다 정확한 수치해석 결과를 얻을 수 있을 것이다.

The Charge Trap Flash (CTF) memory device is a replacement candidate for the NAND Flash device. In this study,Pt/Al2O3/La2O3/SiO2/Si multilayer structures with lanthanum oxide charge trap layers were fabricated for nonvolatile memorydevice applications. Aluminum oxide films were used as blocking oxides for low power consumption in program/erase operationsand reduced charge transports through blocking oxide layers. The thicknesses of SiO2 were from 30Å to 50Å. From the C-Vmeasurement, the largest memory window of 1.3V was obtained in the 40Å tunnel oxide specimen, and the 50Å tunnel oxidespecimen showed the smallest memory window. In the cycling test for reliability, the 30Å tunnel oxide sample showed an abruptmemory window reduction due to a high electric field of 9~10MV/cm through the tunnel oxide while the other samples showedless than a 10% loss of memory window for 104cycles of program/erase operation. The I-V measurement data of the capacitorstructures indicated leakage current values in the order of 10-4A/cm2 at 1V. These values are small enough to be used in non-volatile memory devices, and the sample with tunnel oxide formed at 850oC showed superior memory characteristics comparedto the sample with 750oC tunnel oxide due to higher concentration of trap sites at the interface region originating from the roughinterface.

The purpose of this study is to develop a method to evaluate solubility parameter interactions of cosmetic ingredients in formulations. This experimentation relates to the fabrication of new multi-layer cleansing oil which can remove make-up products such as lipstick, foundation, mascara, eye shadow, etc., and also can wash away dirt and sebum from the skin just in one stage process. Solubility parameter and specific gravity of various cosmetic ingredients are measured to explain the cleanliness of interface, detergency of make-up cosmetics on the skin surface. The results suggest that it is possible for cosmetic chemists to use solubility parameter of cosmetic materials for fabrication of new formulation of 3-layer cleansing oil.

Micro-scale copper bumps for build-up PCB were electroplated using a pulse-reverse method. The effects of the current density, pulse-reverse ratio and brightener concentration of the electroplating process were investigated and optimized for suitable performance. The electroplated micro-bumps were characterized using various analytical tools, including an optical microscope, a scanning electron microscope and an atomic force microscope. Surface analysis results showed that the electroplating uniformity was viable in a current density range of 1.4-3.0 A/dm2 at a pulse-reverse ratio of 1. To investigate the brightener concentration on the electroplating properties, the current density value was fixed at 3.0 A/dm2 as a dense microstructure was achieved at this current density. The brightener concentration was varied from 0.05 to 0.3 ml/L to study the effect of the concentration. The optimum concentration for micro-bump electroplating was found to be 0.05 ml/L based on the examination of the electroplating properties of the bump shape, roughness and grain size.

본 연구에서는 기본설계용 다층탄성이론을 이용한 역학적 거동해석 프로그램을 개발하였고, 현장에서 간편하게 사용될 수 있도록 Visual Basic 프로그래밍을 사용한 사용자 편의의 전 후 처리기법을 도입하여 본 연구에서 개발된 다층탄성해석 프로그램을 패키지화하였다. 패키지화한 상용프로그램에 아스팔트층의 깊이별 온도변화에 따른 영향과 보조기층, 노상과 같은 비구속층에서의 응력비선형성을 고려하여 아스팔트 포장구조해석모형을 개발하였다. 또한 개발된 해석과정을 이용하여 시험도로 실제 초기 현장계측자료의 현장검증을 실시하였다.

Micro-sized bumps on a multi-layered build-up PCB were fabricated by pulse-reverse copper electroplating. The values of the current density and brightener content for the electroplating were optimized for suitable performance with maximum efficiency. The micro-bumps thus electroplated were characterized using a range of analytical tools that included an optical microscope, a scanning electron microscope, an atomic force microscope and a hydraulic bulge tester. The optical microscope and scanning electron microscope analyses results showed that the uniformity of the electroplating was viable in the current density range of 2-4 A/dm2; however, the uniformity was slightly degraded as the current density increased. To study the effect of the brightener concentration, the concentration was varied from zero to 1.2 ml/L. The optimum concentration for micro-bump electroplating was found to be 0.6 ml/L based on an examination of the electroplating properties, including the roughness, yield strength and grain size.

겨울철 난방연료가 많이 소모되는 대규모 연동형 온실의 보온성을 향상시키기 위해 터널용 보온자재로 많이 사용되는 다겹보온커튼을 이용하여 기존의 부직포, 알루미늄스크린 등과 보온성을 상대적으로 비교하였다. 또한 다겹보온자재는 보온성이 높으나 두께가 두꺼워 전동모터를 이용한 자동개폐장치를 구성하기 어려운 단점이 있으므로 연동형 온실에 적용할 수 있는 고장이 적고 작동이 원활한 커튼 개폐장치를 개발하여 작물재배 및 난방연료 절감효과를 검토하였다. 다겹보온자재와 부직포, 알루미늄스크린 등의 보온커튼용 자재의 열 관류량을 측정하여 상대적인 보온효과를 비교한 결과 부직포에 비해 알루미늄스크린의 열관류량이 적었고, 알루미늄 및 화학솜의 3겹보온자재와 다겹보온자재는 알루미늄스크린에 비해 열관류량이 각각 23.3%, 43.0% 적게 나타나 다겹보온자재의 보온성이 우수한 것으로 판단되었다. 다겹보온자재는 여러 겹으로 누빈 조합형 보온자재이므로 두께가 두껍고 화학솜, 폴리폼 등 연신되기 쉬운 자재를 이용하므로 장기간 사용시 커튼 개폐장치의 예인선이나 보온자재가 처지게 될 우려가 있으므로 예인식과 권취식 개폐방법을 동시에 적용하여 보온커튼 개페장치를 구성하였다. 시험용 온실 에 다겹보온커튼과 부직포커튼을 설치하고 풋고추를 재배한 결과 다겹보온커튼 설치 온실에서 풋고추의 생육이 유리하였고 초기수량도 27% 정도 증수되었으며, 경유온풍기의 난방연료 소모량은 46%정도 절감되었다.

This paper is concerned with the vibration control of multi-layer structure for ultra-tall buildings and main tower of large bridge etc. We have modeled the multi-layer structure with the distributed mass system as the lumped mass system of two-degree-of-freedom structure and made experimental equipment. The LQ optimal control theory is applied to the design of the control system. The designed control system is simulated by computer. As a result, the LQ regulator showed good vibration control performance with impact excitation.