재가열에 따른 쌀의 품종별 물리적 특성을 관찰하기 위하여 고품질 밥쌀용으로 개발된 쌀(다보, 대보, 삼광, 수광, 신동진, 진수미, 하이아미)을 취반 후, 24시간 냉장, 냉장 후 재가열에 따른 물리적 특성을 분석하였다. 텐시프레셔를 이용한 품종별 식감특성을 분석한 결과, 경도는 삼광이 가장 낮았으며, 대보, 하이아미가 가장 높았다. 부착성, 탄력성, 찰기는 신동진이 가장 낮았다. 품종에 따라 밥을 취반한 다음 취반 직후, 취반 후 24시간 냉장보관, 냉장보관 후의 색도, 물성, 미세구조를 관찰하였다. 색도 분석결과, 취반 후 냉장 및 재가열에 의해 밥의 명도가 떨어지는 경향을 보였다. 취반한 후의 물성 분석 결과, 하이아미가 다른 품종에 비해 모든 항목에서 가장 높은 값을 보였다. 취반한 후 24시간 냉장 보관하였을 때는 경도, 점착성 및 씹힘성이 증가하였으며, 재가열에 의해 그 값은 다시 감소하였다. 주사전자현미경을 이용하여 밥의 미세구조를 관찰한 결과, 하이아미의 경우 취반 직후에 중앙부분의 입자가 치밀하게 뭉쳐 있음을 확인할 수 있었다. 냉장 저장 및 냉장 후 재가열에 의해 모든 품종에서 기공이 조금 더 명확하게 형성된 것을 확인하였다. 본 연구결과를 종합하여 볼 때, 벼 품종 특성에 따라 취반 후 재가열 및 보관에 따라 물리적 품질 특성이 달라지는 것으로 확인되었다. 추후 본 연구결과를 기초로 하여 취반 후 재가열 및 보관에 따른 이화학적 및 관능적 품질 분석 등과 같은 후속 연구를 통해 고품질 밥쌀용으로 개발된 쌀이 산업적 이용을 위한 응용연구가 지속적으로 수행되어야 한다고 판단된다.

Before purchasing new products, customers often have the desire to consult a variety of information sources (e.g., product tests, online reviews, frontline-employee advices) to make better purchase decisions (Broilo et al. 2016). However, the process of information search has changed tremendously over the past decades due to digitalization and an increasing number of online content (Jerath et al. 2014; Noble et al. 2006). Companies’ reactions to these new information search opportunities are very different. For example, Amazon decided to dispense with frontline-employees in their physical store (Forbes 2017). Other companies provide free Wi-Fi access in their bricks-and-mortar stores to support customer online activities (e.g., Woolworths and Best Buy). The purpose of this investigation is to uncover how frontline-employee interaction and mobile Internet search at the store affect consumers’ buying decision process. Initially, an exploratory study on different information sources at a physical store was designed with the aim to provide insights about the impact of information search on consumers’ product choice certainty. The qualitative data analysis shows that most participants had a main focus on content that is related to the considered products. However, there is an essential difference between the focus on perception of information and the source characteristics for participants in the mobile search and frontline-employee condition. While consumers who use their mobile devices to search online for information were more aware of information characteristics, consumers who get personal advice from a frontlineemployee mostly indicated expertise, credibility, and persuasiveness of the information source to be relevant. The results of a quantitative field study provide an initial examination of the influence of the information source on customers’ product choice certainty and its drivers. In this context, the investigation demonstrates that mobile Internet search as well as customer service can support customers in case of making a certain purchase decision for a product. However, customers who got their information by frontline-employees instead of using their mobile devices to search online for information are more certain about their product choice. This is in line with the results of the qualitative study, since an interaction with the frontline-employee leads to higher interactive decision making.

The objective of this study was to determine the effect of moisture content(45, 50, 55%), barrel temperature(140, 150°C), screw speed(150, 250 rpm) and two die configurations on the physical properties of extruded soy protein isolate(SPI). Water holding capacity(WHC), texture, integrity index and nitrogen solubility index(NSI) of extruded SPI were analyzed. The texture of extruded SPI was affected by the die configuration. The physical properties of extruded SPI was significantly influenced by barrel temperature, moisture content and die configuration. The increase in water injection rate and barrel temperature led to increase WHC and NSI. The higher water injection rate led to increase integrity index and texture(elasticity, cohesiveness, chewiness, cutting strength). The extruded SPI at 8 cm die configuration had higher integrity index than those of the 5 cm die configuration. Integrity index and NSI were negatively correlated. Thus, the die configuration can be useful to control quality of extruded SPI.

Surface morphology and optical properties such as transmittance and haze effect of glass etched by physical and chemical etching processes were investigated. The physical etching process was carried out by pen type sandblasting process with 15~20 μm dia. of Al2O3 media; the chemical etching process was conducted using HF-based mixed etchant. Sandblasting was performed in terms of variables such as the distance of 8 cm between the gun nozzle and the glass substrate, the fixed air pressure of 0.5bar, and the constant speed control of the specimen stage. The chemical etching process was conducted with mixed etching solution prepared by combination of BHF (Buffered Hydrofluoric Acid), HCl, and distilled water. The morphology of the glass surface after sandblasting process displayed sharp collision vestiges with nonuniform shapes that could initiate fractures. The haze values of the sandblasted glass were quantitatively acceptable. However, based on visual observation, the desirable Anti-Glare effect was not achieved. On the other hand, irregularly shaped and sharp vestiges transformed into enlarged and smooth micro-spherical craters with the subsequent chemical etching process. The curvature of the spherical crater increased distinctly by 60 minutes and decreased gradually with increasing etching time. Further, the spherical craters with reduced curvature were uniformly distributed over the etched glass surface. The haze value increased sharply up to 55 % and the transmittance decreased by 90 % at 60 minutes of etching time. The ideal haze value range of 3~7 % and transmittance value range of above 90 % were achieved in the period of 240 to 720 minutes of etching time for the selected concentration of the chemical etchant.

The purpose of this study was to present the meaningfulness of entrance guidance and efficient methods to the students who wanted to enter the universities related to physical education. And, the themes of this study include the process to select the cour

수용성 매체에서 젤-케스팅 공정을 이용하여 용융실리카를 기본으로 하는 다성분계 세라믹 코어 (中子)를 제조하고, 소결조건에 따른 제반 기계적 물성과 알칼리 부식용액에 의한 용출특성을 고찰하였다. 1000cP (at 50sec-1 ) 이하의 낮은 점도를 갖는 50vol%의 고농도 다성분계 세라믹 슬림의 제조가 가능하였다. 성형체는 안정화시킨 슬림을 몰드에 부어 상온에서 겔화시킨 후 25˚C, 80% 상대습도 분위기 하에서 48시간동안 건조시켜 제조하였으며 건조된 성형체에는 균열이 발생하지 않았다. 세라믹 코어 성형체의 소결온도가 상승할 수록 상온강도, 겉보기 밀도, 수축률은 시편의 기공도와 역비례하여 증가하였다. 세라믹 코어 소결체의 용출속도는 동일한 온도에서 알칼리 부식용액의 농도에 의존하였으며, 소결체의 기공도가 클수록 증가하였다.

형광등으로 사용되는 전기 에너지의 40%를 절약할 수 있는 방법으로서 그 반사값을 특수 은 반사박막으로 처리하여 고효율 및 내구성을 갖는 기술이 최근에 알려지고 있다. 이 박막들은 sputtering법을 이용한 것으로 주로 미국에서 생산되어지고 있다. 한편. evaporation 법으로 제작된 은 박막들은 일반적으로 반사효율에는 별문제가 없으나 부착력이 떨어지는 단점이 있다. 우리는 수년간 polyester를 기판으로 하고 몇가지 PVB 방법을 동원하여 고 반사율 및 부착력을 갖는 은경 박막을 확보하기 위해 연구를 해왔다. 그 결과, evaporation 법으로 제작된 은 박막은 96.4%의 반사율을 보이나 부착력은 12 Kg/cm2에 불과함을 확인하였고. sputter 법으로 제작한 시편들의 반사율은 96.3 %로 비슷하였으나 부착력이 /20 Kgcm2로 거의 두배로 뛰어올라 sputter법의 공정조건이 그 결과박막들의 물리적 특성에 미치는 긍정적 영향을 확인할 수 있었다. X-선 회절 분석결과 sputter의 경우에 (111)면이 우선성장함을 알 수 있었고, 시편의 단면으로부터 관찰된 치밀한 columnar 구조가 부착력을 향상시키고 있음이 확인되었다.

본 연구는 원격 체육수업을 통해 코로나-19에 대응하는 체육교사들의 어려움과 노력 과정을 심층적으로 이해하고 이를 바탕으로 원격 체육수업의 개선방안을 탐색하고자 하는 데 연구의 목적이 있다. 이를 위해 부산광역시 체육교과연구회 커뮤니티 소속 체육교사 344명을 대상으로 온라인 설문을 실시하고, 체육교사 6명을 대상으로 FGI(Focus Group Interview)를 실시하였다. 연구결과는 다음과 같다. 첫째, 온라인 개학 초반부에 체육교사들은 처음 겪어보는 온라인 개학과 원격수업에 대해 심각한 스트레스를 받으며 거부감을 보였으나 원격수업을 극복하고자 하는 의지를 보였다. 둘째, 원격수업을 실시하는 과정에서 체육교사들은 수많은 실패를 경험하면서도 집단지성의 힘과 집단 공동체성을 발휘해 원격수업에 도전하면서 극복하고자 하는 움직임을 보였다. 셋째, 체육교사들은 현재의 위기를 기회로 만들려는 노력을 기울이고 있었으며, 또다시 겪게 될지 모르는 미래의 원격수업에 미리 대비하도록 다양한 콘텐츠와 교수·학습 방법을 개발해야 한다고 하였다. 이러한 연구결과를 바탕으로 원격 체육수업을 위한 교육계와 교사들의 다양한 노력의 필요성에 대해 제언하였다.

Purpose: This study tested the health action process approach (HAPA) as a motivational model for physical activity in a longitudinal sample of 483 adults (275 males, 208 females) over a 10 week period. Methods: Participants' action self-efficacy, decision balance for exercise, perceived risk awareness and intention were measured at baseline (Time 1). Maintenance self-efficacy, action planning and action control were measured 5 weeks later (Time 2). Physical activity behavior was measured 10 weeks after baseline (Time 3). Structural equation modeling was used to investigate the HAPA model. Results: The first model showed that intention was a significant predictor of physical activity behavior. The second model, which included the volitional components of the HAPA model, did significantly increased the proportion of behavior explained. The third model showed that intention, maintenance self-efficacy and action control were positive predictors of physical activity behavior. Conclusion: Findings suggest that HAPA provides a useful framework for identifying determinants of physical activity intention and behavior within a group of middle-aged adults.

This study was conducted to assess the characteristics of pigment wastewater and the removal rates of appropriate treatment by physical, chemical and biological process, and the possibility of reuse for effluent. Based on the results, the wastewater qualities of pigment were pH 5.1±3.4, temperature 43.0±5.0℃ BOD 1,431.4±589.6㎎/ℓ, COD 2,282.8±66.5㎎/ℓ, turbidity 1,340±82ONTU, color 243.0±147.Ounit, Pb 36.5±9.5㎎/ℓ and Cr^+6 10.3±1.3㎎/ℓ, respectively. The removal rates of adsorption by activated carbon and filter process were BOD 40.6%, COD 57.0%, turbidity 89.6%, color 87.2%, Pb 86.0% and Cr^+6 10.6%, respectively. And the removal rates of reduction, neutralization, coagulation and air floatation process were BOD 18.2%, COD 24.3%, turbidity 74.3%, color 56.7%, Pb 68.6% and Cr^+6 97.8%, respectively. The removal rates of activated sludge process were BOD 95.9%, COD 86.0%, turbidity 27.8%, color 25.2%, Pb 26.9% and Cr^+6 50.0%, respectively. The total removal rates of treatment by physical, chemical and biological process were BOD 98.0%, COD 95.4%, turbidity 98.1%, color 95.8%, Pb 97.0% and Cr^+6 99.0%, respectively. According to the test results for possibility of reuse with coagulation-adsorption by activated carbon process of effluent, COD was higher than that of raw water and others were similar to that of raw water, thus, it is considered to be reused.