In construction industry, large scales of construction waste has been produced with consumption of natural resources, but its efficient reutilization has not been sufficient yet. Therefore, this study has a main objective of using high volume of recycled aggregate by investigate the effect of replacement ratio of natural coarse aggregate by recycled one on the strength of concrete.

The use of recycled aggregate has been highly recommended for the environmental protection of nature and absolute shortage of natural aggregate's resource, but experimental methods adequate for each recycled product have not been established and also the data have not been enough to ensure the control of concrete quality. Thus, this study has an aim of applying high volume of recycled aggregate to the fabrication of concrete by investigating that production methods of recycled aggregate and its replacement ratio have effects on the performance of concrete.

This study evaluates the material performance of slump value and compressive strength of the concrete which was made by recycled sand and blast furnace slag powder(BFSP). The main variables are replacement ratio of BFSP. As a result, it was evaluated that more detailed evaluation is needed in long-term strength development and the compensation of slump value to the replacement ratio of BFSP.

So far, various experiments were carried out and published on recycled aggregates. But the structural use of recycled aggregates were very limited. To use a recycled coarse aggregate as structural materials, evaluation of compressive strength and splitting tensile strength were proceed according to replacement ratio of recycled coarse aggregate.

Environmental problems caused by the occurrence of carbon dioxide are recognized as a critical issue throughout the world. As a result, a measure for the use of cement and improvement of its quality must be sought out. In order to reduce the occurrence of carbon dioxide during the manufacturing process of cement, this study creates an alkali-activated slag cement that utilizes ground granulated blast furnace slag, an industrial by-product, and substitutes metakaolin as an alternative for silica fume to improve the process of manufacturing high-strength concrete and its quality. The study discerns the mechanical characteristics by measuring the flexibility and compressive strength through the mortar matrix and discerns the durability by conducting an acid resistance test and chloride ion penetration resistance test. Also, the study discerns the hydration products through an XRD test. Based on the results of such tests, it is anticipated that it may be used as a secondary product for concrete or buildings that require superior long-term strength and durability compared to regular Portland cement. However, as no clear results were found in this study regarding the substitution of metakaolin, it displayed mixed results in comparison to previous studies. Nevertheless, it is expected that metakaolin will become a more superior admixture if its issues are improved through continuous research studies.

In this study, four reinforced concrete beams, replacing recycled coarse aggregate with PVA fiber(BSPG-R series), were constructed and tested under monotonic loading. Experimental programs were carried out to improve and evaluate the structural performance of such test specimens, such as the load-displacement, the failure mode and the maximum load carrying capacity. all the specimens were modeled in 1/2 scale-down size.

This study investigated the effect of cement type and ground granulated blast furnace slag (GGBS) on the mechanical properties and workability of grout for offshore PSC structures. As the replacement ratio of GGBS increased, the flowability of the grout increased and both intial and final setting times of grout was delayed regardless of cement type. However, the effects of GGBS on the bleeding of grout were different according to the type of cement: as the ratio of GGBS increased, less bleeding was observed for the grout with typeⅠ cement whereas higher bleeding was generated for the grout with type Ⅲ cement. However, there was no significant difference in their compressive strength at 28 day according the different replacement ratio of GGBS from 0 to 40%.

In this study, It was found that replacing a large amount of mineral admixture, we satisfied the target, compressive strength of 30, 50MPa and manufactured lightweight concrete reducing CO2 emissions up to 42.1～52.8% comparing normal concrete

In this study, the experiments were carried out in order that flexural behavior evaluated High-strength Concrete Beams reinfrced with FRP plates according ro replacement ration of recycled aggregate. As a result, maximum load was higher than existiong of unreinforced when the reinforced with FRP plates and no decrease in load about increased fo replacement ration of recycled aggregate. Some specimens was greater than ACI 440-2R referemce value.

In this study, Blast furnace-based has been manufactured by utilizing recycled aggregates and gypsum as alkali activator. Comparing with the common geopolymer concrete, Using recycled aggregates and gypsum as activator could be identified to applied in low strength concrete.

이 연구에서는 고로슬래그 미분말을 사용한 프리캐스트 보의 전단성능에 대하여 평가하였다. 실험체는 고로슬래그 미분말 치환율에 따라 총 4체의 실험체를 제작하였다. 모든 실험체는 전단경간비 2.5, 보의 폭 200mm, 유효깊이 300mm이며, 3점 가력을 받는 단순보로 계획하였다. 또한 이 연구에서는 실험체의 전단강도를 예측하기 위하여 기존 전단강도 예측식을 이용하여 실험결과와 비교하였으며, 총 89개의 기존 전단 실험결과를 이용하여 실험결과와 비교 분석하였다. 실험결과, 고로슬래그 미분말을 치환한 실험체는 포틀랜드 시멘트만을 사용한 실험체와 비교분석한 결과 유사한 전단성능을 나타내었다.

Diagonally reinforced concrete coupling beam has complicated reinforcement details. To solve this problem, it is necessary to develop the alternative reinforcement details. The objective of this study is to investigate strain characteristics of coupled shear wall according to the replacement ratio of headed-bar.

Reinforced concrete coupled shear wall systems in medium and high-rise construction, where RC beams couple two or more RC walls have been frequently used. The objective of this study is to investigate seismic behavior of coupled shear wall according to the replacement ratio of headed-bar.

본 연구에서는 실리카흄 대체재로 활용 가능한 실리카 흄 무혼입 결합재(SFFB)의 치환율에 따른 고강도 콘크리트의 품질특성을 비교․분석하기 위하여, 실리카흄, SFFB의 2수준과 물-결합재비는 25, 35% 치환율은 실리카 흄 10%, SFFB 5, 10 15(%)의 4수준으로 설정하였다. 실험을 실시한 결과, 목표 유동성을 확보하기 위한 고성능감수제의 첨가율은 물-결합재비가 낮을수록 증가하였으며, SFFB가 실리카 흄 보다 저흡수성을 갖는 재료적 특성으로 인해 고성능감수제의 첨가율이 감소하는 경향을 나타내었다. 압축강도에서는 SFFB 치환율이 10%일 경우 인장강도에서는 치환율이 15%일 경우 가장 우수한 강도를 나타내었으며, 자기수축에서는 W/B와 SFFB의 치환율과 상관없이 Plain(SF)에 비해 수축이 저감하는 것으로 나타났다.