ICT 산업의 글로벌 시장을 선점할 수 있는 다음 세대의 개발이 필요한 상황이 일어남에 따라 웨어러블 디바이스 의 생체 신호 모니터링에 대한 관심이 크게 증가하고 있다. 이에 따라 본 연구에서는 히스테리시스가 적은 E-Band를 사용하여 단일벽 탄소나노튜브(SWCNT) 분산 용액에 함침 공정을 통해서 저항형 직물 인장 센서(Resistive textile strain sensor)를 개발하였다. 전기전도성이 부여된 e-band에 저항 신호를 측정하기 위해 만능재료시험기(UTM)과 Microcontroller unit인 아두이노와 LCR 미터를 이용해서 인장의 변화에 따른 저항 변화를 측정하였다. 원단으로 이 루어진 텍스타일 스트레인 센서의 특성상 발생하는 다양한 노이즈들을 효과적으로 처리하기 위하여 신호처리 과정 (Signal processing)의 노이즈 필터링의 이동평균 필터, 사비츠키-골레이 필터, 중앙값 필터들을 사용하여 센서의 필 터 성능을 평가하였다. 그 결과 이동평균 필터의 필터링 결과의 신뢰도가 최소 89.82%, 최대 97.87%으로 이동평균 필터링이 텍스타일 스트레인 센서의 노이즈 필터링 방식으로 적합하였다.

In this article, Pb2Ba1.7Sr0.3Ca2Cu3O10+δ superconductor material was synthesized using conventional solid-state reaction method. X-ray diffraction (XRD) analysis demonstrated one dominant phase 2223 and some impurities in the product powder. The strongest peaks in the XRD pattern were successfully indexed assuming a pseudo-tetragonal cell with lattice constants of a = 3.732, b = 3.733 and c = 14.75 Å for a Pb-Based compound. The crystallite size and lattice strain between the layers of the studied compound were estimated using several methods, namely the Scherrer, Williamson-Hall (W.H), sizestrain plot (SSP) and Halder Wagner (H.W) approach. The values of crystallite size, calculated by Scherrer, W.H, SSP and H.W methods, were 89.4540774, 86.658638, 87.7555823 and 85.470086 Å, respectively. Moreover, the lattice strain values obtained by W.H, SSP and H.W methods were 0.0063240, 0.006325 and 0.006, respectively. It was noted that all crystallite size results are consistent; however, the best method is the size-strain plot because it gave a value of R2 approaching one. Furthermore, degree of crystallites was calculated and found to be 59.003321%. Resistivity analysis suggests zero-resistance, which is typical of superconducting materials at critical temperature. Four-probe technique was utilized to measure the critical temperature at onset Tc(onset), zero resistivity Tc(off set), and transition (width ΔT), corresponding to temperatures of 128 K, 116 K, and 12 K, respectively.

This study aimed to develop strain-specific polymerase chain reaction (PCR) primers to detect Fusobacterium hwasookii KCOM 1249T, F. hwasookii KCOM 1253, F. hwasookii KCOM 1256, F. hwasookii KCOM 1258, and F. hwasookii KCOM 1268 on the basis of nucleotide sequences of a gene specific to each strain. The unique genes for each F. hwasookii strain were determined on the basis of their genome sequences using Roary. The strain-specific PCR primers based on each strain-specific gene were designed using PrimerSelect. The specificity of each PCR primer was determined using the genomic DNA of the 5 F. hwasookii strains and 25 strains of oral bacterial species. The detection limit and sensitivity of each strain-specific PCR primer pair were determined using the genomic DNA of each target strain. The results showed that the strain-specific PCR primers correspond to F. hwasookii KCOM 1249T, F. hwasookii KCOM 1253, F. hwasookii KCOM 1258, F. hwasookii KCOM 1256/F. nucleatum subsp. polymorphum KCOM 1260, or F. hwasookii KCOM 1268/Fusobacterium sp. oral taxon 203 were developed. The detection limits of these strain-specific PCR primers ranged from 0.2 to 2 ng of genomic DNA for each target strain. The results suggest that these strain-specific PCR primers are valuable in quality control for detecting specific F. hwasookii strains.

(Bi1/2Na1/2)TiO3 (BNT)-based ceramics are considered promising candidates for actuator application owing to their excellent electromechanical strain properties However, to obtain large strain properties, there remain several issues such as thermal stability and high operating fields. Therefore, this study investigates a reduction of operating field in (0.98-x)Bi1/2Na1/ 2TiO3-0.02 BiAlO3-xSrTiO3 (BNT-2BA-100xST, x = 0.20, 0.21, 0.22, 0.23, and 0.24) via analyses of the microstructure, crystal structure, dielectric, polarization, ferroelectric and electromechanical strain properties. The average grain size of BNT-2BA- 100xST ceramics decreases with increasing ST content. Results of polarization and electromechanical strain properties indicate that a ferroelectric to relaxor state transition is induced by ST modification. As a consequence, a large electromechanical strain of 592 pm/V is obtained at a relatively low electric field of 4 kV/mm in 22 mol% ST-modified BNT-2BA ceramics. We believe that the materials synthesized in this study are promising candidates for actuator applications.

취성특성을 가진 탄소섬유복합체의 인장특성을 결정하기 위해 ASTM D 3 0 39에 따라 인장시험을 실시하였다. 극한시 점에 박리, 부분파단으로 인해 스트레인 게이지의 계측값의 변동성이 커져 신뢰성을 확보하기 어렵기 때문에 극한응력과 탄성 계수를 이용한 유효극한변형률을 제안하고, 극한계측변형률과 상호보완하였다. 특히 게이지가 비정상적으로 작용할 경우에도 적용이 가능하다는 장점이 있다. 또한 유효극한변형률을 결정하는 탄성계수는 단일시편에서 여러 변형률 구간에 대하여 평가하여 비교 검증할 수 있다.

The effect of sintering conditions on the austenite stability and strain-induced martensitic transformation of nanocrystalline FeCrC alloy is investigated. Nanocrystalline FeCrC alloys are successfully fabricated by spark plasma sintering with an extremely short densification time to obtain the theoretical density value and prevent grain growth. The nanocrystallite size in the sintered alloys contributes to increased austenite stability. The phase fraction of the FeCrC sintered alloy before and after deformation according to the sintering holding time is measured using X-ray diffraction and electron backscatter diffraction analysis. During compressive deformation, the volume fraction of strain-induced martensite resulting from austenite decomposition is increased. The transformation kinetics of the strain-induced martensite is evaluated using an empirical equation considering the austenite stability factor. The hardness of the S0W and S10W samples increase to 62.4-67.5 and 58.9-63.4 HRC before and after deformation. The hardness results confirmed that the mechanical properties are improved owing to the effects of grain refinement and strain-induced martensitic transformation in the nanocrystalline FeCrC alloy.

민자주방망이버섯의 대량 생산 및 상업적 실용화를 위하여 야생 균주에 비해 재배기간이 짧고 자실체 발생이 잘 이루어지는 신품종을 육성하기 위하여 본 연구를 수행하였다. 민자주방망이버섯 유전자원 18계통을 수집하고 볏짚발효배지를 이용한 상자 재배를 통해 자실체가 발생한 4계통을 교배모본으로 선발하였다. 단포자 교배를 통해 671조합의 교배를 하였으나 ‘CBMLN-19’ 계통과 ‘CBMLN-30’ 계통을 교배한 17조합만이 교배가 이루어 졌다. 그 중 균사 생장이 빠르고 밀도가 높은 8계통을 1차 선발하였다. 볏짚발효배지에 유전자원 14계통, 교배계통 8계통을 접종 후 배양기간을 조사한 결과 교배계통 중 6계통은 20일만에 배양이 완료되었으며 유전자원 14계통 중 7계통은 배양이 완료되기 까지 40일 이상이 소요되어 대부분의 교배계통에서 배양기간이 20일 이상 단축되었다. 배양이 완료된 계통은 식양토를 1~2 cm 복토하여 후 배양을 하였고 균사 배양이 완전히 완료되었을 때 균긁기를 한 후 자실체 발생을 유도하였다. 발생 유도 환경은 온도 14 ̊C, 상대습도 95% 이상, CO2농도 1,500~2,000 ppm 이었으며, 야간에 6℃로 온도를 낮추어 하온 충격을 주었다. 그 결과 유전자원 ‘CBMLN-31’, ‘CBMLN-44’ 2계통, 교배계통 ‘CBMLN-96’, ‘CBMLN-103’ 2계통 총 4계통에서 자실체가 발생하였다. 접종 후 자실체가 발생되기까 지의 기간은 대조구인 유전자원 ‘CBMLN-31’이 100일로 가장 길었고, 교배계통인‘CBMLM-103’이 45일로 가장 짧았다. 자실체 특성 조사 결과 교배계통인 ‘CBMLN- 103’은 개체중이 1.9 g으로 작은 형태를 나타냈으며, 상자 당 유효경수 123개로 4계통 중 발생량이 가장 많았다. 또 다른 교배계통 ‘CBMLN-96’은 개체중이 5.5 g 으로 ‘CBMLN-103’ 보다 큰 형태를 나타냈으나, 상자 당 유효 경수는 30개로 발생량이 적었다. 수량성 조사 결과 대조구인 ‘CBMLN-31’계통에서 상자 당 수량 783 g으로 가장 높게 나타났고, 교배계통 ‘CBMLN-96’은 165 g, ‘CBMLN-103’은 232 g으로 나타났다. 교배계통 2계통에서 수량성은 대조구 ‘CBMLN-31’보다 낮았지만 자실체 발생량이 많았으며, 재배기간이 40일~55일 단축되어 이 2계통을 우량계통으로 선발하고자 한다.

The status of probiotics is increasing worldwide and the range of application of probiotics is also being extended to the livestock industry. The use of probiotics in the swine industry aims to improve animal health and productivity by forming a healthy gut microbiota. Intensive pig breeding, a common breeding method in modern society, causes physiological stress in pigs, resulting in imbalance of the intestinal microbiota and dysfunction of the intestinal barrier. We conducted a scientific research on the properties of probiotics for multi-strain probiotics (MSP) and observed the economic benefits and efficiency of culturing MSP through a self-cultivation system in livestock. Initially, we observed alteration occurred by MSP application in the gut microbiota of pig. MSP were characterized to have resistance to digestive juices such as gastric acid and bile, followed by colonization in the target organ, the gastro-intestinal tract (GIT). In addition, MSP was also confirmed to have antibacterial ability against pathogenicity that most frequently infected in the swine industry and showed low resistance to antibiotics which means guaranteed stability when added to feed. The growth rate of probiotics in the optimized medium used in the self-cultivation system was suitable for efficiently and economically culturing and feeding pigs with high concentrations of probiotics, considering the ingredient price and the growth efficiency. We observed the significant alteration of gut microbiota of pig by application of MSP. Importantly, the MSP supplementation significantly increased the beneficial bacteria genus of Bifidobacterium that confer a health benefit to the host in pig GIT, whereas decreased the number of harmful bacteria including coliforms. In addition, MSP influenced on the uniformity of gut microbiota at both of sow and weaning pigs. Taken together, the application of MSP with high concentration of probiotics using self-cultivation system may critically improve the pig health by regulation intestinal microbiota.

A new cultivar ‘Sansanhyang’ was bred from monokaryotic strains of Sanbackhyang and SANJO 707ho by mono-mono hybridization method. Cap was convex and brown, it was 70 mm in diameter and 16 mm in thickness. The distribution of scales was whole and the scales were brown and slightly brown. The arrangement of gill was ripple and gill density was dense. Stipe was cream colored and fluff was medium. Sansanhyang had 100day cultivation period and fruiting bodies sporadic occurrence. It was a medium-low temperature strain and the temperature for fruiting body formation was 10-16°C. The ratio of fruiting body production was the 1st flush 89%, the 2nd flush 6% and the 3rd flush 5%. Sansanhyang was different from Sanbackhyang by its convex cap, 70 mm of cap diameter, and 40.5 mm of stipe length. Sanbackhyang had convex cap, 71 mm of cap diameter and 56.9 mm of stipe length.