High-strength low-alloy steel is one of the widely used materials in onshore and offshore plant engineering. We investigated the alloying effect of solute atoms in α-Fe based alloy using ab initio calculations. Empirical equations were used to establish the effect of alloying on the Vicker’s hardness, screw energy coefficient, and edge dislocation energy coefficient of the steel. Screw and edge energy coefficients were improved by the addition of V and Cr solute atoms. In addition, the addition of trace quantities of V, Cr, and Mn enhanced abrasion resistance. Solute atoms and contents with excellent mechanical properties were selected and their thermal conductivity and thermal expansion behavior were investigated. The addition of Cr atom is expected to form alloys with low thermal conductivity and thermal expansion coefficient. This study provides a better understanding of the state-of-the-art research in low-alloy steel and can be used to guide researchers to explore and develop α-Fe based alloys with improved properties, that can be fabricated in smart and cost-effective manners.

Low alcohol (6%) wines were manufactured using Campbell Early. To develop the sterilization process of low alcohol wines, red wines were heat sterilized, and rose wines were nonthermal sterilized by concentration using potassium metasulfite and potassium sorbate. Samples were stored at 25℃ and quality characteristics were investigated by period. Results of this study revealed the pH of the samples after sterilization ranged from 3.15 to 3.19, and the total acidity of wines ranged from 0.011 to 0.024%. The free SO2 contents of wines ranged from 13.00 to 29.678 mg/L, and the total SO2 contents of wines ranged from 47.50 to 121.00 mg/L. L (lightness) of wines decreased whereas a (redness) and b(yellowness) increased. The hue value of wines ranged from 0.52 to 1.03, and decreased significantly(not including rose sweet wines). The color intensity of red and rose dry wines after sterilization increased, whereas red and rose sweet wines decreased. The DPPH radical scavenging activity of red wines and rose wines ranged between 75.50 to 89.23%, and 36.60 to 56.54%, respectively. The total polyphenol contents were 57.51~182.63 mg%. Results of this study provide scientific information to establish the sterilization process of low alcohol wines.

Low thermal conductivity carbon fibers from polyacrylonitrile (PAN) are currently being explored as an alternative for traditional rayon-based carbon fibers with a thermal conductivity of 4 W/m K. Compared to multiple component electrospinning, this research demonstrated another feasible way to make low thermal conductivity carbon fibrous material by electrospinning PAN followed by carbonization and alkali activation. The effects of activation condition on microstructure, pore formation, and thermal conductivity of the resultant carbon nanofibrous material were investigated. The processing-structure-thermal conductivity relationship was revealed and mechanism of thermal conductivity reduction was discussed. The overall thermal conductivity of the prepared carbon nanofibrous material is a result of combined effects from factors of carbon structure and number of pores rather than volume of pores or specific surface area. The activated carbon nanofibrous materials showed thermal conductivity as low as 0.12 W/m K, which is a reduction of ~ 99% when compared to that of solid carbon film and a reduction of ~ 95% when compared to that of carbon nanofibrous material before activation.

A low thermal expansion ceramic, cordierite (2MgO·2Al2O3·5SiO2), was synthesized using pyrophyllite. Pyrophyllite usually consists of SiO2 and Al2O3, which are the main components of cordierite. MgCO3 and Al(OH)3 were added in various amounts to pyrophyllite and fired for synthesis and sintering. α-cordierite crystallized from 1000 oC with mixing of 20 wt% MgCO3 and 1.7 wt% Al(OH)3, and un-reacted cristobalite was also detected with the cordierite. As the temperature was increased to 1400 oC, the cordierite yield was gradually increased. Powder compacts of the synthesized cordierite were sintered between 1250 oC ~ 1400 oC; the sintered samples showed a low thermal expansion coefficient of 2.1 × 10−6/ oC and typical sintering behavior. It is anticipated that it will be possible to synthesize cordierite ceramics on a mass production scale using the mineral pyrophyllite.

The effect of alpha phase on the fatigue properties of Fe-29%Ni-17%Co low thermal expansion alloy was investigated. Two kinds of alloys (Base alloy and Alpha alloy) were prepared by controlling the minimal alloy composition. Microstructure observation, tensile, high-cycle fatigue, and low-cycle fatigue results were measured in this study. The Base alloy microstructure showed typical austenite γ phase. Alpha alloy represented the dispersed phase in the austenite γ matrix. As a result of tensile testing, Alpha alloy was found to have higher strengths (Y.S. & T.S.) and lower elongation compared to those of the Base alloy. High cycle fatigue results showed that Alpha alloy had a higher fatigue limit (360MPa) than that (330MPa) of the Base alloy. The Alpha alloy exhibited the superior high cycle fatigue property in all of the fatigue stress conditions. SEM fractography results showed that the alpha phase could act to effectively retard both fatigue crack initiation and crack propagation. In the case of low-cycle fatigue, the Base alloy had longer fatigue life in the high plastic strain amplitude region and the Alpha alloy showed better fatigue property only in the low plastic strain amplitude region. The fatigue deformation behavior of the Fe-29%Ni-17%Co alloy was also discussed as related with its microstructure.

PURPOSES : Hot-mix asphalt(HMA) concretes show a trend of strength increase at low temperature due to binder stiffness increase, but strength decrease below a ceratin low temperature. This is due to the differential thermal contraction(DTC) which is induced by a significant difference in coefficients of thermal contraction between aggregate and asphalt which is coated around the aggregate. This DTC damage is well known to occur in HMA concrete, but is not yet investigated in warm-mix asphalt(WMA) concretes. METHODS : To evaluate DTC damage on WMA in this study, the flexural strength(Sf) of WMA concretes, which were produced at 30~40℃ lower temperature, was evaluated in comparison with that of HMA at -5, -15 and -25℃. RESULTS : Most of WMA and HMA mixtures showed flexural strength increase down to -15℃ and decrease below -15℃. this type of strength reduction below -15℃ can e explained as the effect of differential thermal contraction that is a consequence of the large difference in coefficients of thermal contraction between aggregate and asphalt. the property reduction of WMA is similar the result of previous works dealt with HMA mixtures. CONCLUSIONS : Even though there is some differences by materials used, the WMA concretes showed a significantly lower DTC damage than HMA concrete at low temperature at α=0.05 level.

Structure Insulated Panel (SIP) is an wooden structure material with which structure and insulation functions are satisfied. Hence, it would be a cost-effective model to implement low energy house which has higher insulation and structure performance and which the wall thickness is able to be reduced. In this study, performance of thermal insulation and fire resistance were evaluated in order to verify applicability to low energy house. Fire resistance test is performed on vertical load bearing members for partitions, and the test results satisfy one hour of fire resistance condition according to KS F 2257. The members include two layers of fireproof gypsum board with thicknesses of 12.5mm attached to SIP. Thermal insulation performance is satisfied with the 2012 standard (0.225W/㎡·K). As the performance of resistance and thermal insulation are satisfied, SIP is expected to be applied to low energy building materials. In the future, the structural safety will be confirmed by structural performance and seismic performance test and the guidelines for distribution will be drawn up.

Metal(Zinc) soap and mixed metal(Zn/Ba) soap were synthesized with good structures and characterized by IR and H-NMR. The H-NMR spectrums of the synthesized soaps were in very good accordance with the structures proposed by earlier workers. The mixed metal soaps with various costabilizers(acid or metal content effect), which added in order to investigate the thermal stabilization effect at low and high temperature, were investigated the thermal stabilization effect. The temperature effect is relation to the metal content effect than acid effect. In case of mixed metal soap, the high thermal stabilization effect improved with increasing Barium content. As the Zinc content increase the low temperature thermal stabilization effect improved, but the high temperature thermal stabilization effect showed an opposite tendency.

Modified thermal annealing was applied to the activation of the polycrystalline silicon films doped as p-type through implantation of B2H6. The statistical design of experiments was successfully employed to investigate the effect of rapid thermal annealing on activation of polycrystalline Si doped as p-type. In this design, the input variables are furnace temperature, power of halogen lamps, and alternating magnetic field. The degree of ion activation was evaluated as a function of processing variables, using Hall effect measurements and Raman spectroscopy. The main effects were estimated to be furnace temperature and RTA power in increasing conductivity, explained by recrystallization of doped ions and change of an amorphous Si into a crystalline Si lattice. The ion activation using rapid thermal annealing is proven to be a highly efficient process in low temperature polycrystalline Si technology.

냉축열 잠열재로 Na2SO4.10H2O를 선정하여 냉축열을 위한 잠열축열 온도 수준을 NH4Cl과 KCI을 잠열온도 조절제로 활용하여 16℃에서 -0.3℃까지 조절하였으며, 상변화 사이클에 의한 열특성 변화 추이와 물성의 안정성을 실험 분석하여 다음과 같은 결과를 얻을 수 있었다. 1. 냉축열재로 선택한 Na2SO4.10H2O는 물성이 불안정한 상변화 잠열 재였으나, 조핵제로 BRX를, 증점제로 CBP를 첨가하여 물성을 안정시켰으며, NH4Cl과 KCl을 상변화 온도조절제로 선택하여 상변화 온도를 조절할 수 있다. 2. SSD＋NH4Cl서 NH4Cl을 g~21wt%로 증가시킴에 따라 상변화 온도는 16~-0.3℃로 조절할 수 있었으며, 잠열축열량은 30kca1/kg에서 23.4kca1/kg으로 감소하였고, 상변화 온도조절제, KCl을 l7wt%에서 25wt%로 증가시킴에 따라 상변화 온도를 14℃에서 4℃까지 조절할 수 있었다.

저분자량 (M=1970)을 갖는 poly(styrene)(PS)와 poly(vinymethylether) (PVME)의 블렌드를 열산화시킬 때 PVME의 분자량 감소 속도는 높은 분자량을 갖는 PS와 PVME의 블렌드를 열산화 시킬 때의 PVME 분자량 감소 속도보다 훨씬 느리다. 열산화 과정 동안 PS의 분자량은 변화하지 않았으며 저분자량의 PS의 일부가 산화된 PVME를 분리할 때 함께 녹음을 알 수 있었다. 저분자량의 PS의 모델 화합물로써 2. 4-diphenylpentane을 합성하였고 1%，5%，10%의 모델 화합물을 PVME에 첨가하여 열산화 시켰다. 이 모델 화합물을 첨가하여 PVME의 열산화를 약간 지연시킬 수 있음을 알 수 있었다.

저 분자량(Mw=1970)의 poly(styrene)(PS)와 poly(vinylmethylether)(PVME)의 블렌드를 열 산화시킬 때 저 분자량의 PS의 첨가량이 증가할수록 유도기간이 증가하며 열 산화속도는 감소함을 알 수 있었다. 열 산화과정 동안 저 분자량 PS와 PVME 블렌드는 상 분리를 보이지 않았다. 저 분자량을 갖는 PS와 PVME 블렌드에서 PVME의 산화 속도는 높은 분자량을 갖는 PS와 PVME 블렌드에서 PVME의 열 산화 속도보다 훨씬 느려짐을 보였다.

Li2O-Al2O3-SiO3계 결정화유리의 저온합성을 위하여 출방원료로서 각 해당 금속 알콕시드를 사용하였다. 알코올을 용매로 충분히 첨가하고, drying control chemical additive로 dimethy1 formamide를 적당량 첨가한 혼합용용액을 과잉의 물로 충분히 가수분해시킨 습윤겔을 저온으로 건고하여 균열이 없는 건조된 monolith겔을 합성하였다. 건조겔로부터 750-950˚C로 10시간 이상 소결하여 저열팽창성을 나타내는 β-eucrypytite(β-quartz 고용체), Li2O· Al2O3· 3SiO2및 β-spodumene등의결정상을 석출시켰다.

2014년 슬러지 발생량은 10,187ton/day로 2008년 기준 약 7,446ton/day에 비해 발생량이 약 37% 증가하였다. 하수슬러지의 발생량은 매년 증가할 것으로 예상되기 때문에 하수슬러지 발생량을 최소화 시키고 자원화하기 위한 여러 가지 대안 중 혐기성 소화방법과 슬러지 감량화 기술이 대안으로 제시되고 있다. 소화조는 장시간의 체류시간, 설계 값보다 낮은 소화효율 등의 고질적인 문제가 있으므로 슬러지를 효과적으로 처리 하기위해 이용 효율을 극대화하는 방안이 필요하다. 따라서 소화조 투입 전 단계에서 하수슬러지를 가용화하는 전처리를 실시하여 가수분해를 촉진시키고, 소화 효율을 높이는 방법을 이용하고 있다. 전처리 공정은 열적처리, 물리·화학적 처리, 생물학적 처리 등으로 구분되며, 이중 열적전처리 공정은 고온조건이나 저온조건에서 고분자 형태로 존재하는 슬러지를 저분자 형태로 전환시켜 바이오가스의 생산량과 소화효율을 증대시키는데 효과적인 것으로 알려져 있다. 열적전처리 중에서도 저온 열적전처리는 고온 열적전처리에 비해 공정 운전에 들어가는 에너지 소모량이 적고, 바이오가스 생산면에서도 효과적으로 알려져있다. 따라서 본 연구에서는 생슬러지 및 잉여슬러지를 대상으로 60~120 ℃, 30~120분 조건에서 실시한 저온 열적전처리 공정에 의한 물리·화학적 특성 변화를 분석하고, BMP test를 통하여 바이오 가스 생산율을 평가하였다. 용존성 물질로 존재하는 SCODCr, NH4+, PO43-, VFAs 분석결과, 생슬러지 및 잉여슬러지 모두 열적전처리 온도가 상승함에 따라 증가하는 것으로 나타났다. 가용화율은 120 ℃ 120분조건에서 SCODCr의 경우 가용화 전 각각 453mg/L, 1,698mg/L에서 열적전처리 후 최대 5,337mg/L, 8,769mg/L로 증가하였으며, TCODCr 중 SCODCr가 각각 약 12%, 18.6%차지하는 것으로 나타났다. 따라서 저온열적가용화 또한 슬러지의 세포 floc 파괴에 의한 내부 물질의 용출에 기인하여 가수분해 단계를 촉진시켜 소화효율을 향상시킬 수 있다고 판단된다.

Present study evaluated the low-temperature destruction of n-hexane and benzene using mesh-type transition-metal platinum(Pt)/stainless steel(SS) catalyst. The parameters tested for the evaluation of catalytic destruction efficiencies of the two volatile organic compounds(VOC) included input concentration, reaction time, reaction temperature, and surface area of catalyst. It was found that the input concentration affected the destruction efficiencies of n-hexane and benzene, but that this input-concentration effect depended upon VOC type. The destruction efficiencies increased as the reaction time increased, but they were similar between two reaction times for benzene(50 and 60 sec), thereby suggesting that high temperatures are not always proper for thermal destruction of VOCs, when considering the destruction efficiency and operation costs of thermal catalytic system together. Similar to the effects of the input concentration on destruction efficiency of VOCs, the reaction temperature influenced the destruction efficiencies of n-hexane and benzene, but this temperature effect depended upon VOC type. As expected, the destruction efficiencies of n-hexane increased as the surface area of catalyst, but for benzene, the increase rate was not significant, thereby suggesting that similar to the effects of the reaction temperature on destruction efficiency of VOCs, high catalyst surface areas are not always proper for economical thermal destruction of VOCs. Depending upon the inlet concentrations and reaction temperatures, almost 100% of both n-hexane and benzene could be destructed. The current results also suggested that when applying the mesh type transition Metal Pt/SS catalyst for the better catalytic pyrolysis of VOC, VOC type should be considered, along with reaction temperature, surface area of catalyst, reaction time and input concentration.

The growth and extent of the local pressure field at any point is of primary importance as it supplies the driving force for the local wind circulation which causes a medium-range transport of air pollutants. The local pressure field is produced by the variation of temperature in the lower layers of the atmosphere, and is called the thermal wave. The thermal wave is influenced by the difference in the diurnal variations between two regions with different surface condition, for example land and sea. This difference produces the land- and sea-breeze phenomenon, and brings corresponding variations in the form of the thermal wave. Daytime temperature over the inland area (Daegu) was higher than that of the coastal area (Busan). The temperature difference reached about 5～6℃ in the late afternoon(30-31 May 1999). The low pressure system of Daegu was most fully developed at the time. In this study, we investigated the possibility of thermal low onset around Daegu in summer with an analytical model. The topography effect was neglected in the model. We could predict a thermal low-pressure of about 3.4hPa at Daegu with wide flat land surface, when the inland area is about 6K warmer than the coastal area temperature. The pressure decrease is somewhat less than the observed value(4～5hPa).