Non-uniform reinforced concrete brace facade systems are newly considered to improve seismic performance of reinforced concrete frame buildings under lateral load. For normal and high strength concrete of 30MPa, 80MPa, and 120MPa, the cross-sections of reinforced concrete brace facade systems were designed as different size with same amount of reinforcements. The strengthened frame systems were analyzed by a non-linear two-dimensional finite element technique which was considering material non-linearities of concrete and reinforcing bars under monotonic and cyclic loadings. From the study of non-linear analysis of the systems, therefore, it was provided that the proposed braced facade systems were reliable to improve laterally load-carrying capacity and minimize damages of concrete members through comparisons of load-displacement curves, crack patterns, and stress distributions of reinforcing bars predicted by current non-linear finite element analysis of frame specimens.

This study aimed to examine the recent Hanbok school uniform design directions to contribute to the distribution of Hanbok school uniforms and the accumulation of Hanbok-inspired fashion design sources. We reviewed 16 academic papers published on Hanbok school uniform designs from 1998 to 2023 and summarized the design features proposed therein. We also analyzed 172 items of Hanbok school uniform designs developed under the Hanbok school uniform promotion project hosted by the Hanbok Advancement Center between 2019 and 2022. We found that the recent Hanbok school uniform design characteristics conformed to the design directions proposed in previous studies in terms of line, color, fabric, and textile pattern. Conforming design characteristics include the following. Overall, silhouettes were straight and moderately fitting to the body. Detailed straight and curved lines from Hanbok were applied. Designs showed traditional Hanbok colors, including white, black, and navy. Machine washable cotton and various blended fabrics were used. Modernized traditional patterns such as Saekdong, cloud, and Gwae were applied to textile designs. In contrast, some characteristics of recent designs deviated from the proposed design directions. Barrel silhouettes were found in casual styles of uniform items, including sweatshirts, hoodies, and jumpers. A wider range of materials, including fleece, quilted fabric, brocade, and Jinju silk, were used. Uniforms had looser silhouettes and were made with modern washable materials to meet students’ preference for casual uniforms.

본 연구의 목적은 비만 남자고등학생의 교복바지에 대한 착용만족도를 높이고 맞음새가 좋은 교복바지의 패턴개발을 위한 자료를 제공하는 데 있다. 이 연구는 사이즈코리아(2015)의 직접 측정 데이터 중 BMI 지수가 18.5이상인 17~19세 남자 745명의 데이터를 분석 자료로 활용하였다. 비만 남자고등학생의 체형분류를 위하여 표준체형과의 신체치수 비교를 위해 기술통계를 실시하였으며, 비만 남자고등학생의 체형분류를 위한 요인분석, 군집분석, 분산분석 등의 통계방법이 사용되었다. 그 결과, 비 만 남자고등학생의 체형분류 요인으로는 하반신 부피요인, 하반신 길이 요인, 복부 부피요인, 밑위 길이요인의 4개 요인이 도출되었다. 또 군집 분석의 결과로 4가지의 비만체형 유형이 분류되었다. 유형1은 분류된 비만체형 유형 중 하반신의 길이가 가장 짧고 왜소한 비만체형이며 유 형2는 비만 유형 중 허리둘레가 가늘고 복부의 부피가 작아 약간 왜소 한 비만체형이다. 유형3은 하반신 길이는 보통 이상이며, 하지와 하반 신 둘레, 복부의 부피 등의 모든 항목에서 가장 큰 값을 보여 부피가 큰 고도 비만체형이다. 유형4는 4가지 비만 유형 중 하반신 길이는 가 장 길고, 복부의 비만 정도가 유독 큰 복부 비만체형으로 정의할 수 있으며, 비만 체형의 특징을 반영한 교복바지의 설계방법에 대한 후속 연구가 진행될 예정이다.

Civil defense originally refers to the protection of civilians in the events of war-related disasters. Today, it encompasses a wide range of protection, rescue, and recovery activities not only aimed at minimizing the damage caused by war but also addressing natural and man-made disasters such as wildfires, typhoons, and floods. Civil defense uniforms are worn by volunteers who participate in civil defense training organized by practitioners, government officials, and military personnel. Therefore, more than 3,350,000 persons (+6.5 % of the Korean population) likely should wear civil defense uniforms. As such, the functionalities of civil defense uniforms need to be reexamined and improved in response to the wider and newer responsibilities of the civil defense system to protect the civil defense personnel from potential hazards and to help better serve the Korean citizens. The essential functions of civil defense uniforms were proposed by analyzing various civil defense activities. Per the level and type of safety hazards, the design and materials for civil defense uniforms should ideally differ, similar to civil defense uniforms in other countries. We surveyed the current Korean civil defense uniforms’ design, material compositions and important functionalities such as water repellency, water pressure resistance, and flame resistance. Compared to common functional workwear, we suggest room for improvement in the functional properties of civil defense uniforms. This research paves a new road for the functional design of civil defense uniforms to address a wider range of hazards, potentially leading to rational guidelines for protective workwear and government uniform development.

A new dark brown variety of Flammulina velutipes, referred to as ‘Asakchoco’, was bred by crossing two monokaryons isolated from the ‘Yeoreumhyang2ho’ and ‘Guemhyang2ho’ varieties. The pileus color of the new variety is dark brown and the stipe color is ivory, with uniformity from the upper section to the base. In addition, the primordia formation is uniform compared to that of the control, and the advantage of this is that the pileus does not become deformed after the primordia formation. During bottle cultivation, the period necessary for mycelial growth was 40 d, for primordia formation was 8 d, and for fruiting body growth was 16 d. The total cultivation period was 64 d, which was 2 d shorter than that of the control. The pileus was smaller and thicker and the stipe diameter was the same, but the stipe length was longer than that of the control. The number of valid stipes per bottle was 441, 24% higher than that of the control (357), and the yield was 197 g, 19% higher than that of the control (166 g).

Transition-metal phosphides (TMPs), a promising anode material for lithium-ion batteries (LIBs), are limited in application because of its serious volume effect in the cycle. In this work, a simple electrospinning strategy was proposed to restrict the grain size of CoP nanocrystals by nano-confined effect of carbon nanofibers with ligands. The addition of ligands not only could realize the uniform dispersion of CoP nanocrystals, but also strengthen the bond between the metals and carbon nanofibers. As a result, the CoP/CNF composite exhibits excellent lithium storage performance, and its reversible specific capacity could reach 1016.4 mAh g− 1 after 200 cycles at a current density of 200 mA g− 1. The research is anticipated to provide a new idea for the preparation of anode materials for lithium ion batteries.

Electroless plating is widely utilized in engineering for the metallization of insulator substrates, including polymers, glass, and ceramics, without the need for the application of external potential. Homogeneous nucleation of metals requires the presence of Sn-Pd catalysts, which significantly reduce the activation energy of deposition. Therefore, rinsing conducted during Sn sensitization and Pd activation is a key variable for the formation of a uniform seed layer without the lack or excess of catalysts. Herein, we report the optimized rinsing process for the functionalization of Sn-Pd catalysts, which enables the uniform FeCo metallization of the glass fibers. Rinsing enables good deposition of the FeCo alloy because of the removal of excess catalysts from the glass fiber. Concurrently, excessive rinsing results in a complete removal of the Sn–Pd nucleus. Collectively, the comprehensive study of the proposed nanomaterial preparation and surface science show that the metallization of insulators is a promising technology for electronics, solar cells, catalysts, and mechanical parts.

Large-area graphene of the order of centimeters was deposited on copper substrates by low-pressure chemical vapor deposition (LPCVD) using hexane as the carbon source. The effect of temperature and the carrier gas flowrates on the quality and uniformity of the as-deposited graphene was investigated using the Raman analysis. The film deposited at 870 °C with a total carrier gas flowrate of 50 sccm is predominantly single-layer with very low defects according to the Raman spectra. The 2D/G peak intensity ratios obtained from the Raman spectra of samples from three different locations of graphene deposited on a whole copper catalyst was used to calculate the large-area uniformity. Based on the results, a very high uniformity of 89.6% was calculated for the graphene deposited at 870 °C. The uniformity was observed to decrease with increasing temperature. Similar to the thickness uniformity, the electrical conductivity values obtained as a result of I–V measurements and water contact angle measurements were found to be close to each other for the graphene deposited under the same deposition conditions.

Uniform scions and rootstocks should be produced to ensure grafting success. Light quality is an important environmental factor that regulates seedling growth. The effects of warm- and cool-white light emitting diode (LED) ratios on seedling growth were investigated. Scions and rootstocks of cucumber, tomato, and watermelon were grown in a closed transplant production system using LED as the sole lighting source. The LED treatments were W1C0 (only warm-white), W1C1 (warm-white: cool-white = 1:1), W3C1 (warm-white: cool-white = 3:1), and W5C2 (warm-white: cool-white = 5:2). The seedlings grown in W1C1 had the shortest hypocotyls, and the seedlings grown in W1C0 had the longest hypocotyls among the three tested vegetables. The hypocotyls of watermelon scions, watermelon rootstocks, and tomato rootstocks were shortest in W1C1, followed by those in W3C1, W5C2, and W1C0, but there was no significant difference between W3C1 and W5C2, which remained the same as the ratio of cool-white LEDs increased. In addition, tomato scions had the first and second longest hypocotyls in W1C0 and W3C1, respectively, and the shortest hypocotyls in W5C2 and W1C1, along with W5C2 and W1C1, although the difference was not significant. The stem diameter was highest in W1C0 except for tomato seedlings and rootstocks of watermelon. The shoot fresh weight of scions and rootstocks of cucumber and watermelon and the root fresh weight of cucumber scions were lowest in W1C1. These results indicated that different ratios of LED lighting sources had a strong effect on the hypocotyl elongation of seedlings.

The purpose of this study was to examine the current satisfaction levels with nurse uniforms at Taizhou General Hospital in China and to find areas for improvement in order to develop nurse uniforms with improved comfort, fit and convenience. To investigate satisfaction with nurse uniforms, a survey was conducted of 150 nurses. The general characteristics of the nurses, uniform conditions, feelings of satisfaction, fit, preferred designs, inconvenient aspects of the uniforms, and areas for improvement were analyzed. Eight materials of cotton/polyester blended fabrics were selected according to Chinese nurse uniform regulations, and the physical properties of the materials were tested along with the materials used in current nurse uniforms. Four new nurse uniforms with increased aesthetics, functionality, and comfort were developed based on the survey results. Materials with excellent absorption, moisture permeability, and ventilation were used as main fabrics. According to the preferred designs of nurses at Taizhou City General Hospital, China, 4 types of nurse uniforms designed, consisting of design 1 (shirt and pants), design 2 (shirt and pants), design 3 (dress), and design 4 (shirt and skirt). The new nurse uniforms offered better functionality with an improved fit at the armpits, waist, hips, and knees based on product measurements.

Using lanthanum zinc oxide (LZO) film with the ion-beam irradiation, uniform and homogeneous liquid crystal (LC) alignment was achieved. To fabricate the LZO thin film on glass substrate, solution process was conducted as a deposition method. Cross-polarized optical microscopy (POM) and the crystal rotation method reveal the state of LC alignment on the ion-beam irradiated LZO film. Between orthogonally placed polarizers, POM image showed constant black color with regular transmittance. Furthermore, collected incidence angle versus transmittance curve from the crystal rotation method revealed that the LC molecules on the ion-beam irradiated LZO film were aligned homogeneously. Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were conducted to reveal the relationship between the ion-beam irradiation and the LC alignment. The ion-beam irradiation changed the LZO film surface to rougher than before by etching effect. Numerical roughness values from AFM analysis supported this phenomenon specifically. XPS analysis showed the chemical composition change due to the ion-beam irradiation by investigation of O 1s, La 3d and Zn 2p spectra. The ion-beam irradiation induced the breakage of chemical bonds in the LZO film surface and this occurred surface chemical anisotropic characteristics for uniform LC alignment.

The purpose of this study was to develop a workwear design that takes into account the characteristics of people with severe developmental disabilities who can engage in vocational activities. The aim was to identify needs according to the specific characteristics of people with severe disabilities to design work clothes and develop products according to universal design guidelines. This research method was conducted through representative interviews from a company employing people with severe disabilities in Daegu to determine the requirements for workers-related work clothes, and then applied universal design guidelines to perform appropriate design. The results of the study show that the hygiene and warmth of clothing are important for people with developmental disabilities. Therefore, the use of bright materials is required. Second, people with brain lesions often have low body temperature due to difficulties with blood circulation, for which warmth is a required factor. Third, people with severe developmental disabilities should not be differentiated in comparison to people without disabilities, therefore, it was important to use nondiscriminatory designs. Accordingly, it was more efficient to modify and supplement clothing designed for non-disabled people with hidden functions to suit specific characteristics, rather than to develop specialized clothing. These demands were found to conform to what is referred to as a universal design concept, through which three nondiscriminatory shirt designs and two easy-to-use pants were designed.

Various electronic control parts and devices installed in electric vehicles have greatly improved the convenience of occupants, but electromagnetic waves emitted from electronic devices have greatly increased concerns about malfunctions, deterioration of performance, safety accidents, etc. There are two models of analysis. Case A is symmetrical about one axis of rotation. Case B has two axes of rotation. In this study, a flow analysis was conducted to find excellent flow conditions in the mixing process to develop a paint with excellent electromagnetic shielding and thermal insulation performance. The results of the flow analysis are reflected in manufacturing specifications and are intended to be used to develop high-quality systems.

In this experiment, the engine (i30 FD) was fabricated and installed in front of the intake manifold of the gasoline engine of the 2010 1,600cc MPI(Multi Point Injection) 4-cylinder 16-valve DOHC(Double Over Head Camshaft) electronic control fuel injection system, and the plenum chamber was 150cc, 300cc, 4. The engine rotation speed was increased from 1000rpm to 3000rpm by 500rpm, and the pressure change and engine volume efficiency change of the air intake manifold runner were analyzed. In this study, the volume of air flowing into the cylinder was maximized through the stabilization of pressure vibration in the intake manifold runner part due to the engine operation condition and the volume change of the intake manifold plenum chamber, and the uniform distribution rate of the intake air was confirmed by minimizing the interference between the cylinders. It has in the purpose to analyze the flow characteristic at the intake manifold inside. It can apply to obtain the optimal design factor.

Tungsten oxide(WO3) films with uniform surface morphology are fabricated using a spin-coating method for applications of electrochromic(EC) devices. To improve the EC performances of the WO3 films, we control the heating rate of the annealing process to 10, 5, and 1 oC/min. Compared to the other samples, the WO3 films fabricated at a heating rate of 5 oC/min shows superior EC performances for transmittance modulation(49.5 %), response speeds(8.3 s in a colored state and 11.2 s in a bleached state), and coloration efficiency(37.3 cm2/C). This performance improvement is mainly related to formation of a uniform surface morphology with increased particle size without any cracks by an optimized annealing heating rate, which improves the electrical conductivity and electrochemical activity of the WO3 films. Thus, the WO3 films with a uniform surface morphology prepared by the optimized annealing heating rate can be used as a potential candidate for performance improvement of the EC devices.

This paper presents the design, analysis, and experimental evaluations of precast reinforced UHPC (ultra high-performance concrete) beams with a new design concept of non-uniform flexural members. With outstanding mechanical properties of UHPC which can develop the compressive strength up to 200MPa, the tensile strengths up to 8~20MPa and the tensile strain up to 1~5%, a non-uniform structural shape of UHPC flexural beams were optimally designed using three-dimensional finite element analysis. The experiments were carried out and compared with the design strength in order to verify the performance of them. Proposed non-uniform UHPC beams were evaluated by a series of three-point beam loading test as well as estimated by design bending and shear strength of members. The newly designed UHPC beams show excellent performances not only in transverse load capacities but also in deformation capacities.

In current research, it was attempted a preliminary design and evaluation of non-uniform ultra high-strength concrete (UHSC) truss members. UHSC used here has the compressive strength of 180 MPa, the tensile strength of 8 to 20 MPa, and the tensile strain after cracks up to 2%. By the three-dimensional finite element stress analysis as well as strut-tie approach on concrete solid beams, the non-uniform truss shape of UHSC truss was designed with the architectural esthetic concept. In a series of examples, to compare with conventional concrete members, the proposed UHSC truss members have advantages in capabilities of the slender design with minimum weight with high performances under transverse loadings as well as the aesthetically non-uniform design for spatial structures.