This study aims to analyze the traditional attire of four ethnic minority groups in Northeastern China: Daur, Ewenki, Oroqen, and Hezhen, considering their natural environment, lifestyles, and cultural influences. A literature review of academic papers, books, and online resources was conducted, along with indirect investigations through artifacts. The Daur people, being equestrian, have garments with deep slits, vibrant colors, and elaborate decorations. The Ewenki people wear clothes made of fabric in the summer and primarily deer skin in the winter, and their clothing is simple and not flashy. The Oroqen people’s clothing typically has slits at the front, back, or on both sides, and they wear a waist belt. The Hezhen people, an ethnic group that primarily hunts and fishes, wear two-piece clothing with a hip-length top and pants or other fur-trimmed garments. All groups incorporate symbolic patterns influenced by Shamanism, along with animal headgear and leather shoes. We observed that the traditional costumes of ethnic minority groups in Northeastern China share many commonalities in form, but there are detailed differences in material, shape, color, and decoration due to unique geographical and climatic characteristics as well as differences in livelihood. Additionally, the structure of clothing varies depending on each tribe’s shamanistic practices and lifestyle.

The purpose of this study is to classify the body types of obese men in their 50–60s and compare them with those of obese middle-aged men in their 30–40s. The 3D anthropometric data of obese men aged 50 to 60 years from the 6th Size Korea. The data are analyzed using SPSS 25.0 for Windows, and descriptive statistics, χ2 test, correlation analysis, and cluster analysis are used to classify obese body types. As a result of the study, five factors are extracted to determine body types, which are classified into three obese body types through cluster analysis. 1) a large physique and consequently large circumference and height; 2) A short upper body length, short height, and thick belly; 3) the lowest rate of obesity and relatively flat abdominal curve. For the 30–40s group, Type1 showed the highest rate at 55.6%, whereas for the 50s group, Type3 showed the highest rate at 49.3%, and for 60s group, Type2 showed the highest rate at 41.2%. The classification accuracy of the discriminant function for each type is 94.7%, indicating relatively high accuracy. Furthemore, the recently changed obese body type are analyzed by comparing it with the 3D anthropometric data of 8th Size Korea, which will contribute to the utilization of basic data for manufacturing apparel for obese men.

The purpose of this study was to examine the current satisfaction levels with nurse uniforms at Taizhou General Hospital in China and to find areas for improvement in order to develop nurse uniforms with improved comfort, fit and convenience. To investigate satisfaction with nurse uniforms, a survey was conducted of 150 nurses. The general characteristics of the nurses, uniform conditions, feelings of satisfaction, fit, preferred designs, inconvenient aspects of the uniforms, and areas for improvement were analyzed. Eight materials of cotton/polyester blended fabrics were selected according to Chinese nurse uniform regulations, and the physical properties of the materials were tested along with the materials used in current nurse uniforms. Four new nurse uniforms with increased aesthetics, functionality, and comfort were developed based on the survey results. Materials with excellent absorption, moisture permeability, and ventilation were used as main fabrics. According to the preferred designs of nurses at Taizhou City General Hospital, China, 4 types of nurse uniforms designed, consisting of design 1 (shirt and pants), design 2 (shirt and pants), design 3 (dress), and design 4 (shirt and skirt). The new nurse uniforms offered better functionality with an improved fit at the armpits, waist, hips, and knees based on product measurements.

고용량 배터리에 대한 요구가 증가에 따라 기존 음극재보다 높은 용량(3,860 mAh/g)과 낮은 전기화학적 전위(– 3.040 V)를 갖는 리튬 금속 기반 음극재에 대한 연구가 활발하게 이루어지고 있다. 본 연구에서는 수열 합성을 통해 제작된 아나타제(anatase) 타입의 TiO2 나노 입자 기반한 PVdF-HFP/TiO2 복합체를 리튬 금속 음극의 계면 보호층으로 적용하였다. 결정구조 및 형상 분석을 통해 유/무기-리튬 나노복합체 박막의 형성을 확인하였다. 또한, 전지화학 테스트(사이클 테스트 및 전압 프로파일)를 통해 리튬 금속 음극의 전기화학 성능은 복합체 보호막이 TiO2 10 wt%, 코팅 두께 1.1 μm의 조건에서 가장 개선된 전기화학적 성능(콜롱 효율 유지: 77 사이클 동안 90% 이상) 발현을 확인하였다. 이를 통해, 처리하지 않은 리튬 전극 대비 본 보호층에 의한 리튬 금속 음극의 성능 안정화/개선 효과가 검증되었다.

This study aims to contribute to the development of sports wearables. It was conducted by a convergence team of professionals in the fashion industry, kinesiology and sports studies, and computer science and engineering. The purpose of the current study was to design and develop a fabric-type fitness band for a sensor to measure acceleration during jump rope exercises. Computer science and engineering professionals developed the Arduino board and sensor, kinesiology and sports studies provided the necessary exercise protocol, and the fashion industry professionals developed the band. First, a fitness band preference survey was completed by men and women between the ages of 20 and 50. Typical uses of the band included tracking exercise amount as measured by the number of steps taken and calories burned. Strap watch closure, a single color and achromatic color, and soft and smooth touch materials were preferred as band design. Second, two fabric-type fitness bands were designed and developed. Design 1 had a 3-dimensional pocket for the sensor, bright blue color, and stretch binding around the edges and for a loop. Design 2 had a flat pocket for the sensor, achromatic color, mesh binding around the edges and two metal loops. Both designs had Velcro as a closure. Third, wear testing of both bands with the sensor were conducted of 15 women in their 20s. They wore the bands during jump rope exercises. Both bands generally satisfied the participants. The Design 2 band was slightly more satisfying than the Design 1 band.

The study purpose was to investigate the jacket-fit satisfaction level of men in their 20s and 30s, using body-scanning data and a questionnaire. Thirty-five men were scanned using a 3D body scanner. The participants were divided into three groups (Small, Medium, and Large) based on their chest-circumference measurement. Their levels of satisfaction with the fit of their tailored jacket were compared by group. Chest, waist, and hip circumferences increased substantially as group size increased. The M-group was mostly satisfied with all body-site views. The S-group was especially dissatisfied with height, back width, waist circumference, and upper-arm circumference. The L-group was especially dissatisfied with waist circumference and hip circumference. The majority of the participants preferred the jacket closely fitted to their body. More than half of the participants thought finding a jacket of suitable size was difficult. When purchasing ready-to-wear jackets, the S-group and the M-group considered shoulder width important, while the L-group considered chest circumference the most important area. When evaluating the fit of ready-to-wear jackets, the L-group evaluated chest circumference, back width, and waist circumference as poor fits. The M-group evaluated sleeve length and shoulder width as poor fits, and the S-group agreed with respect to sleeve length. Body-satisfaction levels and matching jacket-satisfaction levels differed by body-size group, as did areas that need improvement. The conclusion is that size-group analysis using 3D body scanning can be utilized effectively for jacket-fit analysis. The findings of the current study can be applied to improving jacket fit among young male consumers.

Firefighting hoods protect the head, face, and neck areas of officials while they perform firefighting services. The purpose of this study is to investigate the head size of Korean firefighting officials in order to establish the dimensions necessary to construct firefighting hoods. A total of 98 male firefighting officials participated in this study and 11 body dimensions, necessary for the construction of firefighting hoods, were measured. The data collected from the firefighting officials were compared to the general adult male data from the Size Korea national anthropometric study. The heights, weights, head circumferences, head heights, and bitragion arcs of the firefighters were significantly larger than those of general adult males, which shows that firefighting officials generally have larger body and head sizes than general adult males. Based on the results of Pearson's correlation coefficients, head circumference and head height were judged to be the important measurements for the construction of the firefighting hoods. Thus, these two measurements were chosen as the basic dimensions of the cross tabulation analysis. As a result, head circumferences of 57.00~60.99cm and head heights of 23.00~25.99 cm were found to be important measurement ranges among the firefighters. This study is expected to be used as the basis for the creation of firefighting hoods that help to ensure the safe rescue activities for firefighting officials.

The purpose of this study was to classify the upper torso body types of obese Korean adult women using the 7th Korea National Anthropometric Study data and compare the body type differences according to three age groups: 20s～30s, 40s～50s, and 60s. A total of 548 adult women whose BMI was in the obese range of 25 or higher and whose age ranged from 20s to 60s were selected from the anthropometric database. Twenty-nine body measurements related to torso and arm areas important for torso and sleeve pattern development were chosen. Five drop values by differences between bust, waist, and hip circumferences were also chosen for analysis. The number of obese women increased with age. The results revealed seven factors according to the factor analysis and three obese body types based on the cluster analysis. Body type 1 (47.3% of obese women) was characterized by narrow shoulders, a small or medium torso, and a straight waist. Body type 2 (42.4% of obese women) was characterized by a defined waist and a larger lower torso than upper torso. Body type 3 (10.3% of obese women), the largest obese body type among the three types, was characterized by a large bust, large abdomen area, and long upper torso. Women in their 20s to 30s were most likely to have body type 2, women in their 40s to 50s were evenly distributed between body types 2 and 3, and women in their 60s were most likely to have body type 1.

The purpose of this study was to investigate preferences and satisfaction levels in maternity and nursing brassiere. A questionnaire was conducted on 302 women from their 20s to 40s who had breastfeeding experience. The questionnaire included questions on participant demographics, purchase behavior, and design preference and satisfaction levels. The majority(98.0%) of the participants had had experience using maternity/nursing brassieres. More than 90% of the participants agreed with the need for maternity/nursing brassieres distinct from regular ones. Shopping online was the most common means of purchasing them. The most and second-most owned fastener types were the detachable shoulder belt type and inside-cup type, respectively. The most selected reason for purchasing or wearing a maternity/nursing brassiere was the convenience of donning and doffing the brassiere during breastfeeding. Participants had lower satisfaction levels with how well maternity/nursing brassieres support and center the breasts, and with the variety of designs available on the market. Respondents indicated that fasteners for breastfeeding should be developed to provide comfort and convenience for breastfeeding. Wearing comfort was reported as the most important factor in purchasing selection, both during the pregnancy and breastfeeding periods. No-wire, back closure, full-cup, U-shape wing, and skin color were the most preferred design styles.

The purpose of this study was to investigate preferences and satisfaction levels in maternity and nursing brassiere. A questionnaire was conducted on 302 women from their 20s to 40s who had breastfeeding experience. The questionnaire included questions on participant demographics, purchase behavior, and design preference and satisfaction levels. The majority(98.0%) of the participants had had experience using maternity/nursing brassieres. More than 90% of the participants agreed with the need for maternity/nursing brassieres distinct from regular ones. Shopping online was the most common means of purchasing them. The most and second-most owned fastener types were the detachable shoulder belt type and inside-cup type, respectively. The most selected reason for purchasing or wearing a maternity/nursing brassiere was the convenience of donning and doffing the brassiere during breastfeeding. Participants had lower satisfaction levels with how well maternity/nursing brassieres support and center the breasts, and with the variety of designs available on the market. Respondents indicated that fasteners for breastfeeding should be developed to provide comfort and convenience for breastfeeding. Wearing comfort was reported as the most important factor in purchasing selection, both during the pregnancy and breastfeeding periods. No-wire, back closure, full-cup, U-shape wing, and skin color were the most preferred design styles.

The purpose of this study was to investigate students’ satisfaction with, perceived ease of movement of, and perceived fit of high school girls’ uniforms according to the uniform design. “P” high school, with a one-piece dress-type uniform, and “H” high school, with a two-piece type uniform, were selected for this study. Sixty-five female students from each school participated in the study. The questionnaire was composed of 21 questions about the school uniforms’ purchase behavior, design, fit, ease of movement, and modification and participants’ demographic information. Students from both schools were generally satisfied with the uniform design. However, in the open-ended response section, many “P” high school students responded that the fact that the one-piece dress pulled up when sitting or raising the hand made it uncomfortable. On the other hand, “H” high school students responded that the skirt was uncomfortable, because it left the body or underwear exposed when the wind blew due to the many pleats in the skirt. In the assessment of the ease of movement, “P” high school students were more likely to describe the uniform as uncomfortable than “H” high school students. Many students responded that they modified their school uniforms, and the length of the skirt and one-piece dress was the main part that was modified. This study suggests that growing female high school students are unsatisfied with the school uniforms’ design and fit. Additionally, the perceived fit and satisfaction levels depend on the uniform design.

The apparel industry has recently been recognizing the important target market of middle-aged women. The aim of this study was to examine the anthropometric characteristics of US women of 46 to 65 years of age and identify distinctive body shape characteristics of US middle-aged women. A total of 1915 middle-aged women whose ages ranged from 46 to 65 were selected from the SizeUSA database. The age range was divided into two groups: 46-55 and 56-65. Twenty-four body measurements important for apparel development were chosen. Four factors—Girth Factor, Height Factor, Hip Drop Factor, and Bust Drop Factor—accounted for the US middle-aged women’s body measurements. The body shapes were classified into four body shapes, which were Y-Shape in the overweight range, S-Shape in the overweight range, H-Shape in the overweight range, and the A-Shape in obese range. H-Shape, which was the least-defined waist in relation to the bust and hips with a short height, existed more in older middle-aged women than in younger middle-aged women. Y-Shape, S-Shape, and A-Shape existed more in the group of younger middle-aged women than in the group of older middle-aged women. In addition, compared with the younger middle-aged women, older middle-aged women had narrower shoulders, a larger waist, thinner legs, and a longer distance between side neck to bust point. The findings from the current study may be applied in the apparel industry for developing clothing sizing systems for US middle-aged women.

본 연구에서는 영양과 건강, 그리고 편의성까지 고려한 즉석식품 형태의 쌀미음을 제조하였다. 제조된 쌀미음 분말의 영양성분 구성비를 일반성분 분석을 통하여 분석 하였고, 과립공정에 따른 재수화능의 향상을 연구하였다. 과립분말은 혼합분말보다 지방함량과 단백질 함량이 각각 0.9, 1.9% 높게 나타난 반면, 탄수화물 함량은 상대적으로 3.2% 낮게 나타났다. 과립분말의 단백질 조성은 71.1-118.5 g으로 1일 권장 단백질 섭취량 45-55 g보다 많았는데, 이는 일반적인 환자식이 지니는 공통적인 특성이다. 분말 입자의 침강 속도를 보여주는 분산성의 경우 과립분말(93.7%)은 혼합분말(77.0%) 보다 높게 나타났고, 재수화에 걸리는 시간도 과립분말(122.3 초)이 혼합분말(305.3 초)보다 빨랐으며 이들 결과는 과립공정이 분말의 재수화능을 향상시켜 주었음을 보여준다. 호화쌀가루를 이용한 쌀미음은 기존의 우유 단백질 위주의 환자식을 곡류로 대체하며 영양강화 쌀 가공제품의 개발에 의미가 있다.

Angelicae gigantis Radix (dried root of Angelica gigas) including major bioactives such as decursin and decursinol angelate provides rich flavors and several healthy benefits. Recent studies have shown that ultrafine powders of herbal medicines provide better physical properties and biological activities. Thus, ultrafine Angelica powder was added into the oligosaccharide syrup to provide flavors and healthy benefits in this study. Angelicae gigantis Radix was pulverized into d(0.1) = 3.220, d(0.5) = 7.822, and d(0.9) = 7.817 μm respectively using an air-flow mill. The ultrafine Angelica powder was added into the oligosaccharide syrup process with different ratios of water to oligosaccharide syrup at 1:5, 1:8, 1:11, and 1:14. The physicochemical properties such as viscosity and bulk density were measured. The Stokes’ law was applied to predict the sedimentation velocity of the added Angelica powder in the syrup. The Angelica syrup prepared in this experiment showed good stability since the Angelica particles precipitated down slowly. The ratio of water to oligosaccharide syrup at 1:11 showed the optimal preparation in terms of the stability and the viscosity. The ultrafine-sized herbal powders such as Angelicae gigantis Radix have potentials for various food and pharmaceutical applications.

This study takes shear wall of reinforced concrete structure as study object, and the purpose of this study is to suggest structure BIM based on automatic reinforcing bar placement system applying set-based design through the most optimum reinforcing bar placement group that was selected by applying AHP (analytical hierarchy process) method from design step. For this, the most optimum reinforcing bar placement group was selected by pairwise comparison analysis on complex standard of multiple alternatives. And shear wall automatic reinforcing bar placement system has been developed, which can automatically generate members and arrange reinforcing bar by structure design algorithm and using open API (application programming interface) provided by a BIM software vendor. As a result, the most optimum reinforcing bar placement group of the highest weight, ALT1, was selected and was generated using Tekla Structure program.