Micro bubbles are widely used in many cases such as agriculture, fishery, skin care, prevention of water pollution. A high pressure compressor which is one of part of a micro bubble generating system is needed to generate these micro bubbles. The purpose of this research is the development of a high pressure compressor which is achieve following conditions; discharge flow 0.6ℓ/min, maximum air flow 2ℓ/min, discharge pressure 5bar. To achieve these conditions, we optimized the geometry of cylinder and piston, clearance volume, compression ratio, power of operating motor experimentally. Moreover, we minimized the compressor which is the biggest part of a micro bubble generating system so that we could minimized the size of entire system.

Abstract
 1. 서론
 2. 연구개발 범위 및 방법
 3. 개발 내용과 성능시험 결과
  3.1 압축기 개발 내
  3.2 압축기 성능시험 결과
 4. 결론
 참고문헌

• 강기중(순천대학교, 기계우주항공공학부) | K.J. Kang
• 박주용(순천대학교, 기계우주항공공학부) | J.Y. Park
• 이기만(순천대학교, 기계우주항공공학부) | K.M. Lee 교신저자