Freeze drying for porous Mo was accomplished by using MoO3 powder as the source and camphor-naph- thalene eutectic system as the sublimable material. Eutectic composition of camphor-naphthalene slurries with the initial MoO3 content of 5 vol%, prepared by milling at 55o C with a small amount of oligomeric dispersant, was frozen at -25o C. The addition of dispersant showed improvement of dispersion stability in slurries. Pores were generated subse- quently by sublimation of the camphor-naphthalene during drying in air for 48 h. To convert the MoO3 to metallic Mo, the green body was hydrogen-reduced at 750o C, and sintered at 1100o C for 2 h. The sintered samples, frozen by heated Teflon cylinder, showed large pores with the size of about 40 µm which were aligned parallel to the sublimable vehicles growth direction. The formation of unidirectionally aligned pores is explained by the rejection and accumulation of solid particles in the serrated solid-liquid interface.

• 이규태(Department of Materials Science and Engineering, Seoul National University) | Gyu-Tae Lee
• 서한길(Department of Materials Science and Engineering, Seoul National University) | Han Gil Seo
• 석명진(Department of Materials and Metallurgical Engineering, Kangwon National University) | Myung-Jin Suk
• 오승탁(Department of Materials Science and Engineering, Seoul National University) | Sung-Tag Oh Corresponding Author