논문 상세보기

제올라이트와 벤토나이트를 이용한 중금속 흡착 특성 KCI 등재

Studies on Adsorption of Heavy Metals with Zeolite and Bentonite

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/247768
서비스가 종료되어 열람이 제한될 수 있습니다.
광물과 암석 (Korean Journal of Mineralogy and Petrology)
한국광물학회 (The Mineralogical Society Off Korea)
초록

본 연구는 포항과 경주 일대에서 채취한 제올라이트와 벤토나이트의 광물조성과 입자 크기에 따른 중금속 흡착정도를 파악하는 것이다. 제올라이트 시료의 주 구성광물은 모데나이트, 크라이놉틸로라이트, 휼란다이트 등이며, 벤토나이트 시료는 주로 몬모릴로나이트로 구성되어 있다. 흡착 실험에 사용한 중금속은 Cd, Cr, Cu, Mn, Pb로 10 ppm과 20 ppm의 두 가지 농도를 이용하여 실험을 실시하였다. 대부분의 시료는 Cr을 제외한 다른 중금속에서 평균 80% 이상의 흡착율을 나타내며, Pb는 95% 이상의 흡착율 보였다. 제올라이트가 벤토나이트 시료보다 중금속 이온의 흡착에 더 효과적이며, 중금속의 농도가 높은 경우 흡착율이 감소하는 경향을 나타낸다.

This study was carried out to determine the effects of mineral composition and grain size of zeolite and bentonite from Po-hang and Kyung-ju, South Korea on the adsorption of heavy metals. Zeolite specimen consists mainly of mordenite, clinoptilolite, heulandite etc. And bentonite specimen is mainly composed of montmorillonite. Five heavy metals, Cd, Cr, Cu, Mn, and Pb were used to conduct the relevant adsorption experiments with the fixed concentrations of 10 ppm and 20 ppm, respectively. Host specimens excluding specimen for Cr resulted in the adsorption rate over average 80 percent, and over 95 percent for Pb. This study indicates that zeolite is more efficient in the adsorption of the heavy metals than bentonite, and its adsorption rate tends to decrease with increasing concentration of the heavy metals.

저자
  • 강한 | Kang, Han
  • 박성민 | Park, Sung-Min
  • 장윤득 | Jang, Yun-Deuk
  • 김정진 | Kim, Jeong-Jin