논문 상세보기

자망에 대한 대게 수컷의 망목 선택성 KCI 등재

Size selectivity of gill net for male snow crab, Chionoecetes opilio

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/256431
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
수산해양기술연구 (Journal of the Korean Society of Fisheries and Ocean Technology)
한국수산해양기술학회(구 한국어업기술학회) (The Korean Society of Fisheriers and Ocean Technology)
초록

본 연구에서는 자망에 대한 대게 수컷의 망목선택성을 구명하기 위하여 5종류의 망목 (m = 180, 210, 240, 270, 300㎜)으로 구성된 자망을 제작하고, 2002년 1월부터 2003년 3월까지 경북 죽변항 주변 수역에서 총 12회의 시험조업을 행하였다. 망목선택성 곡선의 계산에 사용될 데이터 확보를 위하여 어획된 대게 수컷의 전수에 대한 최대갑장 RL을 디지털 켈리퍼스를 사용하여 0.1㎜ 단위로 측정하였다. 망목선택성 곡선의 추정에는 Kitahara의 방법을 사용하였다. 대수 망목선택성 곡선의 함수로써 좌우대칭형인 2차식과 좌우비대칭형인 3 차식을 적용하였으며, 최소지승법을 사용하여 각 모델의 파라미터를 추정하였다. 본 연구에서 얻어진 결과를 요약하면 다음과 같다. 1. 자망에 대한 대게 수컷의 망목선택성 곡선은 Model 의 적합도 비교를 통하여 좌우비대칭형인 3 차식이 선택되었다. 2. 망목선택성의 결과는 망목이 커질수록 소형 수게의 혼획이 감소한다는 것을 나타낸다. 3. 망목선택성 곡선은 이하의 수식으로 표현된다. S(R) = S(RL/m) = exp ((44.06 R³- 84.16 R²+ 52.30 R-5.46) - 5.17) 4. 선택률 1을 나타내는 최적 RL/m의 값은 0.549이며, 선택률 0.5, 0.25, 0.2를 나타내는 RL/m은 각각 0.356, 0.296, 0.281로 추정되었다.

A series of fishing experiments was carried out in the waters off the east coast of Korea from January, 2002 to March, 2003, using gill nets of different mesh sizes (m = 180, 210, 240, 270, and 300 ㎜) to determine the size selectivity of gill net for male snow crab Chionoecetes opilio. The maximum carapace length (RL) of each male snow crab caught in the fishing experiment was measured. The master curve of mesh selectivity was estimated by applying the extended Kitahara's method. Two kinds of functional models, quadratic function and cubic function were used to express logarithmic selectivity curve and were fitted to the data using the method of least squares. The obtained results were summarized as follows; 1. The cubic function of asymmetry was chosen to determine the selectivity curve of gill net for male snow crab from the model deviance comparison. 2. The result of size selectivity showed that the catch number of small male crab was getting decreased according to the increase of mesh size. 3. The optimum value (RL/m) was 0.549 and the RL/m was estimated to be 0.281, 0.296, and 0.356 when the retention probability were 0.2, 0.25 and 0.5, respectively.

저자
  • 박창두
  • 안희춘
  • 조삼광
  • 백철인