The objective of this study was to investigate the possibility of application for water treatment using the zeocarbon. The zeocarbon was mixture of zeolite and activated carbon. In general, the application of commercial zeocarbon to water treatment is difficult because of weak strength in water and the high pH value of effluents after water treatment. Therefore, we have modified the surface of zeocarbon. For the surface modification, we used the acid treatment to make surface functional group. As a result of modification, was created functional group on zeocarbon surface and was formed mesopore in zeocarbon. The surface modified zeocarbon was applied to removal of nitrogen. In removal experiments of nitrogen, removal efficiency was very high. And, strength of zeocarbon after water treatment and pH of effluents were stabilized. This indicates that the surface modified zeocarbon was easy to recover and reuse. Consequently, our results were shown the possibility of application for water treatment using the surface modified zeocarbon.

• Seo-A Kim(Applied & Engineering Chemistry Division, Korea Research Institute of Chemical Technology)
• Ji-Sook Hong(Applied & Engineering Chemistry Division, Korea Research Institute of Chemical Technology)
• Jeong-Kwon Suh(Applied & Engineering Chemistry Division, Korea Research Institute of Chemical Technology)
• Jung-Min Lee(Applied & Engineering Chemistry Division, Korea Research Institute of Chemical Technology)